[PATCH 01/10] net: stmmac: Enable stmmac main clock when probing hardware
From: Chen-Yu Tsai
Date: Fri Dec 06 2013 - 13:07:02 EST
Signed-off-by: Chen-Yu Tsai <wens@xxxxxxxx>
---
Guiseppe previously stated that the "stmmaceth" clock is the
main clock that drives the IP. The stmmac driver does not
enable this clock during the probe phase. When the driver is
built in to the kernel, this is fine because the clock maybe
on by default, or the boot loader had enabled it.
If stmmac is built as a module, when the module is loaded,
the clock may be found unused and disabled by the kernel.
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 24 +++++++++++++----------
1 file changed, 14 insertions(+), 10 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 8d4ccd3..7da71ed 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -2688,10 +2688,17 @@ struct stmmac_priv *stmmac_dvr_probe(struct device *device,
if ((phyaddr >= 0) && (phyaddr <= 31))
priv->plat->phy_addr = phyaddr;
+ priv->stmmac_clk = clk_get(priv->device, STMMAC_RESOURCE_NAME);
+ if (IS_ERR(priv->stmmac_clk)) {
+ pr_warn("%s: warning: cannot get CSR clock\n", __func__);
+ goto error_clk_get;
+ }
+ clk_prepare_enable(priv->stmmac_clk);
+
/* Init MAC and get the capabilities */
ret = stmmac_hw_init(priv);
if (ret)
- goto error_free_netdev;
+ goto error_hw_init;
ndev->netdev_ops = &stmmac_netdev_ops;
@@ -2729,12 +2736,6 @@ struct stmmac_priv *stmmac_dvr_probe(struct device *device,
goto error_netdev_register;
}
- priv->stmmac_clk = clk_get(priv->device, STMMAC_RESOURCE_NAME);
- if (IS_ERR(priv->stmmac_clk)) {
- pr_warn("%s: warning: cannot get CSR clock\n", __func__);
- goto error_clk_get;
- }
-
/* If a specific clk_csr value is passed from the platform
* this means that the CSR Clock Range selection cannot be
* changed at run-time and it is fixed. Viceversa the driver'll try to
@@ -2759,15 +2760,18 @@ struct stmmac_priv *stmmac_dvr_probe(struct device *device,
}
}
+ clk_disable_unprepare(priv->stmmac_clk);
+
return priv;
error_mdio_register:
- clk_put(priv->stmmac_clk);
-error_clk_get:
unregister_netdev(ndev);
error_netdev_register:
netif_napi_del(&priv->napi);
-error_free_netdev:
+error_hw_init:
+ clk_disable_unprepare(priv->stmmac_clk);
+ clk_put(priv->stmmac_clk);
+error_clk_get:
free_netdev(ndev);
return NULL;
--
1.8.5.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/