[PATCH v12 1/4] thermal: samsung: replace inten_ bit fields withintclr_

From: Naveen Krishna Chatradhi
Date: Thu Dec 19 2013 - 01:05:10 EST

Next message: Naveen Krishna Chatradhi: "[PATCH v12 2/4] thermal: samsung: change base_common to moremeaningful base_second"
Previous message: Jiang Liu: "[RFC PATCH] ixgbe: acquire RCU read lock when calling netdev_for_each_all_upper_dev_rcu()"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

This patch replaces the inten_rise_shift/mask and inten_fall_shift/mask
with intclr_rise_shift/mask and intclr_fall_shift/mask respectively.
Currently, inten_rise_shift/mask and inten_fall_shift/mask bits are only used
to configure intclr related registers.

Description of H/W:
The offset for the bits in the CLEAR register are not consistent across TMU
modules in Exynso5250, 5420 and 5440.

On Exynos5250, the FALL interrupt related en, status and clear bits are
available at an offset of
16 in INTEN, INTSTAT registers and at an offset of
12 in INTCLEAR register.

On Exynos5420, the FALL interrupt related en, status and clear bits are
available at an offset of
16 in INTEN, INTSTAT and INTCLEAR registers.

On Exynos5440,
the FALL_IRQEN bits are at an offset of 4
and the RISE_IRQEN bits are at an offset of 0

Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@xxxxxxxxxxx>
Acked-by: Amit Daniel Kachhap <amit.daniel@xxxxxxxxxxx>
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
Reviewed-by: Tomasz Figa <t.figa@xxxxxxxxxxx>
---
Changes since v11:
Added Reviewed by Tomasz

Changes since v10:
None

drivers/thermal/samsung/exynos_tmu.c | 6 +++---
drivers/thermal/samsung/exynos_tmu.h | 16 ++++++++--------
drivers/thermal/samsung/exynos_tmu_data.c | 18 +++++++++---------
drivers/thermal/samsung/exynos_tmu_data.h | 4 ++--
4 files changed, 22 insertions(+), 22 deletions(-)

diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
index 32f38b9..c493245 100644
--- a/drivers/thermal/samsung/exynos_tmu.c
+++ b/drivers/thermal/samsung/exynos_tmu.c
@@ -237,7 +237,7 @@ skip_calib_data:
writeb(pdata->trigger_levels[i], data->base +
reg->threshold_th0 + i * sizeof(reg->threshold_th0));

- writel(reg->inten_rise_mask, data->base + reg->tmu_intclear);
+ writel(reg->intclr_rise_mask, data->base + reg->tmu_intclear);
} else {
/* Write temperature code for rising and falling threshold */
for (i = 0;
@@ -264,8 +264,8 @@ skip_calib_data:
writel(falling_threshold,
data->base + reg->threshold_th1);

- writel((reg->inten_rise_mask << reg->inten_rise_shift) |
- (reg->inten_fall_mask << reg->inten_fall_shift),
+ writel((reg->intclr_rise_mask << reg->intclr_rise_shift) |
+ (reg->intclr_fall_mask << reg->intclr_fall_shift),
data->base + reg->tmu_intclear);

