RE: [PATCH v4 5/9] usb: s3c-hsotg: Use the new Exynos USB phy driverwith the generic phy framework

From: Kamil Debski
Date: Tue Dec 17 2013 - 04:42:12 EST


Hi Matt,

I am afraid it is not possible. This patch cannot go in without the
new phy driver. It would break Exynos USB functionality. This
is because it changes s3c-hsotg to use the new phy driver.

I am working on an updated patch series addressing all the comments.
time permitting I want to post an alternative version - integrating
as much as possible in a single file. This way it would be possible
to have a hands-on comparison of the two approaches we were
discussing with Kishon.

I estimate that I post it this week.

Best wishes,
--
Kamil Debski
Samsung R&D Institute Poland


> -----Original Message-----
> From: Matt Porter [mailto:mporter@xxxxxxxxxx]
> Sent: Monday, December 16, 2013 10:40 PM
> To: Kamil Debski
> Cc: linux-kernel@xxxxxxxxxxxxxxx; linux-samsung-soc@xxxxxxxxxxxxxxx;
> linux-usb@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx;
> kyungmin.park@xxxxxxxxxxx; kishon@xxxxxx; t.figa@xxxxxxxxxxx;
> s.nawrocki@xxxxxxxxxxx; m.szyprowski@xxxxxxxxxxx;
> gautam.vivek@xxxxxxxxxxx; mat.krawczuk@xxxxxxxxx;
> yulgon.kim@xxxxxxxxxxx; p.paneri@xxxxxxxxxxx; av.tikhomirov@xxxxxxxxxxx;
> jg1.han@xxxxxxxxxxx; galak@xxxxxxxxxxxxxx; Felipe Balbi
> Subject: Re: [PATCH v4 5/9] usb: s3c-hsotg: Use the new Exynos USB phy
> driver with the generic phy framework
>
> On Thu, Dec 05, 2013 at 01:29:35PM +0100, Kamil Debski wrote:
> > Change the used phy driver to the new Exynos USB phy driver that uses
> > the generic phy framework.
> >
> > Signed-off-by: Kamil Debski <k.debski@xxxxxxxxxxx>
> > Signed-off-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
> > ---
> > .../devicetree/bindings/usb/samsung-hsotg.txt | 4 ++++
> > drivers/usb/gadget/s3c-hsotg.c | 11 ++++++----
> -
> > 2 files changed, 10 insertions(+), 5 deletions(-)
>
> Kamil,
>
> Can we separate this patch out of this series? My bcm281xx series is
> ready to go except for this dependency. Felipe has noted that there's
> only a week until he locks his tree down for 3.14 [1]. I'm willing to
> update this versus the comment Kishon made on fixing the example if you
> don't have time before then. Let me know.
>
> [1] https://lkml.org/lkml/2013/12/16/555
>
> Thanks,
> Matt
>
> > diff --git a/Documentation/devicetree/bindings/usb/samsung-hsotg.txt
> > b/Documentation/devicetree/bindings/usb/samsung-hsotg.txt
> > index b83d428..9340d06 100644
> > --- a/Documentation/devicetree/bindings/usb/samsung-hsotg.txt
> > +++ b/Documentation/devicetree/bindings/usb/samsung-hsotg.txt
> > @@ -24,6 +24,8 @@ Required properties:
> > - first entry: must be "otg"
> > - vusb_d-supply: phandle to voltage regulator of digital section,
> > - vusb_a-supply: phandle to voltage regulator of analog section.
> > +- phys: from general PHY binding: phandle to the PHY device
> > +- phy-names: from general PHY binding: should be "usb2-phy"
> >
> > Example
> > -----
> > @@ -36,5 +38,7 @@ Example
> > clock-names = "otg";
> > vusb_d-supply = <&vusb_reg>;
> > vusb_a-supply = <&vusbdac_reg>;
> > + phys = <&usb2phy 0>;
> > + phy-names = "device";
> > };
> >
> > diff --git a/drivers/usb/gadget/s3c-hsotg.c
> > b/drivers/usb/gadget/s3c-hsotg.c index eccb147..db096fd 100644
> > --- a/drivers/usb/gadget/s3c-hsotg.c
> > +++ b/drivers/usb/gadget/s3c-hsotg.c
> > @@ -31,6 +31,7 @@
> > #include <linux/regulator/consumer.h> #include <linux/of.h>
> > #include <linux/of_platform.h>
> > +#include <linux/phy/phy.h>
> >
> > #include <linux/usb/ch9.h>
> > #include <linux/usb/gadget.h>
> > @@ -162,7 +163,7 @@ struct s3c_hsotg_ep { struct s3c_hsotg {
> > struct device *dev;
> > struct usb_gadget_driver *driver;
> > - struct usb_phy *phy;
> > + struct phy *phy;
> > struct s3c_hsotg_plat *plat;
> >
> > spinlock_t lock;
> > @@ -2905,7 +2906,7 @@ static void s3c_hsotg_phy_enable(struct
> s3c_hsotg *hsotg)
> > dev_dbg(hsotg->dev, "pdev 0x%p\n", pdev);
> >
> > if (hsotg->phy)
> > - usb_phy_init(hsotg->phy);
> > + phy_power_on(hsotg->phy);
> > else if (hsotg->plat->phy_init)
> > hsotg->plat->phy_init(pdev, hsotg->plat->phy_type); } @@ -
> 2922,7
> > +2923,7 @@ static void s3c_hsotg_phy_disable(struct s3c_hsotg *hsotg)
> > struct platform_device *pdev = to_platform_device(hsotg->dev);
> >
> > if (hsotg->phy)
> > - usb_phy_shutdown(hsotg->phy);
> > + phy_power_off(hsotg->phy);
> > else if (hsotg->plat->phy_exit)
> > hsotg->plat->phy_exit(pdev, hsotg->plat->phy_type); } @@ -
> 3529,7
> > +3530,7 @@ static void s3c_hsotg_delete_debug(struct s3c_hsotg *hsotg)
> > static int s3c_hsotg_probe(struct platform_device *pdev) {
> > struct s3c_hsotg_plat *plat = dev_get_platdata(&pdev->dev);
> > - struct usb_phy *phy;
> > + struct phy *phy;
> > struct device *dev = &pdev->dev;
> > struct s3c_hsotg_ep *eps;
> > struct s3c_hsotg *hsotg;
> > @@ -3544,7 +3545,7 @@ static int s3c_hsotg_probe(struct
> platform_device *pdev)
> > return -ENOMEM;
> > }
> >
> > - phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
> > + phy = devm_phy_get(&pdev->dev, "usb2-phy");
> > if (IS_ERR(phy)) {
> > /* Fallback for pdata */
> > plat = dev_get_platdata(&pdev->dev);
> > --
> > 1.7.9.5
> >

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/