Re: [PATCH v4 9/9] PCI/MSI: Introduce pci_auto_enable_msi*() familyhelpers
From: Alexander Gordeev
Date: Wed Dec 18 2013 - 08:22:03 EST
On Tue, Dec 17, 2013 at 05:30:02PM -0700, Bjorn Helgaas wrote:
Hi Bjorn,
Thank you for the review!
Sorry for a heavy skipping - I just wanted to focus on a principal
moment in your suggestion and then go on with the original note.
> I only see five users of pci_enable_msi_block() (nvme, ath10k, wil6210,
> ipr, vfio); we can easily convert those to use pci_enable_msi_range() and
> then remove pci_enable_msi_block().
> It would be good if pci_enable_msix() could be implemented in terms of
> pci_enable_msix_range(nvec, nvec), with a little extra glue to handle the
> positive return values.
So you want to get rid of the tri-state "low-level" pci_enable_msi_block()
and pci_enable_msix(), right? I believe we can not do this, since we need
to support a non-standard hardware which (a) can not be asked any arbitrary
number of vectors within a range and (b) needs extra magic to enable MSI
operation.
I.e. below is a snippet from a real device driver Mark Lord has sent in a
previous conversation:
xx_disable_all_irqs(dev);
do {
if (nvec < 2)
xx_prep_for_1_msix_vector(dev);
else if (nvec < 4)
xx_prep_for_2_msix_vectors(dev);
else if (nvec < 8)
xx_prep_for_4_msix_vectors(dev);
else if (nvec < 16)
xx_prep_for_8_msix_vectors(dev);
else
xx_prep_for_16_msix_vectors(dev);
nvec = pci_enable_msix(dev->pdev, dev->irqs, dev->num_vectors);
} while (nvec > 0);
The same probably could have been done with pci_enable_msix_range(nvec, nvec)
call and checking for -ENOSPC errno, but IMO it would be less graceful and
reliable, since -ENOSPC might come from anywhere.
IOW, I believe we need to keep the door open for custom MSI-enablement (loop)
implementations.
--
Regards,
Alexander Gordeev
agordeev@xxxxxxxxxx
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/