Re: [lm-sensors] [PATCH] hwmon: HIH-6130: Support I2C bus driverswithout I2C_FUNC_SMBUS_QUICK

[Guenter Roeck]

On 12/10/2013 04:57 PM, Josà Miguel GonÃalves wrote:
> Some I2C bus drivers do not allow zero-lenght data transfers which are

s/lenght/length/

> required to start a mesurement with the HIH6130/1 sensor. Nevertheless,

s/mesurement/measurement/

> we can overcome this limitation by writing a zero dummy byte. This byte
> is ignored by the sensor and was verified to be working with the OMAP
> I2C bus driver in a BeagleBone board.
>
> Signed-off-by: Josà Miguel GonÃalves <jose.goncalves@xxxxxxx>
> ---
>   drivers/hwmon/hih6130.c |   16 ++++++++++++++--
>   1 file changed, 14 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/hwmon/hih6130.c b/drivers/hwmon/hih6130.c
> index 2dc37c7..a860cc4 100644
> --- a/drivers/hwmon/hih6130.c
> +++ b/drivers/hwmon/hih6130.c
> @@ -121,8 +121,20 @@ static int hih6130_update_measurements(struct i2c_client *client)
>   	 */
>   	if (time_after(jiffies, hih6130->last_update + HZ) || !hih6130->valid) {
>
> -		/* write to slave address, no data, to request a measurement */
> -		ret = i2c_master_send(client, tmp, 0);
> +		/*
> +		 * Write to slave address, to request a measurement.

s/,//

> +		 * According with the datasheet it should be with no data, but
> +		 * for systems with I2C bus drivers that do not allow zero
> +		 * length packets we write one dummy byte to allow sensor
> +		 * measurements on them.
> +		 */
> +		if (i2c_get_functionality(client->adapter) &
> +		    I2C_FUNC_SMBUS_QUICK) {
> +			ret = i2c_master_send(client, tmp, 0);
> +		} else {
> +			tmp[0] = 0;
> +			ret = i2c_master_send(client, tmp, 1);
> +		}

You can simplify this code by introducing a variable to hold
the write length into struct hih6130. This variable can be
initialized with 1 or 0 in the probe function.

	if (i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_QUICK))
		hih6130->write_length = 0;
	else
		hih6130->write_length = 1;

Then replace above code with

	tmp[0] = 0;
	ret = i2c_master_send(client, tmp, hih6130->write_length);

This way you don't have to call i2c_{get,check}_functionality() repeatedly.

Thanks,
Guenter
	
>   		if (ret < 0)
>   			goto out;

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/