[PATCH v2 3/4] x86: intel-mid: add Merrifield platform support

From: David Cohen
Date: Mon Dec 16 2013 - 15:03:13 EST


This code was partially based on Mark Brown's previous work.

Signed-off-by: David Cohen <david.a.cohen@xxxxxxxxxxxxxxx>
Signed-off-by: Fei Yang <fei.yang@xxxxxxxxx>
Cc: Mark F. Brown <mark.f.brown@xxxxxxxxx>
Cc: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@xxxxxxxxxxxxxxx>
---
arch/x86/include/asm/intel-mid.h | 2 +
arch/x86/pci/intel_mid_pci.c | 6 +-
arch/x86/platform/intel-mid/Makefile | 2 +-
arch/x86/platform/intel-mid/intel-mid.c | 4 +
arch/x86/platform/intel-mid/intel_mid_weak_decls.h | 1 +
arch/x86/platform/intel-mid/mrfl.c | 103 +++++++++++++++++++++
arch/x86/platform/intel-mid/sfi.c | 34 +++++--
7 files changed, 144 insertions(+), 8 deletions(-)
create mode 100644 arch/x86/platform/intel-mid/mrfl.c

diff --git a/arch/x86/include/asm/intel-mid.h b/arch/x86/include/asm/intel-mid.h
index f8a831431fe0..e34e097b6f9d 100644
--- a/arch/x86/include/asm/intel-mid.h
+++ b/arch/x86/include/asm/intel-mid.h
@@ -52,6 +52,7 @@ enum intel_mid_cpu_type {
/* 1 was Moorestown */
INTEL_MID_CPU_CHIP_PENWELL = 2,
INTEL_MID_CPU_CHIP_CLOVERVIEW,
+ INTEL_MID_CPU_CHIP_TANGIER,
};

extern enum intel_mid_cpu_type __intel_mid_cpu_chip;
@@ -82,6 +83,7 @@ struct intel_mid_ops {
#define INTEL_MID_OPS_INIT {\
DECLARE_INTEL_MID_OPS_INIT(penwell, INTEL_MID_CPU_CHIP_PENWELL), \
DECLARE_INTEL_MID_OPS_INIT(cloverview, INTEL_MID_CPU_CHIP_CLOVERVIEW), \
+ DECLARE_INTEL_MID_OPS_INIT(tangier, INTEL_MID_CPU_CHIP_TANGIER) \
};

#ifdef CONFIG_X86_INTEL_MID
diff --git a/arch/x86/pci/intel_mid_pci.c b/arch/x86/pci/intel_mid_pci.c
index 51384ca727ad..84b9d672843d 100644
--- a/arch/x86/pci/intel_mid_pci.c
+++ b/arch/x86/pci/intel_mid_pci.c
@@ -31,6 +31,7 @@
#include <asm/pci_x86.h>
#include <asm/hw_irq.h>
#include <asm/io_apic.h>
+#include <asm/intel-mid.h>

#define PCIE_CAP_OFFSET 0x100

@@ -219,7 +220,10 @@ static int intel_mid_pci_irq_enable(struct pci_dev *dev)
irq_attr.ioapic = mp_find_ioapic(dev->irq);
irq_attr.ioapic_pin = dev->irq;
irq_attr.trigger = 1; /* level */
- irq_attr.polarity = 1; /* active low */
+ if (intel_mid_identify_cpu() == INTEL_MID_CPU_CHIP_TANGIER)
+ irq_attr.polarity = 0; /* active high */
+ else
+ irq_attr.polarity = 1; /* active low */
io_apic_set_pci_routing(&dev->dev, dev->irq, &irq_attr);

return 0;
diff --git a/arch/x86/platform/intel-mid/Makefile b/arch/x86/platform/intel-mid/Makefile
index 78a14ba0e0db..0a8ee703b9fa 100644
--- a/arch/x86/platform/intel-mid/Makefile
+++ b/arch/x86/platform/intel-mid/Makefile
@@ -1,4 +1,4 @@
-obj-$(CONFIG_X86_INTEL_MID) += intel-mid.o intel_mid_vrtc.o mfld.o
+obj-$(CONFIG_X86_INTEL_MID) += intel-mid.o intel_mid_vrtc.o mfld.o mrfl.o
obj-$(CONFIG_EARLY_PRINTK_INTEL_MID) += early_printk_intel_mid.o

