[PATCH 10/10] Staging: bcm: DDRInit: tidy up comments.

From: Gary Rookard
Date: Sat Dec 07 2013 - 02:40:46 EST

Next message: Gary Rookard: "[PATCH 03/10] Staging: bcm: DDRInit: added space after commas."
Previous message: Guenter Roeck: "Re: [PATCH 3.4 00/32] 3.4.73-stable review"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

This is the tenth patch of a series.

Signed-off-by:Gary Alan Rookard <garyrookard@xxxxxxxxx>
---
On branch staging-next
drivers/staging/bcm/DDRInit.c | 231 +++++++++++++++++++++---------------------
1 file changed, 116 insertions(+), 115 deletions(-)

diff --git a/drivers/staging/bcm/DDRInit.c b/drivers/staging/bcm/DDRInit.c
index 1b73819..96afa15 100644
--- a/drivers/staging/bcm/DDRInit.c
+++ b/drivers/staging/bcm/DDRInit.c
@@ -7,37 +7,37 @@

/* DDR INIT-133Mhz */
#define T3_SKIP_CLOCK_PROGRAM_DUMP_133MHZ 12 /* index for 0x0F007000 */
-static struct bcm_ddr_setting asT3_DDRSetting133MHz[] = { /* # DPLL Clock Setting */
+static struct bcm_ddr_setting asT3_DDRSetting133MHz[] = { /* # DPLL Clock Setting */
{0x0F000800, 0x00007212},
{0x0f000820, 0x07F13FFF},
{0x0f000810, 0x00000F95},
{0x0f000860, 0x00000000},
{0x0f000880, 0x000003DD},
- {0x0f000840, 0x0FFF1B00}, /* Changed source for X-bar and MIPS clock to APLL */
+ {0x0f000840, 0x0FFF1B00}, /* Changed source for X-bar and MIPS clock to APLL */
{0x0f000870, 0x00000002},
{0x0F00a044, 0x1fffffff},
{0x0F00a040, 0x1f000000},
{0x0F00a084, 0x1Cffffff},
{0x0F00a080, 0x1C000000},
{0x0F00a04C, 0x0000000C},
- {0x0F007000, 0x00010001}, /* Memcontroller Default values */
+ {0x0F007000, 0x00010001}, /* Memcontroller Default values */
{0x0F007004, 0x01010100},
{0x0F007008, 0x01000001},
{0x0F00700c, 0x00000000},
{0x0F007010, 0x01000000},
{0x0F007014, 0x01000100},
{0x0F007018, 0x01000000},
- {0x0F00701c, 0x01020001},/* POP - 0x00020001 Normal 0x01020001 */
- {0x0F007020, 0x04030107}, /* Normal - 0x04030107 POP - 0x05030107 */
+ {0x0F00701c, 0x01020001}, /* POP - 0x00020001 Normal 0x01020001 */
+ {0x0F007020, 0x04030107}, /* Normal - 0x04030107 POP - 0x05030107 */
{0x0F007024, 0x02000007},
{0x0F007028, 0x02020202},
- {0x0F00702c, 0x0206060a},/* ROB- 0x0205050a,0x0206060a */
+ {0x0F00702c, 0x0206060a}, /* ROB- 0x0205050a,0x0206060a */
{0x0F007030, 0x05000000},
{0x0F007034, 0x00000003};
- {0x0F007038, 0x110a0200},/* ROB - 0x110a0200,0x180a0200,0x1f0a0200 */
- {0x0F00703C, 0x02101010},/* ROB - 0x02101010,0x02101018}, */
- {0x0F007040, 0x45751200},/* ROB - 0x45751200,0x450f1200}, */
- {0x0F007044, 0x110a0d00},/*ROB - 0x110a0d00.0x111f0d00 */
+ {0x0F007038, 0x110a0200}, /* ROB - 0x110a0200,0x180a0200,0x1f0a0200 */
+ {0x0F00703C, 0x02101010}, /* ROB - 0x02101010,0x02101018}, */
+ {0x0F007040, 0x45751200}, /* ROB - 0x45751200,0x450f1200}, */
+ {0x0F007044, 0x110a0d00}, /*ROB - 0x110a0d00.0x111f0d00 */
{0x0F007048, 0x081b0306},
{0x0F00704c, 0x00000000},
{0x0F007050, 0x0000001c},
@@ -54,13 +54,13 @@ static struct bcm_ddr_setting asT3_DDRSetting133MHz[] = { /* # DPLL Clock Se
{0x0F00707C, 0x00000000},
{0x0F007080, 0x00000000},
{0x0F007084, 0x00000000},
- {0x0F007094, 0x00000104}, /* # Enable BW improvement within memory controller */
- {0x0F00A000, 0x00000016}, /* # Enable 2 ports within X-bar */
- {0x0F007018, 0x01010000} /* # Enable start bit within memory controller */
+ {0x0F007094, 0x00000104}, /* # Enable BW improvement within memory controller */
+ {0x0F00A000, 0x00000016}, /* # Enable 2 ports within X-bar */
