[PATCH v2 3/3] usb: musb: fix setting JZ4740 gadget periphal mode on reset

[Apelete Seketeli]

JZ4740 USB Device Controller is not OTG compatible and does not have
DEVCTL register in silicon.

During ethernet-over-usb transactions, on reset, musb driver tries to
read from DEVCTL and consequently sets device as host (A-Device)
instead of peripheral (B-Device), which makes it a composite device to
the USB gadget driver.
This induces a kernel panic during power down where the USB gadget
driver does a null pointer dereference when trying to access the
composite device configuration.

On reset, do not rely on DEVCTL value for setting gadget peripheral
mode. Use is_otg flag instead to set it to B-Device.

Signed-off-by: Apelete Seketeli <apelete@xxxxxxxxxxxx>
---
 drivers/usb/musb/musb_gadget.c |   10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index 32fb057..cb50163 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -2119,7 +2119,15 @@ __acquires(musb->lock)
 	/* Normal reset, as B-Device;
 	 * or else after HNP, as A-Device
 	 */
-	if (devctl & MUSB_DEVCTL_BDEVICE) {
+	if (!musb->g.is_otg) {
+		/* USB device controllers that are not OTG compatible
+		 * may not have DEVCTL register in silicon.
+		 * In that case, do not rely on devctl for setting
+		 * peripheral mode.
+		 */
+		musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
+		musb->g.is_a_peripheral = 0;
+	} else if (devctl & MUSB_DEVCTL_BDEVICE) {
 		musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
 		musb->g.is_a_peripheral = 0;
 	} else {
-- 
1.7.10.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/