Re: [PATCH] Allow MUSB DSPS to use "force host" mode

[Mark Jackson]

On 22/11/13 16:38, Michael Grzeschik wrote:
> Hallo,
> 
> On Fri, Nov 22, 2013 at 03:55:59PM +0000, Mark Jackson wrote:
>> The IDDIG input pin is normally used to determine the USB mode
>> (i.e. HOST or DEVICE).
>>
>> On some systems (e.g. AM335x) leaving this pin floating allows
>> the USB mode to be set via software.
>>
>> This patch adds support for this via the device tree.
>>
>> Signed-off-by: Mark Jackson <mpfj@xxxxxxxxxxxxx>
>> ---
>>  .../devicetree/bindings/usb/am33xx-usb.txt         |    2 ++
>>  drivers/usb/musb/musb_dsps.c                       |   14 ++++++++++++++
>>  include/linux/usb/musb.h                           |    1 +
>>  3 files changed, 17 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/usb/am33xx-usb.txt b/Documentation/devicetree/bindings/usb/am33xx-usb.txt
>> index 20c2ff2..560b7ff 100644
>> --- a/Documentation/devicetree/bindings/usb/am33xx-usb.txt
>> +++ b/Documentation/devicetree/bindings/usb/am33xx-usb.txt
>> @@ -47,6 +47,8 @@ USB
>>  - dmas: specifies the dma channels
>>  - dma-names: specifies the names of the channels. Use "rxN" for receive
>>    and "txN" for transmit endpoints. N specifies the endpoint number.
>> +- ti,force-host: specifies that the IDDIG input be ignored and the device be
>> +  put into host mode regardless.
> 
> You should always CC devicetree-discuss if adding new bindings. Why
> another binding anyway? We have the common binding dr_mode already.
> Please use this and of_usb_get_dr_mode from drivers/usb/usb-common.c
> instead.

Sure ... that's a nicer solution.

I'll do that for v2

Mark J.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/