Re: [PATCH] watchdog: s3c2410_wdt: Report when the watchdog reset the system
From: Olof Johansson
Date: Mon Dec 02 2013 - 15:48:30 EST
On Mon, Dec 2, 2013 at 12:21 PM, Guenter Roeck <linux@xxxxxxxxxxxx> wrote:
> On Mon, Dec 02, 2013 at 10:14:41AM -0800, Doug Anderson wrote:
>> A good watchdog driver is supposed to report when it was responsible
>> for resetting the system. Implement this for the s3c2410, at least on
>> exynos5250 and exynos5420 where we already have a pointer to the PMU
>> registers to read the information.
>>
>> Signed-off-by: Doug Anderson <dianders@xxxxxxxxxxxx>
>> ---
>> This patch is based atop Leela Krishna's recent series that ends with
>> (ARM: dts: update watchdog device nodes for Exynos5250 and Exynos5420)
>> AKA <https://patchwork.kernel.org/patch/3251861/>.
>>
>> drivers/watchdog/s3c2410_wdt.c | 42 +++++++++++++++++++++++++++++++++++++++---
>> 1 file changed, 39 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c
>> index 47f4dcf..2c87d37 100644
>> --- a/drivers/watchdog/s3c2410_wdt.c
>> +++ b/drivers/watchdog/s3c2410_wdt.c
>> @@ -62,9 +62,13 @@
>> #define CONFIG_S3C2410_WATCHDOG_ATBOOT (0)
>> #define CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME (15)
>>
>> +#define RST_STAT_REG_OFFSET 0x0404
>> #define WDT_DISABLE_REG_OFFSET 0x0408
>> #define WDT_MASK_RESET_REG_OFFSET 0x040c
>> #define QUIRK_NEEDS_PMU_CONFIG (1 << 0)
>> +#define QUIRK_HAS_RST_STAT (1 << 1)
>> +#define QUIRKS_NEED_PMUREG (QUIRK_NEEDS_PMU_CONFIG | \
>> + QUIRK_HAS_RST_STAT)
>>
> I am not really happy about the NEED (both of them, really) here.
> How about HAS instead ?
Ah, I just commented on these things on our internal review site too
on this patch. I don't even think a quirk is needed -- just use the
presence of a non-0 rst_stat_reg to tell if you need to use regmap.
-Olof
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/