Re: [PATCH 3/3] ARM: sunxi: dts: Add ahci support to a few A10 andA20 boards

[Maxime Ripard]

Hi Oliver,

On Wed, Dec 04, 2013 at 01:10:55PM +0100, oliver@xxxxxxxxxxx wrote:
> From: Oliver Schinagl <oliver@xxxxxxxxxxx>
> 
> This patch adds sunxi sata support to A10 and A20 boards that have such
> a connector. Some boards also feature a regulator via a GPIO and support
> for this is also added.
> 
> Signed-off-by: Olliver Schinagl <oliver@xxxxxxxxxxx>

Your git setup seems to be pretty uncertain about how your first name is spelled :)

> ---
>  arch/arm/boot/dts/sun4i-a10-cubieboard.dts      | 26 +++++++++++++++++++++++++
>  arch/arm/boot/dts/sun4i-a10.dtsi                |  9 +++++++++
>  arch/arm/boot/dts/sun7i-a20-cubieboard2.dts     | 26 +++++++++++++++++++++++++
>  arch/arm/boot/dts/sun7i-a20-cubietruck.dts      | 26 +++++++++++++++++++++++++
>  arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts | 26 +++++++++++++++++++++++++
>  arch/arm/boot/dts/sun7i-a20.dtsi                |  9 +++++++++
>  6 files changed, 122 insertions(+)

Could you split this into several patches please?

At least one per SoC.

> diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
> index 425a7db..b620084 100644
> --- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
> +++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
> @@ -42,7 +42,18 @@
>  			};
>  		};
>  
> +		sata: ahci@01c18000 {
> +			pwr-supply = <&reg_ahci_5v>;
> +			status = "okay";
> +		};
> +
>  		pinctrl@01c20800 {
> +			ahci_pwr_pin: ahci_pwr_pin@0 {

Please prefix it with name of the board.

> +				allwinner,pins = "PB8";
> +				allwinner,function = "gpio_out";
> +				allwinner,driver = <0>;
> +				allwinner,pull = <0>;
> +			};

Please add a newline here.

>  			led_pins_cubieboard: led_pins@0 {
>  				allwinner,pins = "PH20", "PH21";
>  				allwinner,function = "gpio_out";
> @@ -86,4 +97,19 @@
>  			linux,default-trigger = "heartbeat";
>  		};
>  	};
> +
> +	regulators {
> +		compatible = "simple-bus";
> +		pinctrl-names = "default";
> +
> +		reg_ahci_5v: ahci-5v {
> +			compatible = "regulator-fixed";
> +			regulator-name = "ahci-5v";
> +			regulator-min-microvolt = <5000000>;
> +			regulator-max-microvolt = <5000000>;
> +			pinctrl-0 = <&ahci_pwr_pin>;
> +			gpio = <&pio 1 8 0>;
> +			enable-active-high;
> +		};
> +	};
>  };
> diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
> index 4dccdb0..53c6cdb 100644
> --- a/arch/arm/boot/dts/sun4i-a10.dtsi
> +++ b/arch/arm/boot/dts/sun4i-a10.dtsi
> @@ -306,6 +306,15 @@
>  			#size-cells = <0>;
>  		};
>  
> +		sata: ahci@01c18000 {
> +			compatible = "allwinner,sun4i-a10-ahci";

Please use sun4i-ahci for consistency.

> +			reg = <0x01c18000 0x1000>;
> +			interrupts = <0 56 1>;

The interrupt here doesn't seem right. Is it actually working at all?

> +			clocks = <&ahb_gates 25>, <&pll6 0>;
> +			clock-names = "ahb_sata", "pll6_sata";
> +			status = "disabled";
> +		};
> +
>  		intc: interrupt-controller@01c20400 {
>  			compatible = "allwinner,sun4i-ic";
>  			reg = <0x01c20400 0x400>;
> diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
> index 5c51cb8..99c5e78 100644
> --- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
> +++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
> @@ -34,7 +34,18 @@
>  			};
>  		};
>  
> +		sata: ahci@01c18000 {
> +			pwr-supply = <&reg_ahci_5v>;
> +			status = "okay";
> +		};
> +
>  		pinctrl@01c20800 {
> +			ahci_pwr_pin: ahci_pwr_pin@0 {
> +				allwinner,pins = "PB8";
> +				allwinner,function = "gpio_out";
> +				allwinner,drive = <0>;
> +				allwinner,pull = <0>;
> +			};

Please add a newline here.

