Re: [PATCH v4 6/9] phy: Add support for S5PV210 to the Exynos USBPHY driver
From: Kishon Vijay Abraham I
Date: Fri Dec 06 2013 - 06:15:00 EST
Hi,
On Friday 06 December 2013 04:01 PM, Kamil Debski wrote:
> From: Mateusz Krawczuk <mat.krawczuk@xxxxxxxxx>
>
> Add support for the Samsung's S5PV210 SoC to the Exynos USB PHY driver.
>
> Signed-off-by: Mateusz Krawczuk <m.krawczuk@xxxxxxxxxxxxxxxxxxx>
> [k.debski@xxxxxxxxxxx: cleanup and commit description]
> [k.debski@xxxxxxxxxxx: make changes accordingly to the mailing list
> comments]
> Signed-off-by: Kamil Debski <k.debski@xxxxxxxxxxx>
> Signed-off-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
> ---
> .../devicetree/bindings/phy/samsung-usbphy.txt | 1 +
> drivers/phy/Kconfig | 7 +
> drivers/phy/Makefile | 1 +
> drivers/phy/phy-s5pv210-usb2.c | 206 ++++++++++++++++++++
> drivers/phy/phy-samsung-usb2.c | 6 +
> drivers/phy/phy-samsung-usb2.h | 1 +
> 6 files changed, 222 insertions(+)
> create mode 100644 drivers/phy/phy-s5pv210-usb2.c
>
> diff --git a/Documentation/devicetree/bindings/phy/samsung-usbphy.txt b/Documentation/devicetree/bindings/phy/samsung-usbphy.txt
> index cadbf70..77a8e9c 100644
> --- a/Documentation/devicetree/bindings/phy/samsung-usbphy.txt
> +++ b/Documentation/devicetree/bindings/phy/samsung-usbphy.txt
> @@ -3,6 +3,7 @@ Samsung S5P/EXYNOS SoC series USB PHY
>
> Required properties:
> - compatible : should be one of the listed compatibles:
> + - "samsung,s5pv210-usb2-phy"
> - "samsung,exynos4210-usb2-phy"
> - "samsung,exynos4212-usb2-phy"
> - reg : a list of registers used by phy driver
> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
> index b29018f..2e433cd 100644
> --- a/drivers/phy/Kconfig
> +++ b/drivers/phy/Kconfig
> @@ -58,6 +58,13 @@ config PHY_SAMSUNG_USB2
> This driver provides common interface to interact, for Samsung
> USB 2.0 PHY driver.
>
> +config PHY_S5PV210_USB2
> + bool "Support for S5PV210"
> + depends on PHY_SAMSUNG_USB2
> + depends on ARCH_S5PV210
> + help
> + Enable USB PHY support for S5PV210
more description here..
> +
> config PHY_EXYNOS4210_USB2
> bool "Support for Exynos 4210"
> depends on PHY_SAMSUNG_USB2
> diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
> index 9f4befd..fefc6c2 100644
> --- a/drivers/phy/Makefile
> +++ b/drivers/phy/Makefile
> @@ -8,5 +8,6 @@ obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO) += phy-exynos-mipi-video.o
> obj-$(CONFIG_OMAP_USB2) += phy-omap-usb2.o
> obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o
> obj-$(CONFIG_PHY_SAMSUNG_USB2) += phy-samsung-usb2.o
> +obj-$(CONFIG_PHY_S5PV210_USB2) += phy-s5pv210-usb2.o
> obj-$(CONFIG_PHY_EXYNOS4210_USB2) += phy-exynos4210-usb2.o
> obj-$(CONFIG_PHY_EXYNOS4212_USB2) += phy-exynos4212-usb2.o
> diff --git a/drivers/phy/phy-s5pv210-usb2.c b/drivers/phy/phy-s5pv210-usb2.c
> new file mode 100644
> index 0000000..528a114
> --- /dev/null
> +++ b/drivers/phy/phy-s5pv210-usb2.c
> @@ -0,0 +1,206 @@
> +/*
> + * Samsung SoC USB 1.1/2.0 PHY driver - S5PV210 support
> + *
> + * Copyright (C) 2013 Samsung Electronics Co., Ltd.
> + * Authors: Kamil Debski <k.debski@xxxxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/phy/phy.h>
> +#include <linux/platform_device.h>
> +#include <linux/spinlock.h>
I think my comments for the previous patch with a similar driver
(phy-exynos4210-usb2.c) is applicable here also.
