Re: [PATCH 5/9] Input: pixcir_i2c_ts: Get rid of pdata->attb_read_val()

[Roger Quadros]

On 12/18/2013 07:50 PM, Dmitry Torokhov wrote:
> On Wed, Dec 18, 2013 at 02:51:16PM +0530, Roger Quadros wrote:
>> Get rid of the attb_read_val() platform hook. Instead,
>> read the ATTB gpio directly from the driver.
>>
>> Fail if valid ATTB gpio is not provided by patform data.
> 
> Do you also need to define polarity?
> 

In patch 3, in pixcir_start(), we explicitly configure the GPIO output
polarity as /* LEVEL_TOUCH interrupt with active low polarity */

So I don't think we need to define polarity.

cheers,
-roger

>>
>> Signed-off-by: Roger Quadros <rogerq@xxxxxx>
>> Acked-by: Mugunthan V N <mugunthanvnm@xxxxxx>
>> ---
>>  drivers/input/touchscreen/pixcir_i2c_ts.c | 19 +++++++++++++++++--
>>  include/linux/input/pixcir_ts.h           |  1 -
>>  2 files changed, 17 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/input/touchscreen/pixcir_i2c_ts.c b/drivers/input/touchscreen/pixcir_i2c_ts.c
>> index 3370fd9..a783d94 100644
>> --- a/drivers/input/touchscreen/pixcir_i2c_ts.c
>> +++ b/drivers/input/touchscreen/pixcir_i2c_ts.c
>> @@ -91,11 +91,12 @@ static void pixcir_ts_poscheck(struct pixcir_i2c_ts_data *data)
>>  static irqreturn_t pixcir_ts_isr(int irq, void *dev_id)
>>  {
>>  	struct pixcir_i2c_ts_data *tsdata = dev_id;
>> +	const struct pixcir_ts_platform_data *pdata = tsdata->chip;
>>  
>>  	while (!tsdata->exiting) {
>>  		pixcir_ts_poscheck(tsdata);
>>  
>> -		if (tsdata->chip->attb_read_val())
>> +		if (gpio_get_value(pdata->gpio_attb))
>>  			break;
>>  
>>  		msleep(20);
>> @@ -301,8 +302,10 @@ static struct pixcir_ts_platform_data *pixcir_parse_dt(struct device *dev)
>>  		return ERR_PTR(-ENOMEM);
>>  
>>  	pdata->gpio_attb = of_get_named_gpio(np, "attb-gpio", 0);
>> -	if (!gpio_is_valid(pdata->gpio_attb))
>> +	if (!gpio_is_valid(pdata->gpio_attb)) {
>>  		dev_err(dev, "Failed to get ATTB GPIO\n");
>> +		return ERR_PTR(-EINVAL);
>> +	}
>>  
>>  	if (of_property_read_u32(np, "x-size", &pdata->x_size)) {
>>  		dev_err(dev, "Failed to get x-size property\n");
>> @@ -344,6 +347,11 @@ static int pixcir_i2c_ts_probe(struct i2c_client *client,
>>  	} else if (!pdata) {
>>  		dev_err(&client->dev, "platform data not defined\n");
>>  		return -EINVAL;
>> +	} else {
>> +		if (!gpio_is_valid(pdata->gpio_attb)) {
>> +			dev_err(dev, "Invalid gpio_attb in pdata\n");
>> +			return -EINVAL;
>> +		}
>>  	}
>>  
>>  	tsdata = devm_kzalloc(dev, sizeof(*tsdata), GFP_KERNEL);
>> @@ -380,6 +388,13 @@ static int pixcir_i2c_ts_probe(struct i2c_client *client,
>>  
>>  	input_set_drvdata(input, tsdata);
>>  
>> +	error = devm_gpio_request_one(dev, pdata->gpio_attb,
>> +			GPIOF_DIR_IN, "pixcir_i2c_attb");
>> +	if (error) {
>> +		dev_err(dev, "Failed to request ATTB gpio\n");
>> +		return error;
>> +	}
>> +
>>  	error = devm_request_threaded_irq(dev, client->irq, NULL, pixcir_ts_isr,
>>  				     IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
>>  				     client->name, tsdata);
>> diff --git a/include/linux/input/pixcir_ts.h b/include/linux/input/pixcir_ts.h
>> index f17c192..88ffdb50 100644
>> --- a/include/linux/input/pixcir_ts.h
>> +++ b/include/linux/input/pixcir_ts.h
>> @@ -44,7 +44,6 @@ enum pixcir_int_mode {
>>  #define PIXCIR_INT_POL_HIGH	(1UL << 2)
>>  
>>  struct pixcir_ts_platform_data {
>> -	int (*attb_read_val)(void);
>>  	unsigned int x_size;	/* X axis resolution */
>>  	unsigned int y_size;	/* Y axis resolution */
>>  	int gpio_attb;		/* GPIO connected to ATTB line */
>> -- 
>> 1.8.3.2
>>
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/