[PATCH v3 5/8] pciehp: Don't check for adapter or latch status whiledisabling

[Rajat Jain]

It does not make much sense to refuse to disable a slot if an
adapter is not present or the latch is open. If an adapter is not
present, it provides an even better reason to disable the device
slot.

This is specially a problem for link state hot-plug, because some
ports use in band mechanism for presence detection. Thus
when link goes down, presence detect also goes down. We _want_ that
the removal should take place in such case.

Thus remove the checks for adapter and latch in pciehp_disable_slot()

Signed-off-by: Rajat Jain <rajatjain@xxxxxxxxxxx>
Signed-off-by: Guenter Roeck <groeck@xxxxxxxxxxx>
---
v3: * created by splitting the patch v2 [2/4]
    * Remove the check for latch as well
v2: (non existent)
v1: (non existent)

 drivers/pci/hotplug/pciehp_ctrl.c |   18 ------------------
 1 file changed, 18 deletions(-)

diff --git a/drivers/pci/hotplug/pciehp_ctrl.c b/drivers/pci/hotplug/pciehp_ctrl.c
index 7ae7b02..e934618 100644
--- a/drivers/pci/hotplug/pciehp_ctrl.c
+++ b/drivers/pci/hotplug/pciehp_ctrl.c
@@ -612,24 +612,6 @@ int pciehp_disable_slot(struct slot *p_slot)
 	if (!p_slot->ctrl)
 		return 1;
 
-	if (!HP_SUPR_RM(p_slot->ctrl)) {
-		ret = pciehp_get_adapter_status(p_slot, &getstatus);
-		if (ret || !getstatus) {
-			ctrl_info(ctrl, "No adapter on slot(%s)\n",
-				  slot_name(p_slot));
-			return -ENODEV;
-		}
-	}
-
-	if (MRL_SENS(p_slot->ctrl)) {
-		ret = pciehp_get_latch_status(p_slot, &getstatus);
-		if (ret || getstatus) {
-			ctrl_info(ctrl, "Latch open on slot(%s)\n",
-				  slot_name(p_slot));
-			return -ENODEV;
-		}
-	}
-
 	if (POWER_CTRL(p_slot->ctrl)) {
 		ret = pciehp_get_power_status(p_slot, &getstatus);
 		if (ret || !getstatus) {
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/