+ {0x0F007018, 0x01010000} /* # Enable start bit within memory controller */
};
/* 80Mhz */
#define T3_SKIP_CLOCK_PROGRAM_DUMP_80MHZ 10 /* index for 0x0F007000 */
-static struct bcm_ddr_setting asT3_DDRSetting80MHz[] = { /* # DPLL Clock Setting */
+static struct bcm_ddr_setting asT3_DDRSetting80MHz[] = { /* # DPLL Clock Setting */
{0x0f000810, 0x00000F95},
{0x0f000820, 0x07f1ffff},
{0x0f000860, 0x00000000},
@@ -106,18 +106,18 @@ static struct bcm_ddr_setting asT3_DDRSetting80MHz[] = { /* # DPLL Clock Settin
{0x0F007080, 0x00000000},
{0x0F007084, 0x00000000},
{0x0F007094, 0x00000104},
- {0x0F007018, 0x01010000} /* # Enable start bit within memory controller */
+ {0x0F007018, 0x01010000} /* # Enable start bit within memory controller */
};
/* 100Mhz */
#define T3_SKIP_CLOCK_PROGRAM_DUMP_100MHZ 13 /* index for 0x0F007000 */
-static struct bcm_ddr_setting asT3_DDRSetting100MHz[] = {/* # DPLL Clock Setting */
+static struct bcm_ddr_setting asT3_DDRSetting100MHz[] = { /* # DPLL Clock Setting */
{0x0F000800, 0x00007008},
{0x0f000810, 0x00000F95},
{0x0f000820, 0x07F13E3F},
{0x0f000860, 0x00000000},
{0x0f000880, 0x000003DD},
- {0x0f000840, 0x0FFF1B00}, /* Changed source for X-bar and MIPS clock to APLL */
- /* 0x0f000840,0x0FFF1800, */
+ {0x0f000840, 0x0FFF1B00}, /* Changed source for X-bar and MIPS clock to APLL */
+ /* 0x0f000840,0x0FFF1800, */
{0x0f000870, 0x00000002},
{0x0F00a044, 0x1fffffff},
{0x0F00a040, 0x1f000000},
@@ -132,8 +132,8 @@ static struct bcm_ddr_setting asT3_DDRSetting100MHz[] = {/* # DPLL Clock Settin
{0x0F007010, 0x01000000},
{0x0F007014, 0x01000100},
{0x0F007018, 0x01000000},
- {0x0F00701c, 0x01020001}, /* POP - 0x00020000 Normal 0x01020000 */
- {0x0F007020, 0x04020107},/* Normal - 0x04030107 POP - 0x05030107 */
+ {0x0F00701c, 0x01020001}, /* POP - 0x00020000 Normal 0x01020000 */
+ {0x0F007020, 0x04020107}, /* Normal - 0x04030107 POP - 0x05030107 */
{0x0F007024, 0x00000007},
{0x0F007028, 0x01020201},
{0x0F00702c, 0x0204040A},
@@ -143,7 +143,7 @@ static struct bcm_ddr_setting asT3_DDRSetting100MHz[] = {/* # DPLL Clock Settin
{0x0F00703C, 0x02030320},
{0x0F007040, 0x6E7F1200},
{0x0F007044, 0x01190A00},
- {0x0F007048, 0x06120305},/* 0x02690204 0x06120305 */
+ {0x0F007048, 0x06120305}, /* 0x02690204 0x06120305 */
{0x0F00704c, 0x00000000},
{0x0F007050, 0x0000001C},
{0x0F007054, 0x00000000},
@@ -160,7 +160,7 @@ static struct bcm_ddr_setting asT3_DDRSetting100MHz[] = {/* # DPLL Clock Settin
{0x0F007080, 0x00000000},
{0x0F007084, 0x00000000},
{0x0F007094, 0x00000104}, /* # Enable BW improvement within memory controller */
- {0x0F007018, 0x01010000} /* # Enable start bit within memory controller */
+ {0x0F007018, 0x01010000} /* # Enable start bit within memory controller */
};
/* Net T3B DDR Settings */
/* DDR INIT-133Mhz */
@@ -175,37 +175,37 @@ static struct bcm_ddr_setting asDPLL_266MHZ[] = {
};

#define T3B_SKIP_CLOCK_PROGRAM_DUMP_133MHZ 11 /* index for 0x0F007000 */
-static struct bcm_ddr_setting asT3B_DDRSetting133MHz[] = {/* # DPLL Clock Setting */
+static struct bcm_ddr_setting asT3B_DDRSetting133MHz[] = { /* # DPLL Clock Setting */
{0x0f000810, 0x00000F95},
{0x0f000810, 0x00000F95},
{0x0f000810, 0x00000F95},
{0x0f000820, 0x07F13652},
{0x0f000840, 0x0FFF0800},
- {0x0f000880, 0x000003DD}, /* Changed source for X-bar and MIPS clock to APLL */
+ {0x0f000880, 0x000003DD}, /* Changed source for X-bar and MIPS clock to APLL */
{0x0f000860, 0x00000000},
- {0x0F00a044, 0x1fffffff}, /* Changed source for X-bar and MIPS clock to APLL */