/* if last threshold limit is also present */
diff --git a/drivers/thermal/samsung/exynos_tmu.h b/drivers/thermal/samsung/exynos_tmu.h
index 3fb6554..980859a 100644
--- a/drivers/thermal/samsung/exynos_tmu.h
+++ b/drivers/thermal/samsung/exynos_tmu.h
@@ -122,10 +122,6 @@ enum soc_type {
* @threshold_th3_l0_shift: shift bits of level0 threshold temperature.
* @tmu_inten: register containing the different threshold interrupt
enable bits.
- * @inten_rise_shift: shift bits of all rising interrupt bits.
- * @inten_rise_mask: mask bits of all rising interrupt bits.
- * @inten_fall_shift: shift bits of all rising interrupt bits.
- * @inten_fall_mask: mask bits of all rising interrupt bits.
* @inten_rise0_shift: shift bits of rising 0 interrupt bits.
* @inten_rise1_shift: shift bits of rising 1 interrupt bits.
* @inten_rise2_shift: shift bits of rising 2 interrupt bits.
@@ -136,6 +132,10 @@ enum soc_type {
* @inten_fall3_shift: shift bits of falling 3 interrupt bits.
* @tmu_intstat: Register containing the interrupt status values.
* @tmu_intclear: Register for clearing the raised interrupt status.
+ * @intclr_fall_shift: shift bits for interrupt clear fall 0
+ * @intclr_rise_shift: shift bits of all rising interrupt bits.
+ * @intclr_rise_mask: mask bits of all rising interrupt bits.
+ * @intclr_fall_mask: mask bits of all rising interrupt bits.
* @emul_con: TMU emulation controller register.
* @emul_temp_shift: shift bits of emulation temperature.
* @emul_time_shift: shift bits of emulation time.
@@ -191,10 +191,6 @@ struct exynos_tmu_registers {
u32 threshold_th3_l0_shift;

u32 tmu_inten;
- u32 inten_rise_shift;
- u32 inten_rise_mask;
- u32 inten_fall_shift;
- u32 inten_fall_mask;
u32 inten_rise0_shift;
u32 inten_rise1_shift;
u32 inten_rise2_shift;
@@ -207,6 +203,10 @@ struct exynos_tmu_registers {
u32 tmu_intstat;

u32 tmu_intclear;
+ u32 intclr_fall_shift;
+ u32 intclr_rise_shift;
+ u32 intclr_fall_mask;
+ u32 intclr_rise_mask;

u32 emul_con;
u32 emul_temp_shift;
diff --git a/drivers/thermal/samsung/exynos_tmu_data.c b/drivers/thermal/samsung/exynos_tmu_data.c
index 073c292..7cdb04e 100644
--- a/drivers/thermal/samsung/exynos_tmu_data.c
+++ b/drivers/thermal/samsung/exynos_tmu_data.c
@@ -40,13 +40,13 @@ static const struct exynos_tmu_registers exynos4210_tmu_registers = {
.threshold_temp = EXYNOS4210_TMU_REG_THRESHOLD_TEMP,
.threshold_th0 = EXYNOS4210_TMU_REG_TRIG_LEVEL0,
.tmu_inten = EXYNOS_TMU_REG_INTEN,
- .inten_rise_mask = EXYNOS4210_TMU_TRIG_LEVEL_MASK,
.inten_rise0_shift = EXYNOS_TMU_INTEN_RISE0_SHIFT,
.inten_rise1_shift = EXYNOS_TMU_INTEN_RISE1_SHIFT,
.inten_rise2_shift = EXYNOS_TMU_INTEN_RISE2_SHIFT,
.inten_rise3_shift = EXYNOS_TMU_INTEN_RISE3_SHIFT,
.tmu_intstat = EXYNOS_TMU_REG_INTSTAT,
.tmu_intclear = EXYNOS_TMU_REG_INTCLEAR,
+ .intclr_rise_mask = EXYNOS4210_TMU_TRIG_LEVEL_MASK,
};

