Re: [Xen-devel] [RFC PATCH] Xen PCI back - do slot and bus reset(v0).

[Konrad Rzeszutek Wilk]

On Mon, Dec 16, 2013 at 04:23:53PM +0100, Sander Eikelenboom wrote:
> 
> Monday, December 16, 2013, 3:35:15 PM, you wrote:
> 
> > On Mon, Dec 16, 2013 at 10:59:01AM +0000, David Vrabel wrote:
> >> On 13/12/13 16:09, Konrad Rzeszutek Wilk wrote:
> >> > Hey,
> >> > 
> >> > While I was trying to narrow down the state of GPU passthrough
> >> > (still not finished) and figuring what needs to be done I realized
> >> > that Xen PCIback did not reset my GPU properly (when I crashed the
> >> > Windows guest by mistake). It does an FLR reset or Power one - if
> >> > the device supports it. But it seems that some of these GPUs
> >> > are liars and actually don't do the power part properly.
> >> 
> >> In my experience the devices do not lie.  They correctly report that
> >> they do not perform a reset in D3hot.
> >> 
> >> Here's the patch I'm using to solve this.  It does something similar.
> >> i.e., a SBR if all devices on that bus are safe to be reset.
> >> 
> >> I prefer it because it provides the standard 'reset' sysfs file that the
> >> toolstack/userspace can use.
> 
> > We can still add the 'reset' to SysFS
> >> 
> >> It does have some limitations:  a) It does not check whether a device is
> >> in use (only if it is bound to pciback); and b) it hand rolls
> >> pci_slot_reset() (because it didn't exist at the time).
> 
> > .. which can have those limiations removed and be based on this patchset.
> > Meaning it won't do a bus-reset or device reset if the rest of the devices
> > are _not_ assigned to pciback.
> 
> Perhaps there is something to learn from the steps vfio-pci takes to do this ?
> (they sorted out quite some stuff around pci/vga passtrough)

That is actually what I based it on :-)