Thanks
Kishon
> +#include "phy-samsung-usb2.h"
> +
> +/* Exynos USB PHY registers */
> +
> +/* PHY power control */
> +#define S5PV210_UPHYPWR 0x0
> +
> +#define S5PV210_UPHYPWR_PHY0_SUSPEND (1 << 0)
> +#define S5PV210_UPHYPWR_PHY0_PWR (1 << 3)
> +#define S5PV210_UPHYPWR_PHY0_OTG_PWR (1 << 4)
> +#define S5PV210_UPHYPWR_PHY0 ( \
> + S5PV210_UPHYPWR_PHY0_SUSPEND | \
> + S5PV210_UPHYPWR_PHY0_PWR | \
> + S5PV210_UPHYPWR_PHY0_OTG_PWR)
> +
> +#define S5PV210_UPHYPWR_PHY1_SUSPEND (1 << 6)
> +#define S5PV210_UPHYPWR_PHY1_PWR (1 << 7)
> +#define S5PV210_UPHYPWR_PHY1 ( \
> + S5PV210_UPHYPWR_PHY1_SUSPEND | \
> + S5PV210_UPHYPWR_PHY1_PWR)
> +
> +/* PHY clock control */
> +#define S5PV210_UPHYCLK 0x4
> +
> +#define S5PV210_UPHYCLK_PHYFSEL_MASK (0x3 << 0)
> +#define S5PV210_UPHYCLK_PHYFSEL_48MHZ (0x0 << 0)
> +#define S5PV210_UPHYCLK_PHYFSEL_24MHZ (0x3 << 0)
> +#define S5PV210_UPHYCLK_PHYFSEL_12MHZ (0x2 << 0)
> +
> +#define S5PV210_UPHYCLK_PHY0_ID_PULLUP (0x1 << 2)
> +#define S5PV210_UPHYCLK_PHY0_COMMON_ON (0x1 << 4)
> +#define S5PV210_UPHYCLK_PHY1_COMMON_ON (0x1 << 7)
> +
> +/* PHY reset control */
> +#define S5PV210_UPHYRST 0x8
> +
> +#define S5PV210_URSTCON_PHY0 (1 << 0)
> +#define S5PV210_URSTCON_OTG_HLINK (1 << 1)
> +#define S5PV210_URSTCON_OTG_PHYLINK (1 << 2)
> +#define S5PV210_URSTCON_PHY1_ALL (1 << 3)
> +#define S5PV210_URSTCON_HOST_LINK_ALL (1 << 4)
> +
> +/* Isolation, configured in the power management unit */
> +#define S5PV210_USB_ISOL_DEVICE_OFFSET 0x704
> +#define S5PV210_USB_ISOL_DEVICE (1 << 0)
> +#define S5PV210_USB_ISOL_HOST_OFFSET 0x708
> +#define S5PV210_USB_ISOL_HOST (1 << 1)
> +
> +
> +enum s5pv210_phy_id {
> + S5PV210_DEVICE,
> + S5PV210_HOST,
> + S5PV210_NUM_PHYS,
> +};
> +
> +/*
> + * s5pv210_rate_to_clk() converts the supplied clock rate to the value that
> + * can be written to the phy register.
> + */
> +static int s5pv210_rate_to_clk(unsigned long rate, u32 *reg)
> +{
> + pr_info("%lu\n", rate);
> + switch (rate) {
> + case 12 * MHZ:
> + *reg = S5PV210_UPHYCLK_PHYFSEL_12MHZ;
> + break;
> + case 24 * MHZ:
> + *reg = S5PV210_UPHYCLK_PHYFSEL_24MHZ;
> + break;
> + case 48 * MHZ:
> + *reg = S5PV210_UPHYCLK_PHYFSEL_48MHZ;
> + break;
> + default:
> + return -EINVAL;
> + }
> +}
> +
> +static void s5pv210_isol(struct samsung_usb2_phy_instance *inst, bool on)
> +{
> + struct samsung_usb2_phy_driver *drv = inst->drv;
> + u32 mask;
> + u32 tmp;
> +
> + if (!drv->reg_isol)
> + return;
> +
> + switch (inst->cfg->id) {
> + case S5PV210_DEVICE:
> + mask = S5PV210_USB_ISOL_DEVICE;
> + break;
> + case S5PV210_HOST:
> + mask = S5PV210_USB_ISOL_HOST;
> + break;
> + default:
> + return;
> + };
> +
> + regmap_update_bits(drv->reg_pmu, offset, mask, on ? 0 : mask);
> +}
> +
> +static void s5pv210_phy_pwr(struct samsung_usb2_phy_instance *inst, bool on)
> +{
> + struct samsung_usb2_phy_driver *drv = inst->drv;
> + u32 rstbits = 0;
> + u32 phypwr = 0;
> + u32 rst;
> + u32 pwr;
> +
> + switch (inst->cfg->id) {