+ {0x0F00a044, 0x1fffffff}, /* Changed source for X-bar and MIPS clock to APLL */
{0x0F00a040, 0x1f000000},
{0x0F00a084, 0x1Cffffff},
{0x0F00a080, 0x1C000000},
- {0x0F00A000, 0x00000016}, /* # Enable 2 ports within X-bar */
- {0x0F007000, 0x00010001}, /* Memcontroller Default values */
+ {0x0F00A000, 0x00000016}, /* # Enable 2 ports within X-bar */
+ {0x0F007000, 0x00010001}, /* Memcontroller Default values */
{0x0F007004, 0x01010100},
{0x0F007008, 0x01000001},
{0x0F00700c, 0x00000000},
{0x0F007010, 0x01000000},
{0x0F007014, 0x01000100},
{0x0F007018, 0x01000000},
- {0x0F00701c, 0x01020001},/* POP - 0x00020001 Normal 0x01020001 */
- {0x0F007020, 0x04030107}, /* Normal - 0x04030107 POP - 0x05030107 */
+ {0x0F00701c, 0x01020001}, /* POP - 0x00020001 Normal 0x01020001 */
+ {0x0F007020, 0x04030107}, /* Normal - 0x04030107 POP - 0x05030107 */
{0x0F007024, 0x02000007},
{0x0F007028, 0x02020202},
- {0x0F00702c, 0x0206060a},/* ROB- 0x0205050a,0x0206060a */
+ {0x0F00702c, 0x0206060a}, /* ROB- 0x0205050a,0x0206060a */
{0x0F007030, 0x05000000},
{0x0F007034, 0x00000003},
- {0x0F007038, 0x130a0200},/* ROB - 0x110a0200,0x180a0200,0x1f0a0200 */
- {0x0F00703C, 0x02101012},/* ROB - 0x02101010,0x02101018}, */
- {0x0F007040, 0x457D1200},/* ROB - 0x45751200,0x450f1200}, */
- {0x0F007044, 0x11130d00},/* ROB - 0x110a0d00 0x111f0d00 */
+ {0x0F007038, 0x130a0200}, /* ROB - 0x110a0200,0x180a0200,0x1f0a0200 */
+ {0x0F00703C, 0x02101012}, /* ROB - 0x02101010,0x02101018}, */
+ {0x0F007040, 0x457D1200}, /* ROB - 0x45751200,0x450f1200}, */
+ {0x0F007044, 0x11130d00}, /* ROB - 0x110a0d00 0x111f0d00 */
{0x0F007048, 0x040D0306},
{0x0F00704c, 0x00000000},
{0x0F007050, 0x0000001c},
@@ -222,12 +222,12 @@ static struct bcm_ddr_setting asT3B_DDRSetting133MHz[] = {/* # DPLL Clock Settin
{0x0F00707C, 0x00000000},
{0x0F007080, 0x00000000},
{0x0F007084, 0x00000000},
- {0x0F007094, 0x00000104}, /* # Enable BW improvement within memory controller */
- {0x0F007018, 0x01010000}, /* # Enable start bit within memory controller */
+ {0x0F007094, 0x00000104}, /* # Enable BW improvement within memory controller */
+ {0x0F007018, 0x01010000}, /* # Enable start bit within memory controller */
};

#define T3B_SKIP_CLOCK_PROGRAM_DUMP_80MHZ 9 /*index for 0x0F007000 */
-static struct bcm_ddr_setting asT3B_DDRSetting80MHz[] = {/* # DPLL Clock Setting */
+static struct bcm_ddr_setting asT3B_DDRSetting80MHz[] = { /* # DPLL Clock Setting */
{0x0f000810, 0x00000F95},
{0x0f000820, 0x07F13FFF},
{0x0f000840, 0x0FFF1F00},
@@ -238,7 +238,7 @@ static struct bcm_ddr_setting asT3B_DDRSetting80MHz[] = {/* # DPLL Clock Setting
{0x0F00a084, 0x1Cffffff},
{0x0F00a080, 0x1C000000},
{0x0F00a000, 0x00000016},
- {0x0F007000, 0x00010001}, /* Memcontroller Default values */
+ {0x0F007000, 0x00010001}, /* Memcontroller Default values */
{0x0F007004, 0x01000000},
{0x0F007008, 0x01000001},
{0x0F00700c, 0x00000000},
@@ -273,11 +273,11 @@ static struct bcm_ddr_setting asT3B_DDRSetting80MHz[] = {/* # DPLL Clock Setting
{0x0F007080, 0x00000000},
{0x0F007084, 0x00000000},
{0x0F007094, 0x00000104},
- {0x0F007018, 0x01010000} /* # Enable start bit within memory controller */
+ {0x0F007018, 0x01010000} /* # Enable start bit within memory controller */
};
/* 100Mhz */
#define T3B_SKIP_CLOCK_PROGRAM_DUMP_100MHZ 9 /* index for 0x0F007000 */
-static struct bcm_ddr_setting asT3B_DDRSetting100MHz[] = {/* # DPLL Clock Setting */
+static struct bcm_ddr_setting asT3B_DDRSetting100MHz[] = { /* # DPLL Clock Setting */