> 
> >> 
> >> diff --git a/drivers/xen/xen-pciback/pci_stub.c
> >> b/drivers/xen/xen-pciback/pci_stub.c
> >> index 4e8ba38..5a03e63 100644
> >> --- a/drivers/xen/xen-pciback/pci_stub.c
> >> +++ b/drivers/xen/xen-pciback/pci_stub.c
> >> @@ -14,6 +14,7 @@
> >>  #include <linux/wait.h>
> >>  #include <linux/sched.h>
> >>  #include <linux/atomic.h>
> >> +#include <linux/delay.h>
> >>  #include <xen/events.h>
> >>  #include <asm/xen/pci.h>
> >>  #include <asm/xen/hypervisor.h>
> >> @@ -43,6 +44,7 @@ struct pcistub_device {
> >>       struct kref kref;
> >>       struct list_head dev_list;
> >>       spinlock_t lock;
> >> +     bool created_reset_file;
> >> 
> >>       struct pci_dev *dev;
> >>       struct xen_pcibk_device *pdev;/* non-NULL if struct pci_dev is in use */
> >> @@ -60,6 +62,114 @@ static LIST_HEAD(pcistub_devices);
> >>  static int initialize_devices;
> >>  static LIST_HEAD(seized_devices);
> >> 
> >> +/*
> >> + * pci_reset_function() will only work if there is a mechanism to
> >> + * reset that single function (e.g., FLR or a D-state transition).
> >> + * For PCI hardware that has two or more functions but no per-function
> >> + * reset, we can do a bus reset iff all the functions are co-assigned
> >> + * to the same domain.
> >> + *
> >> + * If a function has no per-function reset mechanism the 'reset' sysfs
> >> + * file that the toolstack uses to reset a function prior to assigning
> >> + * the device will be missing.  In this case, pciback adds its own
> >> + * which will try a bus reset.
> >> + *
> >> + * Note: pciback does not check for co-assigment before doing a bus
> >> + * reset, only that the devices are bound to pciback.  The toolstack
> >> + * is assumed to have done the right thing.
> >> + */
> >> +static int __pcistub_reset_function(struct pci_dev *dev)
> >> +{
> >> +     struct pci_dev *pdev;
> >> +     u16 ctrl;
> >> +     int ret;
> >> +
> >> +     ret = __pci_reset_function_locked(dev);
> >> +     if (ret == 0)
> >> +             return 0;
> >> +
> >> +     if (pci_is_root_bus(dev->bus) || dev->subordinate || !dev->bus->self)
> >> +             return -ENOTTY;
> >> +
> >> +     list_for_each_entry(pdev, &dev->bus->devices, bus_list) {
> >> +             if (pdev != dev && (!pdev->driver
> >> +                                 || strcmp(pdev->driver->name, "pciback")))
> >> +                     return -ENOTTY;
> >> +             pci_save_state(pdev);
> >> +     }
> >> +
> >> +     pci_read_config_word(dev->bus->self, PCI_BRIDGE_CONTROL, &ctrl);
> >> +     ctrl |= PCI_BRIDGE_CTL_BUS_RESET;
> >> +     pci_write_config_word(dev->bus->self, PCI_BRIDGE_CONTROL, ctrl);
> >> +     msleep(200);
> >> +
> >> +     ctrl &= ~PCI_BRIDGE_CTL_BUS_RESET;
> >> +     pci_write_config_word(dev->bus->self, PCI_BRIDGE_CONTROL, ctrl);
> >> +     msleep(200);
> >> +
> >> +     list_for_each_entry(pdev, &dev->bus->devices, bus_list)
> >> +             pci_restore_state(pdev);
> >> +
> >> +     return 0;
> >> +}
> >> +
> >> +static int pcistub_reset_function(struct pci_dev *dev)
> >> +{
> >> +     int ret;
> >> +
> >> +     device_lock(&dev->dev);
> >> +     ret = __pcistub_reset_function(dev);
> >> +     device_unlock(&dev->dev);
> >> +
> >> +     return ret;
> >> +}
> >> +
> >> +static ssize_t pcistub_reset_store(struct device *dev,
> >> +                                struct device_attribute *attr,
> >> +                                const char *buf, size_t count)
> >> +{
> >> +     struct pci_dev *pdev = to_pci_dev(dev);
> >> +     unsigned long val;
> >> +     ssize_t result = strict_strtoul(buf, 0, &val);
> >> +
> >> +     if (result < 0)
> >> +             return result;
> >> +
> >> +     if (val != 1)
> >> +             return -EINVAL;
> >> +
> >> +     result = pcistub_reset_function(pdev);
> >> +     if (result < 0)
> >> +             return result;
> >> +     return count;
> >> +}
> >> +static DEVICE_ATTR(reset, 0200, NULL, pcistub_reset_store);
> >> +
> >> +static int pcistub_try_create_reset_file(struct pcistub_device *psdev)
> >> +{
> >> +     struct device *dev = &psdev->dev->dev;
> >> +     struct sysfs_dirent *reset_dirent;
> >> +     int ret;
> >> +
> >> +     reset_dirent = sysfs_get_dirent(dev->kobj.sd, NULL, "reset");
> >> +     if (reset_dirent) {
> >> +             sysfs_put(reset_dirent);
> >> +             return 0;
> >> +     }
> >> +
> >> +     ret = device_create_file(dev, &dev_attr_reset);
> >> +     if (ret < 0)
> >> +             return ret;
> >> +     psdev->created_reset_file = true;
> >> +     return 0;
> >> +}
> >> +
> >> +static void pcistub_remove_reset_file(struct pcistub_device *psdev)
> >> +{
> >> +     if (psdev && psdev->created_reset_file)
> >> +             device_remove_file(&psdev->dev->dev, &dev_attr_reset);
> >> +}
> >> +
> >>  static struct pcistub_device *pcistub_device_alloc(struct pci_dev *dev)
> >>  {
> >>       struct pcistub_device *psdev;
> >> @@ -95,12 +205,15 @@ static void pcistub_device_release(struct kref *kref)
> >> 
> >>       dev_dbg(&dev->dev, "pcistub_device_release\n");
> >> 
> >> +     pcistub_remove_reset_file(psdev);
> >> +
> >>       xen_unregister_device_domain_owner(dev);
> >> 
> >>       /* Call the reset function which does not take lock as this
> >>        * is called from "unbind" which takes a device_lock mutex.
> >>        */
> >> -     __pci_reset_function_locked(dev);
> >> +     __pcistub_reset_function(psdev->dev);
> >> +
> >>       if (pci_load_and_free_saved_state(dev, &dev_data->pci_saved_state))
> >>               dev_dbg(&dev->dev, "Could not reload PCI state\n");
> >>       else
> >> @@ -268,7 +381,7 @@ void pcistub_put_pci_dev(struct pci_dev *dev)
> >>       /* This is OK - we are running from workqueue context
> >>        * and want to inhibit the user from fiddling with 'reset'
> >>        */
> >> -     pci_reset_function(dev);
> >> +     pcistub_reset_function(psdev->dev);
> >>       pci_restore_state(psdev->dev);
> >> 
> >>       /* This disables the device. */
> >> @@ -392,7 +505,7 @@ static int pcistub_init_device(struct pci_dev *dev)
> >>               dev_err(&dev->dev, "Could not store PCI conf saved state!\n");
> >>       else {
> >>               dev_dbg(&dev->dev, "resetting (FLR, D3, etc) the device\n");
> >> -             __pci_reset_function_locked(dev);
> >> +             __pcistub_reset_function(dev);
> >>               pci_restore_state(dev);
> >>       }
> >>       /* Now disable the device (this also ensures some private device
> >> @@ -467,6 +580,10 @@ static int pcistub_seize(struct pci_dev *dev)
> >>       if (!psdev)
> >>               return -ENOMEM;
> >> 
> >> +     err = pcistub_try_create_reset_file(psdev);
> >> +     if (err < 0)
> >> +             goto out;
> >> +
> >>       spin_lock_irqsave(&pcistub_devices_lock, flags);
> >> 
> >>       if (initialize_devices) {
> >> @@ -485,10 +602,9 @@ static int pcistub_seize(struct pci_dev *dev)
> >>       }
> >> 
> >>       spin_unlock_irqrestore(&pcistub_devices_lock, flags);
> >> -
> >> +out:
> >>       if (err)
> >>               pcistub_device_put(psdev);
> >> -
> >>       return err;
> >>  }
> >> 
> 
> 
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/