>  			led_pins_cubieboard2: led_pins@0 {
>  				allwinner,pins = "PH20", "PH21";
>  				allwinner,function = "gpio_out";
> @@ -77,4 +88,19 @@
>  			gpios = <&pio 7 20 0>;
>  		};
>  	};
> +
> +	regulators {
> +		compatible = "simple-bus";
> +		pinctrl-names = "default";
> +
> +		reg_ahci_5v: ahci-5v {
> +			compatible = "regulator-fixed";
> +			regulator-name = "ahci-5v";
> +			regulator-min-microvolt = <5000000>;
> +			regulator-max-microvolt = <5000000>;
> +			pinctrl-0 = <&ahci_pwr_pin>;
> +			gpio = <&pio 1 8 0>;
> +			enable-active-high;
> +		};
> +	};
>  };
> diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
> index 8a1009d..19af23e 100644
> --- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
> +++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
> @@ -19,7 +19,18 @@
>  	compatible = "cubietech,cubietruck", "allwinner,sun7i-a20";
>  
>  	soc@01c00000 {
> +		sata: ahci@01c18000 {
> +			pwr-supply = <&reg_ahci_5v>;
> +			status = "okay";
> +		};
> +
>  		pinctrl@01c20800 {
> +			ahci_pwr_pin: ahci_pwr_pin@0 {
> +				allwinner,pins = "PH12";
> +				allwinner,function = "gpio_out";
> +				allwinner,driver = <0>;
> +				allwinner,pull = <0>;
> +			};

Please add a newline here.

>  			led_pins_cubietruck: led_pins@0 {
>  				allwinner,pins = "PH7", "PH11", "PH20", "PH21";
>  				allwinner,function = "gpio_out";
> @@ -60,4 +71,19 @@
>  			gpios = <&pio 7 7 0>;
>  		};
>  	};
> +
> +	regulators {
> +		compatible = "simple-bus";
> +		pinctrl-names = "default";
> +
> +		reg_ahci_5v: ahci-5v {
> +			compatible = "regulator-fixed";
> +			regulator-name = "ahci-5v";
> +			regulator-min-microvolt = <5000000>;
> +			regulator-max-microvolt = <5000000>;
> +			pinctrl-0 = <&ahci_pwr_pin>;
> +			gpio = <&pio 7 12 0>;
> +			enable-active-high;
> +		};
> +	};
>  };
> diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
> index ead3013..23ed708 100644
> --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
> +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
> @@ -34,7 +34,19 @@
>  			};
>  		};
>  
> +		sata: ahci@01c18000 {
> +			pwr-supply = <&reg_ahci_5v>;
> +			status = "okay";
> +		};
> +
>  		pinctrl@01c20800 {
> +			ahci_pwr_pin: ahci_pwr_pin@0 {
> +				allwinner,pins = "PB8";
> +				allwinner,function = "gpio_out";
> +				allwinner,drive = <0>;
> +				allwinner,pull = <0>;
> +			};
> +
>  			led_pins_olinuxino: led_pins@0 {
>  				allwinner,pins = "PH2";
>  				allwinner,function = "gpio_out";
> @@ -91,4 +103,18 @@
>  			default-state = "on";
>  		};
>  	};
> +
> +	regulators {
> +		compatible = "simple-bus";
> +
> +		reg_ahci_5v: ahci-5v {
> +			compatible = "regulator-fixed";
> +			regulator-name = "ahci-5v";
> +			regulator-min-microvolt = <5000000>;
> +			regulator-max-microvolt = <5000000>;
> +			pinctrl-0 = <&ahci_pwr_pin>;
> +			gpio = <&pio 1 8 0>;
> +			enable-active-high;
> +		};
> +	};
>  };
> diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
> index 0552a64..b72c69e 100644
> --- a/arch/arm/boot/dts/sun7i-a20.dtsi
> +++ b/arch/arm/boot/dts/sun7i-a20.dtsi
> @@ -368,6 +368,15 @@
>  			};
>  		};
>  
> +		sata: ahci@01c18000 {
> +			compatible = "allwinner,sun4i-a10-ahci";
> +			reg = <0x01c18000 0x1000>;
> +			interrupts = <0 56 1>;
> +			clocks = <&ahb_gates 25>, <&pll6 0>;
> +			clock-names = "ahb_sata", "pll6_sata";
> +			status = "disabled";
> +		};
> +
>  		timer@01c20c00 {
>  			compatible = "allwinner,sun4i-timer";
>  			reg = <0x01c20c00 0x90>;
> -- 
> 1.8.3.2
> 

Thanks,
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

Attachment: signature.asc
Description: Digital signature