{0x0f000810, 0x00000F95},
{0x0f000820, 0x07F1369B},
{0x0f000840, 0x0FFF0800},
@@ -287,16 +287,16 @@ static struct bcm_ddr_setting asT3B_DDRSetting100MHz[] = {/* # DPLL Clock Settin
{0x0F00a040, 0x1f000000},
{0x0F00a084, 0x1Cffffff},
{0x0F00a080, 0x1C000000},
- {0x0F00A000, 0x00000016}, /*# Enable 2 ports within X-bar */
- {0x0F007000, 0x00010001}, /* Memcontroller Default values */
+ {0x0F00A000, 0x00000016}, /*# Enable 2 ports within X-bar */
+ {0x0F007000, 0x00010001}, /* Memcontroller Default values */
{0x0F007004, 0x01010100},
{0x0F007008, 0x01000001},
{0x0F00700c, 0x00000000},
{0x0F007010, 0x01000000},
{0x0F007014, 0x01000100},
{0x0F007018, 0x01000000},
- {0x0F00701c, 0x01020000}, /* POP - 0x00020000 Normal 0x01020000 */
- {0x0F007020, 0x04020107},/* Normal - 0x04030107 POP - 0x05030107 */
+ {0x0F00701c, 0x01020000}, /* POP - 0x00020000 Normal 0x01020000 */
+ {0x0F007020, 0x04020107}, /* Normal - 0x04030107 POP - 0x05030107 */
{0x0F007024, 0x00000007},
{0x0F007028, 0x01020201},
{0x0F00702c, 0x0204040A},
@@ -306,7 +306,7 @@ static struct bcm_ddr_setting asT3B_DDRSetting100MHz[] = {/* # DPLL Clock Settin
{0x0F00703C, 0x02030320},
{0x0F007040, 0x6E7F1200},
{0x0F007044, 0x01190A00},
- {0x0F007048, 0x06120305},/*0x02690204 0x06120305 */
+ {0x0F007048, 0x06120305}, /*0x02690204 0x06120305 */
{0x0F00704c, 0x00000000},
{0x0F007050, 0x0100001C},
{0x0F007054, 0x00000000},
@@ -322,39 +322,39 @@ static struct bcm_ddr_setting asT3B_DDRSetting100MHz[] = {/* # DPLL Clock Settin
{0x0F00707C, 0x00000000},
{0x0F007080, 0x00000000},
{0x0F007084, 0x00000000},
- {0x0F007094, 0x00000104}, /* # Enable BW improvement within memory controller */
- {0x0F007018, 0x01010000} /* # Enable start bit within memory controller */
+ {0x0F007094, 0x00000104}, /* # Enable BW improvement within memory controller */
+ {0x0F007018, 0x01010000} /* # Enable start bit within memory controller */
};
#define T3LP_SKIP_CLOCK_PROGRAM_DUMP_133MHZ 9 /*index for 0x0F007000 */
-static struct bcm_ddr_setting asT3LP_DDRSetting133MHz[] = {/* # DPLL Clock Setting */
+static struct bcm_ddr_setting asT3LP_DDRSetting133MHz[] = { /* # DPLL Clock Setting */
{0x0f000820, 0x03F1365B},
{0x0f000810, 0x00002F95},
{0x0f000880, 0x000003DD},
- {0x0f000840, 0x0FFF0000}, /* Changed source for X-bar and MIPS clock to APLL */
+ {0x0f000840, 0x0FFF0000}, /* Changed source for X-bar and MIPS clock to APLL */
{0x0f000860, 0x00000000},
{0x0F00a044, 0x1fffffff},
{0x0F00a040, 0x1f000000},
{0x0F00a084, 0x1Cffffff},
{0x0F00a080, 0x1C000000},
{0x0F00A000, 0x00000016},
- {0x0F007000, 0x00010001}, /* Memcontroller Default values */
+ {0x0F007000, 0x00010001}, /* Memcontroller Default values */
{0x0F007004, 0x01010100},
{0x0F007008, 0x01000001},
{0x0F00700c, 0x00000000},
{0x0F007010, 0x01000000},
{0x0F007014, 0x01000100},
{0x0F007018, 0x01000000},
- {0x0F00701c, 0x01020001},/* POP - 0x00020001 Normal 0x01020001 */
- {0x0F007020, 0x04030107}, /* Normal - 0x04030107 POP - 0x05030107 */
+ {0x0F00701c, 0x01020001}, /* POP - 0x00020001 Normal 0x01020001 */
+ {0x0F007020, 0x04030107}, /* Normal - 0x04030107 POP - 0x05030107 */
{0x0F007024, 0x02000007},
{0x0F007028, 0x02020200},
- {0x0F00702c, 0x0206060a},/* ROB- 0x0205050a,//0x0206060a */
+ {0x0F00702c, 0x0206060a}, /* ROB- 0x0205050a,//0x0206060a */
{0x0F007030, 0x05000000},
{0x0F007034, 0x00000003},
- {0x0F007038, 0x200a0200},/* ROB - 0x110a0200,0x180a0200,0x1f0a0200 */
