Re: [PATCHv7 1/4] pwm: Add Freescale FTM PWM driver support

[Tomasz Figa]

On Tuesday 17 of December 2013 13:45:06 Thierry Reding wrote:
> On Tue, Dec 17, 2013 at 01:00:10PM +0100, Tomasz Figa wrote:
> > On Tuesday 17 of December 2013 11:51:36 Russell King - ARM Linux wrote:
> > > On Tue, Dec 17, 2013 at 12:10:22PM +0100, Thierry Reding wrote:
> > > > On Fri, Dec 13, 2013 at 04:57:04PM +0800, Xiubo Li wrote:
> > > > > +static inline u32 fsl_pwm_readl(struct fsl_pwm_chip *fpc,
> > > > > +		const void __iomem *addr)
> > > > > +{
> > > > > +	u32 val;
> > > > > +
> > > > > +	val = __raw_readl(addr);
> > > > > +
> > > > > +	if (likely(fpc->big_endian))
> > > > 
> > > > The likely() probably isn't very useful in this case. But if you want to
> > > > keep it, it should at least be reversed, since little-endian is actually
> > > > the default (you have to specify the big-endian property to activate the
> > > > big endian mode).
> > > > 
> > > > > +		val = be32_to_cpu(val);
> > > > > +	else
> > > > > +		val = le32_to_cpu(val);
> > > 
> > > This will also cause sparse errors, because when sparse is enabled, these
> > > expect __le32 or __be32 arguments, not u32.
> > 
> > My question is why can't you just create two sets of accessors, one big
> > endian and one little endian, add two function pointers to your
> > fsl_pwm_chip struct and let the driver set the to correct accessors in
> > probe?
> 
> I guess that would be one possibility.
> 
> > This would eliminate the problem with types Russell mentioned and IMHO
> > make the code cleaner.
> 
> I fail to see how that would eliminate the problem with the types. That
> said I don't actually see sparse complaining about any type mismatches.
> That's probably because the various macros implicitly cast to u32.

Well, in BE variant you would read the register using __raw_readl() into
a __be32 and then get an u32 from be32_to_cpu() and return it. Similarly
for writes

In LE variant, readl()/writel() could be used directly.

> 
> > > > > +	rmb();
> > > > 
> > > > I'd prefer the rmb() to follow the __raw_readl() immediately to make the
> > > > relationship more explicit.
> > > 
> > > A better question to ask is: why is this barrier here?  What memory
> > > ordering operations is it trying to serialise?
> > 
> > I'd also add a question why __raw accessors are used here.
> 
> Because both readl() and writel() explicitly perform little endian
> accesses.

Right. Thanks for pointing this out.

Best regards,
Tomasz

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/