Re: [PATCH] PM / Clocks: fix pm_clk_resume/suspend if CONFIG_PM_RUNTIME is set

[Kevin Hilman]

Santosh Shilimkar <santosh.shilimkar@xxxxxx> writes:

[...]

>>> It looks like even if you just remove the locks here, the PM core is
>>> free to call this function with irqs disabled if pm_runtime_irq_safe()
>>> has been called on the device. Perhaps runtime PM can only do the
>>> clk_enable()/clk_disable() part and the clk_unprepare()/clk_prepare()
>>> calls should happen in the system suspend callbacks?
>> 
>> Even don't know what to say :( On Keystone clk_unprepare()/clk_prepare() are NOPs.
>> But clk_prepare() has to be called at least once before clk_enable() :((
>> So, solution with suspend/resume will not fix current problem :( unfortunately.
>> 
>> FYI, Now pm_clk_suspend/pm_clk_resume are called from arch/arm/mach-keystone/pm_domain.c
>> (also similar solution is used by Davinci, but issue has not been detected because
>> PM runtime hasn't been used by Davinci IP drivers before)
>> 
> One way to deal with this is to have clk_unprepare()/clk_prepare()
> called from dev_pm_domain ops before calling pm_clk_[suspend/resume]() if we
> can't have that as part of runtime code.

That doesn't solve the irq_safe problem that Stephen pointed out without
being very careful.  Basically, if you have _any_ potentially sleeping
calls in this path, you can never allow devices to use
pm_runtime_irq_safe().

Also, I don't like having the clk_enable in the PM core but the
clk_prepare in the platform-specific pm_domain.  That seems prone for
platforms to get wrong.

I'll need to think about this a little more before having any idea what
to do here.

Kevin






--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/