# SFI specific code
diff --git a/arch/x86/platform/intel-mid/intel-mid.c b/arch/x86/platform/intel-mid/intel-mid.c
index 40955841bb32..1bbedc4b0f88 100644
--- a/arch/x86/platform/intel-mid/intel-mid.c
+++ b/arch/x86/platform/intel-mid/intel-mid.c
@@ -116,6 +116,10 @@ static void intel_mid_arch_setup(void)
case 0x35:
__intel_mid_cpu_chip = INTEL_MID_CPU_CHIP_CLOVERVIEW;
break;
+ case 0x3C:
+ case 0x4A:
+ __intel_mid_cpu_chip = INTEL_MID_CPU_CHIP_TANGIER;
+ break;
case 0x27:
default:
__intel_mid_cpu_chip = INTEL_MID_CPU_CHIP_PENWELL;
diff --git a/arch/x86/platform/intel-mid/intel_mid_weak_decls.h b/arch/x86/platform/intel-mid/intel_mid_weak_decls.h
index 9ebce0447edf..a537ffc16299 100644
--- a/arch/x86/platform/intel-mid/intel_mid_weak_decls.h
+++ b/arch/x86/platform/intel-mid/intel_mid_weak_decls.h
@@ -16,3 +16,4 @@
*/
extern void * __cpuinit get_penwell_ops(void) __attribute__((weak));
extern void * __cpuinit get_cloverview_ops(void) __attribute__((weak));
+extern void * __init get_tangier_ops(void) __attribute__((weak));
diff --git a/arch/x86/platform/intel-mid/mrfl.c b/arch/x86/platform/intel-mid/mrfl.c
new file mode 100644
index 000000000000..09d10159e7b7
--- /dev/null
+++ b/arch/x86/platform/intel-mid/mrfl.c
@@ -0,0 +1,103 @@
+/*
+ * mrfl.c: Intel Merrifield platform specific setup code
+ *
+ * (C) Copyright 2013 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+
+#include <linux/init.h>
+
+#include <asm/apic.h>
+#include <asm/intel-mid.h>
+
+#include "intel_mid_weak_decls.h"
+
+static unsigned long __init tangier_calibrate_tsc(void)
+{
+ unsigned long fast_calibrate;
+ u32 lo, hi, ratio, fsb, bus_freq;
+
+ /* *********************** */
+ /* Compute TSC:Ratio * FSB */
+ /* *********************** */
+
+ /* Compute Ratio */
+ rdmsr(MSR_PLATFORM_INFO, lo, hi);
+ pr_debug("IA32 PLATFORM_INFO is 0x%x : %x\n", hi, lo);
+
+ ratio = (lo >> 8) & 0xFF;
+ pr_debug("ratio is %d\n", ratio);
+ if (!ratio) {
+ pr_err("Read a zero ratio, force tsc ratio to 4 ...\n");
+ ratio = 4;
+ }
+
+ /* Compute FSB */
+ rdmsr(MSR_FSB_FREQ, lo, hi);
+ pr_debug("Actual FSB frequency detected by SOC 0x%x : %x\n",
+ hi, lo);
+
+ bus_freq = lo & 0x7;
+ pr_debug("bus_freq = 0x%x\n", bus_freq);
+
+ if (bus_freq == 0)
+ fsb = FSB_FREQ_100SKU;
+ else if (bus_freq == 1)
+ fsb = FSB_FREQ_100SKU;
+ else if (bus_freq == 2)
+ fsb = FSB_FREQ_133SKU;
+ else if (bus_freq == 3)
+ fsb = FSB_FREQ_167SKU;
+ else if (bus_freq == 4)
+ fsb = FSB_FREQ_83SKU;
+ else if (bus_freq == 5)
+ fsb = FSB_FREQ_400SKU;
+ else if (bus_freq == 6)
+ fsb = FSB_FREQ_267SKU;
+ else if (bus_freq == 7)
+ fsb = FSB_FREQ_333SKU;
+ else {
+ BUG();
+ pr_err("Invalid bus_freq! Setting to minimal value!\n");
+ fsb = FSB_FREQ_100SKU;
+ }
+
+ /* TSC = FSB Freq * Resolved HFM Ratio */
+ fast_calibrate = ratio * fsb;
+ pr_debug("calculate tangier tsc %lu KHz\n", fast_calibrate);
+
+ /* ************************************ */
+ /* Calculate Local APIC Timer Frequency */
+ /* ************************************ */
+ lapic_timer_frequency = (fsb * 1000) / HZ;
+
+ pr_debug("Setting lapic_timer_frequency = %d\n",
+ lapic_timer_frequency);
+
+ /* mark tsc clocksource as reliable */
+ set_cpu_cap(&boot_cpu_data, X86_FEATURE_TSC_RELIABLE);
+
+ if (fast_calibrate)
+ return fast_calibrate;
+
+ return 0;
+}
+
+static void __init tangier_arch_setup(void)
+{
+ x86_platform.calibrate_tsc = tangier_calibrate_tsc;
+}
+
+/* tangier arch ops */
+static struct intel_mid_ops tangier_ops = {
+ .arch_setup = tangier_arch_setup,
+};
+
+void * __cpuinit get_tangier_ops()
+{
+ return &tangier_ops;
+}
diff --git a/arch/x86/platform/intel-mid/sfi.c b/arch/x86/platform/intel-mid/sfi.c
index c84c1ca396bf..80a52288555c 100644
--- a/arch/x86/platform/intel-mid/sfi.c
+++ b/arch/x86/platform/intel-mid/sfi.c
@@ -443,13 +443,35 @@ static int __init sfi_parse_devs(struct sfi_table_header *table)
* so we have to enable them one by one here
*/
ioapic = mp_find_ioapic(irq);
- irq_attr.ioapic = ioapic;
- irq_attr.ioapic_pin = irq;
- irq_attr.trigger = 1;
- irq_attr.polarity = 1;
- io_apic_set_pci_routing(NULL, irq, &irq_attr);
- } else
+ if (ioapic >= 0) {
+ irq_attr.ioapic = ioapic;
+ irq_attr.ioapic_pin = irq;
+ irq_attr.trigger = 1;
+ if (intel_mid_identify_cpu() ==
+ INTEL_MID_CPU_CHIP_TANGIER) {
+ if (!strncmp(pentry->name,
+ "r69001-ts-i2c", 13))
+ /* active low */
+ irq_attr.polarity = 1;
+ else if (!strncmp(pentry->name,
+ "synaptics_3202", 14))
+ /* active low */
+ irq_attr.polarity = 1;
+ else if (irq == 41)
+ /* fast_int_1 */
+ irq_attr.polarity = 1;
+ else
+ /* active high */
+ irq_attr.polarity = 0;
+ } else {
+ /* PNW and CLV go with active low */
+ irq_attr.polarity = 1;
+ }
+ io_apic_set_pci_routing(NULL, irq, &irq_attr);
+ }
+ } else {
irq = 0; /* No irq */
+ }

dev = get_device_id(pentry->type, pentry->name);

--
1.8.4.2

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/