- {0x0F00703C, 0x02101020},/* ROB - 0x02101010,0x02101018, */
- {0x0F007040, 0x45711200},/* ROB - 0x45751200,0x450f1200, */
- {0x0F007044, 0x110D0D00},/* ROB - 0x110a0d00 0x111f0d00 */
+ {0x0F007038, 0x200a0200}, /* ROB - 0x110a0200,0x180a0200,0x1f0a0200 */
+ {0x0F00703C, 0x02101020}, /* ROB - 0x02101010,0x02101018, */
+ {0x0F007040, 0x45711200}, /* ROB - 0x45751200,0x450f1200, */
+ {0x0F007044, 0x110D0D00}, /* ROB - 0x110a0d00 0x111f0d00 */
{0x0F007048, 0x04080306},
{0x0F00704c, 0x00000000},
{0x0F007050, 0x0100001c},
@@ -374,42 +374,42 @@ static struct bcm_ddr_setting asT3LP_DDRSetting133MHz[] = {/* # DPLL Clock Setti
{0x0F007088, 0x01000001},
{0x0F00708c, 0x00000101},
{0x0F007090, 0x00000000},
- {0x0F007094, 0x00040000}, /*# Enable BW improvement within memory controller */
+ {0x0F007094, 0x00040000}, /*# Enable BW improvement within memory controller */
{0x0F007098, 0x00000000},
{0x0F0070c8, 0x00000104},
- /* # Enable 2 ports within X-bar */
- {0x0F007018, 0x01010000} /* # Enable start bit within memory controller */
+ /* # Enable 2 ports within X-bar */
+ {0x0F007018, 0x01010000} /* # Enable start bit within memory controller */
};
#define T3LP_SKIP_CLOCK_PROGRAM_DUMP_100MHZ 11 /* index for 0x0F007000 */
-static struct bcm_ddr_setting asT3LP_DDRSetting100MHz[] = {/* # DPLL Clock Setting */
+static struct bcm_ddr_setting asT3LP_DDRSetting100MHz[] = { /* # DPLL Clock Setting */
{0x0f000810, 0x00002F95},
{0x0f000820, 0x03F1369B},
{0x0f000840, 0x0fff0000},
{0x0f000860, 0x00000000},
{0x0f000880, 0x000003DD},
- {0x0f000840, 0x0FFF0000}, /* Changed source for X-bar and MIPS clock to APLL */
+ {0x0f000840, 0x0FFF0000}, /* Changed source for X-bar and MIPS clock to APLL */
{0x0F00a044, 0x1fffffff},
{0x0F00a040, 0x1f000000},
{0x0F00a084, 0x1Cffffff},
{0x0F00a080, 0x1C000000},
- {0x0F007000, 0x00010001}, /* Memcontroller Default values */
+ {0x0F007000, 0x00010001}, /* Memcontroller Default values */
{0x0F007004, 0x01010100},
{0x0F007008, 0x01000001},
{0x0F00700c, 0x00000000},
{0x0F007010, 0x01000000},
{0x0F007014, 0x01000100},
{0x0F007018, 0x01000000},
- {0x0F00701c, 0x01020000},/* POP - 0x00020001 Normal 0x01020001 */
- {0x0F007020, 0x04020107}, /* Normal - 0x04030107 POP - 0x05030107 */
+ {0x0F00701c, 0x01020000}, /* POP - 0x00020001 Normal 0x01020001 */
+ {0x0F007020, 0x04020107}, /* Normal - 0x04030107 POP - 0x05030107 */
{0x0F007024, 0x00000007},
{0x0F007028, 0x01020200},
- {0x0F00702c, 0x0204040a},/* ROB- 0x0205050a,//0x0206060a */
+ {0x0F00702c, 0x0204040a}, /* ROB- 0x0205050a,//0x0206060a */
{0x0F007030, 0x06000000},
{0x0F007034, 0x00000004},
- {0x0F007038, 0x1F080200},/* ROB - 0x110a0200,0x180a0200, 0x1f0a0200 */
- {0x0F00703C, 0x0203031F},/* ROB - 0x02101010,//0x02101018, */
- {0x0F007040, 0x6e001200},/* ROB - 0x45751200,//0x450f1200, */
- {0x0F007044, 0x011a0a00},/* ROB - 0x110a0d00//0x111f0d00 */
+ {0x0F007038, 0x1F080200}, /* ROB - 0x110a0200,0x180a0200, 0x1f0a0200 */
+ {0x0F00703C, 0x0203031F}, /* ROB - 0x02101010,//0x02101018, */
+ {0x0F007040, 0x6e001200}, /* ROB - 0x45751200,//0x450f1200, */
+ {0x0F007044, 0x011a0a00}, /* ROB - 0x110a0d00//0x111f0d00 */
{0x0F007048, 0x03000305},
{0x0F00704c, 0x00000000},
{0x0F007050, 0x0100001c},
@@ -432,11 +432,11 @@ static struct bcm_ddr_setting asT3LP_DDRSetting100MHz[] = {/* # DPLL Clock Setti
{0x0F007094, 0x00010000},
{0x0F007098, 0x00000000},
{0x0F0070C8, 0x00000104},
- {0x0F00A000, 0x00000016}, /* # Enable 2 ports within X-bar */
