[PATCH] PCI: Init NumVFs register to zero in sriov_init()
From: ethan.zhao
Date: Wed Nov 06 2013 - 09:50:43 EST
Though no specification about NumVFs register initial value after POST, to void the confusion
lspci output as following before VF was enabled, we should clear the NumVFs value left by BIOS
to zero:
$lspci -vvv -s 03:00.0
Ethernet controller: Intel Corporation 82599EB 10-Gigabit SFI/SFP+ Network Connection (rev 01)
~
Capabilities: [160 v1] Single Root I/O Virtualization (SR-IOV)
IOVCap: Migration-, Interrupt Message Number: 000
IOVCtl: Enable+ Migration- Interrupt- MSE+ ARIHierarchy+
IOVSta: Migration-
Initial VFs: 64, Total VFs: 64, Number of VFs: 64, Function Dependency Link: 00
^dazed !
~
Signed-off-by: ethan.zhao <ethan.kernel@xxxxxxxxx>
---
drivers/pci/iov.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
index de8ffac..a4941ad 100644
--- a/drivers/pci/iov.c
+++ b/drivers/pci/iov.c
@@ -439,6 +439,8 @@ static int sriov_init(struct pci_dev *dev, int pos)
found:
pci_write_config_word(dev, pos + PCI_SRIOV_CTRL, ctrl);
+ /* VF Enable is cleared, so we could init the NumVFs register to 0 */
+ pci_write_config_word(dev, pos + PCI_SRIOV_NUM_VF, 0);
pci_read_config_word(dev, pos + PCI_SRIOV_VF_OFFSET, &offset);
pci_read_config_word(dev, pos + PCI_SRIOV_VF_STRIDE, &stride);
if (!offset || (total > 1 && !stride))
--
1.8.3.4 (Apple Git-47)
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/