> + case S5PV210_DEVICE:
> + phypwr = S5PV210_UPHYPWR_PHY0;
> + rstbits = S5PV210_URSTCON_PHY0;
> + break;
> + case S5PV210_HOST:
> + phypwr = S5PV210_UPHYPWR_PHY1;
> + rstbits = S5PV210_URSTCON_PHY1_ALL |
> + S5PV210_URSTCON_HOST_LINK_ALL;
> + break;
> + };
> +
> + if (on) {
> + writel(inst->clk, drv->reg_phy + S5PV210_UPHYCLK);
> +
> + pwr = readl(drv->reg_phy + S5PV210_UPHYPWR);
> + pwr &= ~phypwr;
> + writel(pwr, drv->reg_phy + S5PV210_UPHYPWR);
> +
> + rst = readl(drv->reg_phy + S5PV210_UPHYRST);
> + rst |= rstbits;
> + writel(rst, drv->reg_phy + S5PV210_UPHYRST);
> + udelay(10);
> + rst &= ~rstbits;
> + writel(rst, drv->reg_phy + S5PV210_UPHYRST);
> + } else {
> + pwr = readl(drv->reg_phy + S5PV210_UPHYPWR);
> + pwr |= phypwr;
> + writel(pwr, drv->reg_phy + S5PV210_UPHYPWR);
> + }
> +}
> +
> +static int s5pv210_power_on(struct samsung_usb2_phy_instance *inst)
> +{
> + struct samsung_usb2_phy_driver *drv = inst->drv;
> +
> + s5pv210_isol(inst, 0);
> + s5pv210_phy_pwr(inst, 1);
> +
> + return 0;
> +}
> +
> +static int s5pv210_power_off(struct samsung_usb2_phy_instance *inst)
> +{
> + struct samsung_usb2_phy_driver *drv = inst->drv;
> +
> + s5pv210_phy_pwr(inst, 0);
> + s5pv210_isol(inst, 1);
> +
> + return 0;
> +}
> +
> +
> +static const struct samsung_usb2_common_phy s5pv210_phys[] = {
> + {
> + .label = "device",
> + .id = S5PV210_DEVICE,
> + .rate_to_clk = s5pv210_rate_to_clk,
> + .power_on = s5pv210_power_on,
> + .power_off = s5pv210_power_off,
> + },
> + {
> + .label = "host",
> + .id = S5PV210_HOST,
> + .rate_to_clk = s5pv210_rate_to_clk,
> + .power_on = s5pv210_power_on,
> + .power_off = s5pv210_power_off,
> + },
> + {},
> +};
> +
> +const struct samsung_usb2_phy_config s5pv210_usb2_phy_config = {
> + .cpu = TYPE_S5PV210,
> + .num_phys = S5PV210_NUM_PHYS,
> + .phys = s5pv210_phys,
> +};
> +
> diff --git a/drivers/phy/phy-samsung-usb2.c b/drivers/phy/phy-samsung-usb2.c
> index 804ec77..ef93fd3 100644
> --- a/drivers/phy/phy-samsung-usb2.c
> +++ b/drivers/phy/phy-samsung-usb2.c
> @@ -98,6 +98,12 @@ static struct phy *samsung_usb2_phy_xlate(struct device *dev,
> }
>
> static const struct of_device_id samsung_usb2_phy_of_match[] = {
> +#ifdef CONFIG_PHY_S5PV210_USB2
> + {
> + .compatible = "samsung,s5pv210-usb2-phy",
> + .data = &s5pv210_usb2_phy_config,
> + },
> +#endif
> #ifdef CONFIG_PHY_EXYNOS4210_USB2
> {
> .compatible = "samsung,exynos4210-usb2-phy",
> diff --git a/drivers/phy/phy-samsung-usb2.h b/drivers/phy/phy-samsung-usb2.h
> index cd12477..0f51dbb 100644
> --- a/drivers/phy/phy-samsung-usb2.h
> +++ b/drivers/phy/phy-samsung-usb2.h
> @@ -66,6 +66,7 @@ struct samsung_usb2_phy_config {
> char has_mode_switch;
> };
>
> +extern const struct samsung_usb2_phy_config s5pv210_usb2_phy_config;
> extern const struct samsung_usb2_phy_config exynos4210_usb2_phy_config;
> extern const struct samsung_usb2_phy_config exynos4212_usb2_phy_config;
> #endif
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/