- {0x0F007018, 0x01010000} /* # Enable start bit within memory controller */
+ {0x0F00A000, 0x00000016}, /* # Enable 2 ports within X-bar */
+ {0x0F007018, 0x01010000} /* # Enable start bit within memory controller */
};
#define T3LP_SKIP_CLOCK_PROGRAM_DUMP_80MHZ 9 /* index for 0x0F007000 */
-static struct bcm_ddr_setting asT3LP_DDRSetting80MHz[] = {/* # DPLL Clock Setting */
+static struct bcm_ddr_setting asT3LP_DDRSetting80MHz[] = { /* # DPLL Clock Setting */
{0x0f000820, 0x07F13FFF},
{0x0f000810, 0x00002F95},
{0x0f000860, 0x00000000},
@@ -491,7 +491,7 @@ static struct bcm_ddr_setting asT3LP_DDRSetting80MHz[] = {/* # DPLL Clock Settin
};
/* T3 LP-B (UMA-B) */
#define T3LPB_SKIP_CLOCK_PROGRAM_DUMP_160MHZ 7 /* index for 0x0F007000 */
-static struct bcm_ddr_setting asT3LPB_DDRSetting160MHz[] = {/* # DPLL Clock Setting */
+static struct bcm_ddr_setting asT3LPB_DDRSetting160MHz[] = { /* # DPLL Clock Setting */
{0x0f000820, 0x03F137DB},
{0x0f000810, 0x01842795},
{0x0f000860, 0x00000000},
@@ -499,8 +499,8 @@ static struct bcm_ddr_setting asT3LPB_DDRSetting160MHz[] = {/* # DPLL Clock Sett
{0x0f000840, 0x0FFF0400},
{0x0F00a044, 0x1fffffff},
{0x0F00a040, 0x1f000000},
- {0x0f003050, 0x00000021},/* this is flash/eeprom clock divisor which set the flash clock to 20 MHz */
- {0x0F00a084, 0x1Cffffff},/* Now dump from her in internal memory */
+ {0x0f003050, 0x00000021}, /* this is flash/eeprom clock divisor which set the flash clock to 20 MHz */
+ {0x0F00a084, 0x1Cffffff}, /* Now dump from her in internal memory */
{0x0F00a080, 0x1C000000},
{0x0F00A000, 0x00000016},
{0x0f007000, 0x00010001},
@@ -546,36 +546,36 @@ static struct bcm_ddr_setting asT3LPB_DDRSetting160MHz[] = {/* # DPLL Clock Sett
{0x0F007018, 0x01010000}
};
#define T3LPB_SKIP_CLOCK_PROGRAM_DUMP_133MHZ 7 /* index for 0x0F007000 */
-static struct bcm_ddr_setting asT3LPB_DDRSetting133MHz[] = {/* # DPLL Clock Setting */
+static struct bcm_ddr_setting asT3LPB_DDRSetting133MHz[] = { /* # DPLL Clock Setting */
{0x0f000820, 0x03F1365B},
{0x0f000810, 0x00002F95},
{0x0f000880, 0x000003DD},
- {0x0f000840, 0x0FFF0000}, /* Changed source for X-bar and MIPS clock to APLL */
+ {0x0f000840, 0x0FFF0000}, /* Changed source for X-bar and MIPS clock to APLL */
{0x0f000860, 0x00000000},
{0x0F00a044, 0x1fffffff},
{0x0F00a040, 0x1f000000},
- {0x0f003050, 0x00000021},/* flash/eeprom clock divisor which set the flash clock to 20 MHz */
- {0x0F00a084, 0x1Cffffff},/* dump from here in internal memory */
+ {0x0f003050, 0x00000021}, /* flash/eeprom clock divisor which set the flash clock to 20 MHz */
+ {0x0F00a084, 0x1Cffffff}, /* dump from here in internal memory */
{0x0F00a080, 0x1C000000},
{0x0F00A000, 0x00000016},
- {0x0F007000, 0x00010001}, /* Memcontroller Default values */
+ {0x0F007000, 0x00010001}, /* Memcontroller Default values */
{0x0F007004, 0x01010100},
{0x0F007008, 0x01000001},
{0x0F00700c, 0x00000000},
{0x0F007010, 0x01000000},
{0x0F007014, 0x01000100},
{0x0F007018, 0x01000000},
- {0x0F00701c, 0x01020001},/* POP - 0x00020001 Normal 0x01020001 */
- {0x0F007020, 0x04030107}, /* Normal - 0x04030107 POP - 0x05030107 */
+ {0x0F00701c, 0x01020001}, /* POP - 0x00020001 Normal 0x01020001 */
+ {0x0F007020, 0x04030107}, /* Normal - 0x04030107 POP - 0x05030107 */
{0x0F007024, 0x02000007},
{0x0F007028, 0x02020200},
- {0x0F00702c, 0x0206060a},/* ROB- 0x0205050a,//0x0206060a */
+ {0x0F00702c, 0x0206060a}, /* ROB- 0x0205050a,//0x0206060a */
{0x0F007030, 0x05000000},
{0x0F007034, 0x00000003},
