RE: [PATCH 1/1] cpufreq: cpufreq-cpu0: use the max voltage insteadof voltage-tolerance
From: Rongjun Ying
Date: Wed Nov 06 2013 - 22:39:00 EST
> -----Original Message-----
> From: Shawn Guo [mailto:shawn.guo@xxxxxxxxxx]
> Sent: Thursday, November 07, 2013 10:27 AM
> To: Rongjun Ying
> Cc: Viresh Kumar; rjying; Rafael J. Wysocki; cpufreq@xxxxxxxxxxxxxxx;
> linux-pm@xxxxxxxxxxxxxxx; Linux Kernel Mailing List; Barry Song
> Subject: Re: [PATCH 1/1] cpufreq: cpufreq-cpu0: use the max voltage
> instead of voltage-tolerance
>
> On Thu, Nov 07, 2013 at 01:55:21AM +0000, Rongjun Ying wrote:
> > > For given board, what voltages could be provided is known. So you
> > > can just define OPP table in <board>.dts and specify the voltage as
> > > the value that the regulator IC can supply, e.g. 1.200V in above
> example.
> > >
> > > This is not nice, as OPP table is CPU/SoC specific and should be
> > > ideally defined in <soc>.dtsi. But still it's a way out for you to
> > > use
> > > cpufreq-cpu0 driver as it is.
> > >
> > > In any case, you can not just change voltage-tolerance to
> > > voltage-max with no care about the existing users.
> > >
> > > Shawn
> > >
> > I don't think so. The voltage/freq pairs are attribute of the CPU.
> > Any boards can choose regulator IC base the cost and other reasons.
> > If the opp table defined in <board>.dts, we can set exact
> voltage/freq
> > pairs, and not need use the voltage-tolerance to set tolerance.
>
> If you read my comment above, you should see that I agree OPP is
> CPU/SoC specific and should be defined in <soc>.dtsi. But property
> operating-points can reasonably be overwritten by particular
> <board>.dts for some reason like some voltages cannot be supplied on
> that board.
>
> Again, this is just a way for you to use generic cpufreq-cpu0 driver as
> it is, but not necessarily the best one.
>
> Shawn
>
I think my patch is better.
All soc have a max work voltage. If regulator IC can't supply min voltage,
It can supply max voltage to soc.
As my patch, not need overwrite OPP in <board>.dts.
As your comment above, almost all board need overwrite OPP, unless the regulator
IC can supply all voltage ranges of SoC need.
Thanks
-RongJun Ying
>
>
> To report this email as spam click
> https://www.mailcontrol.com/sr/MZbqvYs5QwJvpeaetUwhCQ==
> aM23S6+s5uWr7qEkawiSK+0AUqjCk0gm6KMeRLY+cWrx9g== .
Member of the CSR plc group of companies. CSR plc registered in England and Wales, registered number 4187346, registered office Churchill House, Cambridge Business Park, Cowley Road, Cambridge, CB4 0WZ, United Kingdom
More information can be found at www.csr.com. Follow CSR on Twitter at http://twitter.com/CSR_PLC and read our blog at www.csr.com/blog
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/