[PATCH] ARM: dts: stmpe-ts: fix wrong bindings

[Stefan Agner]

Fix bindings for STMPE touchscreen device to match the documented
bindings and the actual bindings used by the driver.

Signed-off-by: Stefan Agner <stefan@xxxxxxxx>
---
I don't have any of these hardware, but the error is obvious. The device
probably works anyway since the device/driver will use default values.
---
 arch/arm/boot/dts/imx53-m53evk.dts  | 20 ++++++++++----------
 arch/arm/boot/dts/spear1310-evb.dts | 18 +++++++++---------
 arch/arm/boot/dts/spear1340-evb.dts | 18 +++++++++---------
 arch/arm/boot/dts/spear320-hmi.dts  | 20 ++++++++++----------
 4 files changed, 38 insertions(+), 38 deletions(-)

diff --git a/arch/arm/boot/dts/imx53-m53evk.dts b/arch/arm/boot/dts/imx53-m53evk.dts
index 7d304d0..e97f298 100644
--- a/arch/arm/boot/dts/imx53-m53evk.dts
+++ b/arch/arm/boot/dts/imx53-m53evk.dts
@@ -165,17 +165,17 @@
 		irq-trigger = <0x1>;
 
 		stmpe_touchscreen {
-			compatible = "stmpe,ts";
+			compatible = "st,stmpe-ts";
 			reg = <0>;
-			ts,sample-time = <4>;
-			ts,mod-12b = <1>;
-			ts,ref-sel = <0>;
-			ts,adc-freq = <1>;
-			ts,ave-ctrl = <3>;
-			ts,touch-det-delay = <3>;
-			ts,settling = <4>;
-			ts,fraction-z = <7>;
-			ts,i-drive = <1>;
+			st,sample-time = <4>;
+			st,mod-12b = <1>;
+			st,ref-sel = <0>;
+			st,adc-freq = <1>;
+			st,ave-ctrl = <3>;
+			st,touch-det-delay = <3>;
+			st,settling = <4>;
+			st,fraction-z = <7>;
+			st,i-drive = <1>;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/spear1310-evb.dts b/arch/arm/boot/dts/spear1310-evb.dts
index b56a801..fe2ece2 100644
--- a/arch/arm/boot/dts/spear1310-evb.dts
+++ b/arch/arm/boot/dts/spear1310-evb.dts
@@ -369,15 +369,15 @@
 
 					stmpe_touchscreen {
 						compatible = "st,stmpe-ts";
-						ts,sample-time = <4>;
-						ts,mod-12b = <1>;
-						ts,ref-sel = <0>;
-						ts,adc-freq = <1>;
-						ts,ave-ctrl = <1>;
-						ts,touch-det-delay = <2>;
-						ts,settling = <2>;
-						ts,fraction-z = <7>;
-						ts,i-drive = <1>;
+						st,sample-time = <4>;
+						st,mod-12b = <1>;
+						st,ref-sel = <0>;
+						st,adc-freq = <1>;
+						st,ave-ctrl = <1>;
+						st,touch-det-delay = <2>;
+						st,settling = <2>;
+						st,fraction-z = <7>;
+						st,i-drive = <1>;
 					};
 				};
 
diff --git a/arch/arm/boot/dts/spear1340-evb.dts b/arch/arm/boot/dts/spear1340-evb.dts
index d6c30ae..d3dcba9 100644
--- a/arch/arm/boot/dts/spear1340-evb.dts
+++ b/arch/arm/boot/dts/spear1340-evb.dts
@@ -480,15 +480,15 @@
 
 					stmpe_touchscreen {
 						compatible = "st,stmpe-ts";
-						ts,sample-time = <4>;
-						ts,mod-12b = <1>;
-						ts,ref-sel = <0>;
-						ts,adc-freq = <1>;
-						ts,ave-ctrl = <1>;
-						ts,touch-det-delay = <2>;
-						ts,settling = <2>;
-						ts,fraction-z = <7>;
-						ts,i-drive = <1>;
+						st,sample-time = <4>;
+						st,mod-12b = <1>;
+						st,ref-sel = <0>;
+						st,adc-freq = <1>;
+						st,ave-ctrl = <1>;
+						st,touch-det-delay = <2>;
+						st,settling = <2>;
+						st,fraction-z = <7>;
+						st,i-drive = <1>;
 					};
 				};
 
diff --git a/arch/arm/boot/dts/spear320-hmi.dts b/arch/arm/boot/dts/spear320-hmi.dts
index 3075d2d..2a5d013 100644
--- a/arch/arm/boot/dts/spear320-hmi.dts
+++ b/arch/arm/boot/dts/spear320-hmi.dts
@@ -256,17 +256,17 @@
 					};
 
 					stmpe610-ts {
-						compatible = "stmpe,ts";
+						compatible = "st,stmpe-ts";
 						reg = <0>;
-						ts,sample-time = <4>;
-						ts,mod-12b = <1>;
-						ts,ref-sel = <0>;
-						ts,adc-freq = <1>;
-						ts,ave-ctrl = <1>;
-						ts,touch-det-delay = <3>;
-						ts,settling = <4>;
-						ts,fraction-z = <7>;
-						ts,i-drive = <1>;
+						st,sample-time = <4>;
+						st,mod-12b = <1>;
+						st,ref-sel = <0>;
+						st,adc-freq = <1>;
+						st,ave-ctrl = <1>;
+						st,touch-det-delay = <3>;
+						st,settling = <4>;
+						st,fraction-z = <7>;
+						st,i-drive = <1>;
 					};
 				};
 			};
-- 
1.8.4.2

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/