- {0x0F007038, 0x190a0200},/* ROB - 0x110a0200,0x180a0200, 0x1f0a0200 */
- {0x0F00703C, 0x02101017},/* ROB - 0x02101010,0x02101018, */
- {0x0F007040, 0x45171200},/* ROB - 0x45751200,0x450f1200, */
- {0x0F007044, 0x11290D00},/* ROB - 0x110a0d00//0x111f0d00 */
+ {0x0F007038, 0x190a0200}, /* ROB - 0x110a0200,0x180a0200, 0x1f0a0200 */
+ {0x0F00703C, 0x02101017}, /* ROB - 0x02101010,0x02101018, */
+ {0x0F007040, 0x45171200}, /* ROB - 0x45751200,0x450f1200, */
+ {0x0F007044, 0x11290D00}, /* ROB - 0x110a0d00//0x111f0d00 */
{0x0F007048, 0x04080306},
{0x0F00704c, 0x00000000},
{0x0F007050, 0x0100001c},
@@ -595,43 +595,43 @@ static struct bcm_ddr_setting asT3LPB_DDRSetting133MHz[] = {/* # DPLL Clock Sett
{0x0F007088, 0x01000001},
{0x0F00708c, 0x00000101},
{0x0F007090, 0x00000000},
- {0x0F007094, 0x00040000}, /* # Enable BW improvement within memory controller */
+ {0x0F007094, 0x00040000}, /* # Enable BW improvement within memory controller */
{0x0F007098, 0x00000000},
{0x0F0070c8, 0x00000104},
- /* # Enable 2 ports within X-bar */
- {0x0F007018, 0x01010000} /* # Enable start bit within memory controller */
+ /* # Enable 2 ports within X-bar */
+ {0x0F007018, 0x01010000} /* # Enable start bit within memory controller */
};
#define T3LPB_SKIP_CLOCK_PROGRAM_DUMP_100MHZ 8 /*index for 0x0F007000 */
-static struct bcm_ddr_setting asT3LPB_DDRSetting100MHz[] = {/* # DPLL Clock Setting */
+static struct bcm_ddr_setting asT3LPB_DDRSetting100MHz[] = { /* # DPLL Clock Setting */
{0x0f000810, 0x00002F95},
{0x0f000820, 0x03F1369B},
{0x0f000840, 0x0fff0000},
{0x0f000860, 0x00000000},
{0x0f000880, 0x000003DD},
- {0x0f000840, 0x0FFF0000}, /* Changed source for X-bar and MIPS clock to APLL */
+ {0x0f000840, 0x0FFF0000}, /* Changed source for X-bar and MIPS clock to APLL */
{0x0F00a044, 0x1fffffff},
{0x0F00a040, 0x1f000000},
- {0x0f003050, 0x00000021},/* flash/eeprom clock divisor which set the flash clock to 20 MHz */
- {0x0F00a084, 0x1Cffffff}, /* dump from here in internal memory */
+ {0x0f003050, 0x00000021}, /* flash/eeprom clock divisor which set the flash clock to 20 MHz */
+ {0x0F00a084, 0x1Cffffff}, /* dump from here in internal memory */
{0x0F00a080, 0x1C000000},
- {0x0F007000, 0x00010001}, /* Memcontroller Default values */
+ {0x0F007000, 0x00010001}, /* Memcontroller Default values */
{0x0F007004, 0x01010100},
{0x0F007008, 0x01000001},
{0x0F00700c, 0x00000000},
{0x0F007010, 0x01000000},
{0x0F007014, 0x01000100},
{0x0F007018, 0x01000000},
- {0x0F00701c, 0x01020000},/* POP - 0x00020001 Normal 0x01020001 */
- {0x0F007020, 0x04020107}, /* Normal - 0x04030107 POP - 0x05030107 */
+ {0x0F00701c, 0x01020000}, /* POP - 0x00020001 Normal 0x01020001 */
+ {0x0F007020, 0x04020107}, /* Normal - 0x04030107 POP - 0x05030107 */
{0x0F007024, 0x00000007},
{0x0F007028, 0x01020200},
- {0x0F00702c, 0x0204040a},/*ROB- 0x0205050a,//0x0206060a */
+ {0x0F00702c, 0x0204040a}, /*ROB- 0x0205050a,//0x0206060a */
{0x0F007030, 0x06000000},
{0x0F007034, 0x00000004},
- {0x0F007038, 0x1F080200},/* ROB - 0x110a0200,0x180a0200, 0x1f0a0200 */
- {0x0F00703C, 0x0203031F},/* ROB - 0x02101010,//0x02101018, */
- {0x0F007040, 0x6e001200},/* ROB - 0x45751200,//0x450f1200, */
- {0x0F007044, 0x011a0a00},/* ROB - 0x110a0d00//0x111f0d00 */
+ {0x0F007038, 0x1F080200}, /* ROB - 0x110a0200,0x180a0200, 0x1f0a0200 */
+ {0x0F00703C, 0x0203031F}, /* ROB - 0x02101010,//0x02101018, */
+ {0x0F007040, 0x6e001200}, /* ROB - 0x45751200,//0x450f1200, */
+ {0x0F007044, 0x011a0a00}, /* ROB - 0x110a0d00//0x111f0d00 */
