Re: [PATCH 3/9] ARM: at91/dt: add usb1 vbus and pullup pins

[Jean-Christophe PLAGNIOL-VILLARD]

On 13:04 Wed 28 Aug     , Boris BREZILLON wrote:
> Add vbus and pullup pinctrl definitions.
> Request the vbus and pullup pins in usb1 node.
> 
> Signed-off-by: Boris BREZILLON <b.brezillon@xxxxxxxxxxx>
> ---
>  arch/arm/boot/dts/at91rm9200ek.dts |   15 +++++++++++++++
>  1 file changed, 15 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/at91rm9200ek.dts b/arch/arm/boot/dts/at91rm9200ek.dts
> index 37b0880..76f3e87 100644
> --- a/arch/arm/boot/dts/at91rm9200ek.dts
> +++ b/arch/arm/boot/dts/at91rm9200ek.dts
> @@ -29,6 +29,18 @@
>  
>  	ahb {
>  		apb {
> +			pinctrl@fffff400 {
> +				usb1 {
> +					pinctrl_usb1_vbus: usb1_vbus-0 {
> +						atmel,pins = <AT91_PIOD 4 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
> +					};

it's a gpio no-need
> +
> +					pinctrl_usb1_pullup: usb1_pullup-0 {
> +						atmel,pins = <AT91_PIOD 5 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;
> +					};
no-need multidrive
> +				};
> +			};
> +
>  			dbgu: serial@fffff200 {
>  				status = "okay";
>  			};
> @@ -56,6 +68,9 @@
>  
>  			usb1: gadget@fffb0000 {
>  				atmel,vbus-gpio = <&pioD 4 GPIO_ACTIVE_HIGH>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&pinctrl_usb1_vbus
> +					     &pinctrl_usb1_pullup>;
>  				status = "okay";
>  			};
>  
> -- 
> 1.7.9.5
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/