{0x0F007048, 0x03000305},
{0x0F00704c, 0x00000000},
{0x0F007050, 0x0100001c},
@@ -654,11 +654,11 @@ static struct bcm_ddr_setting asT3LPB_DDRSetting100MHz[] = {/* # DPLL Clock Sett
{0x0F007094, 0x00010000},
{0x0F007098, 0x00000000},
{0x0F0070C8, 0x00000104},
- {0x0F00A000, 0x00000016}, /* # Enable 2 ports within X-bar */
- {0x0F007018, 0x01010000} /* # Enable start bit within memory controller */
+ {0x0F00A000, 0x00000016}, /* # Enable 2 ports within X-bar */
+ {0x0F007018, 0x01010000} /* # Enable start bit within memory controller */
};
#define T3LPB_SKIP_CLOCK_PROGRAM_DUMP_80MHZ 7 /*index for 0x0F007000 */
-static struct bcm_ddr_setting asT3LPB_DDRSetting80MHz[] = {/* # DPLL Clock Setting */
+static struct bcm_ddr_setting asT3LPB_DDRSetting80MHz[] = { /* # DPLL Clock Setting */
{0x0f000820, 0x07F13FFF},
{0x0f000810, 0x00002F95},
{0x0f000860, 0x00000000},
@@ -666,8 +666,8 @@ static struct bcm_ddr_setting asT3LPB_DDRSetting80MHz[] = {/* # DPLL Clock Setti
{0x0f000840, 0x0FFF1F00},
{0x0F00a044, 0x1fffffff},
{0x0F00a040, 0x1f000000},
- {0x0f003050, 0x00000021},/* flash/eeprom clock divisor which set the flash clock to 20 MHz */
- {0x0F00a084, 0x1Cffffff},/* dump from here in internal memory */
+ {0x0f003050, 0x00000021}, /* flash/eeprom clock divisor which set the flash clock to 20 MHz */
+ {0x0F00a084, 0x1Cffffff}, /* dump from here in internal memory */
{0x0F00a080, 0x1C000000},
{0x0F00A000, 0x00000016},
{0x0f007000, 0x00010001},
@@ -753,9 +753,9 @@ int ddr_init(struct bcm_mini_adapter *Adapter)
case BCS220_2BC:
case BCS250_BC:
case BCS220_3:
- /* Set bit 2 and bit 6 to 1 for BBIC 2mA drive
- * (please check current value and additionally set these bits)
- */
+/* Set bit 2 and bit 6 to 1 for BBIC 2mA drive
+ * (please check current value and additionally set these bits)
+ */
if ((Adapter->chip_id != BCS220_2) &&
(Adapter->chip_id != BCS220_2BC) &&
(Adapter->chip_id != BCS220_3)) {
@@ -839,7 +839,7 @@ int ddr_init(struct bcm_mini_adapter *Adapter)
sizeof(struct bcm_ddr_setting));
break;
case DDR_133_MHZ:
- if (Adapter->bDPLLConfig == PLL_266_MHZ) { /*266Mhz PLL selected. */
+ if (Adapter->bDPLLConfig == PLL_266_MHZ) { /*266Mhz PLL selected. */
memcpy(asT3B_DDRSetting133MHz, asDPLL_266MHZ,
sizeof(asDPLL_266MHZ));
psDDRSetting = asT3B_DDRSetting133MHz;
@@ -915,8 +915,8 @@ int ddr_init(struct bcm_mini_adapter *Adapter)
* This is to be done only for Hybrid PMU mode.
* with the current h/w there is no way to detect this.
* and since we dont have internal PMU lets do it under UMA-B chip id.
- * we will change this when we will have internal PMU.
- */
+ * we will change this when we will have internal PMU.
+ */
if (Adapter->PmuMode == HYBRID_MODE_7C) {
retval = rdmalt(Adapter, (UINT)0x0f000c00, &uiResetValue, sizeof(uiResetValue));
if (retval < 0) {
@@ -1119,7 +1119,7 @@ int download_ddr_settings(struct bcm_mini_adapter *Adapter)
return retval;
}
ul_ddr_setting_load_addr += sizeof(ULONG);
- /*signature */
+ /* signature */
value = (0x1d1e0dd0);
retval = wrmalt(Adapter, ul_ddr_setting_load_addr, &value, sizeof(value));
if (retval) {
@@ -1158,3 +1158,4 @@ int download_ddr_settings(struct bcm_mini_adapter *Adapter)
}

+
--
1.8.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Gary Rookard: "[PATCH 03/10] Staging: bcm: DDRInit: added space after commas."
Previous message: Guenter Roeck: "Re: [PATCH 3.4 00/32] 3.4.73-stable review"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]