struct exynos_tmu_init_data const exynos4210_default_tmu_data = {
@@ -112,10 +112,6 @@ static const struct exynos_tmu_registers exynos4412_tmu_registers = {
.threshold_th0 = EXYNOS_THD_TEMP_RISE,
.threshold_th1 = EXYNOS_THD_TEMP_FALL,
.tmu_inten = EXYNOS_TMU_REG_INTEN,
- .inten_rise_mask = EXYNOS_TMU_RISE_INT_MASK,
- .inten_rise_shift = EXYNOS_TMU_RISE_INT_SHIFT,
- .inten_fall_mask = EXYNOS_TMU_FALL_INT_MASK,
- .inten_fall_shift = EXYNOS_TMU_FALL_INT_SHIFT,
.inten_rise0_shift = EXYNOS_TMU_INTEN_RISE0_SHIFT,
.inten_rise1_shift = EXYNOS_TMU_INTEN_RISE1_SHIFT,
.inten_rise2_shift = EXYNOS_TMU_INTEN_RISE2_SHIFT,
@@ -123,6 +119,10 @@ static const struct exynos_tmu_registers exynos4412_tmu_registers = {
.inten_fall0_shift = EXYNOS_TMU_INTEN_FALL0_SHIFT,
.tmu_intstat = EXYNOS_TMU_REG_INTSTAT,
.tmu_intclear = EXYNOS_TMU_REG_INTCLEAR,
+ .intclr_fall_shift = EXYNOS_TMU_CLEAR_FALL_INT_SHIFT,
+ .intclr_rise_shift = EXYNOS_TMU_RISE_INT_SHIFT,
+ .intclr_rise_mask = EXYNOS_TMU_RISE_INT_MASK,
+ .intclr_fall_mask = EXYNOS_TMU_FALL_INT_MASK,
.emul_con = EXYNOS_EMUL_CON,
.emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT,
.emul_time_shift = EXYNOS_EMUL_TIME_SHIFT,
@@ -217,10 +217,6 @@ static const struct exynos_tmu_registers exynos5440_tmu_registers = {
.threshold_th2 = EXYNOS5440_TMU_S0_7_TH2,
.threshold_th3_l0_shift = EXYNOS5440_TMU_TH_RISE4_SHIFT,
.tmu_inten = EXYNOS5440_TMU_S0_7_IRQEN,
- .inten_rise_mask = EXYNOS5440_TMU_RISE_INT_MASK,
- .inten_rise_shift = EXYNOS5440_TMU_RISE_INT_SHIFT,
- .inten_fall_mask = EXYNOS5440_TMU_FALL_INT_MASK,
- .inten_fall_shift = EXYNOS5440_TMU_FALL_INT_SHIFT,
.inten_rise0_shift = EXYNOS5440_TMU_INTEN_RISE0_SHIFT,
.inten_rise1_shift = EXYNOS5440_TMU_INTEN_RISE1_SHIFT,
.inten_rise2_shift = EXYNOS5440_TMU_INTEN_RISE2_SHIFT,
@@ -228,6 +224,10 @@ static const struct exynos_tmu_registers exynos5440_tmu_registers = {
.inten_fall0_shift = EXYNOS5440_TMU_INTEN_FALL0_SHIFT,
.tmu_intstat = EXYNOS5440_TMU_S0_7_IRQ,
.tmu_intclear = EXYNOS5440_TMU_S0_7_IRQ,
+ .intclr_fall_shift = EXYNOS5440_TMU_CLEAR_FALL_INT_SHIFT,
+ .intclr_rise_shift = EXYNOS5440_TMU_RISE_INT_SHIFT,
+ .intclr_rise_mask = EXYNOS5440_TMU_RISE_INT_MASK,
+ .intclr_fall_mask = EXYNOS5440_TMU_FALL_INT_MASK,
.tmu_irqstatus = EXYNOS5440_TMU_IRQ_STATUS,
.emul_con = EXYNOS5440_TMU_S0_7_DEBUG,
.emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT,
diff --git a/drivers/thermal/samsung/exynos_tmu_data.h b/drivers/thermal/samsung/exynos_tmu_data.h
index a1ea19d..d9495a4 100644
--- a/drivers/thermal/samsung/exynos_tmu_data.h
+++ b/drivers/thermal/samsung/exynos_tmu_data.h
@@ -69,9 +69,10 @@
#define EXYNOS_TMU_RISE_INT_MASK 0x111
#define EXYNOS_TMU_RISE_INT_SHIFT 0
#define EXYNOS_TMU_FALL_INT_MASK 0x111
-#define EXYNOS_TMU_FALL_INT_SHIFT 12
#define EXYNOS_TMU_CLEAR_RISE_INT 0x111
#define EXYNOS_TMU_CLEAR_FALL_INT (0x111 << 12)
+#define EXYNOS_TMU_CLEAR_FALL_INT_SHIFT 12
+#define EXYNOS5440_TMU_CLEAR_FALL_INT_SHIFT 4
#define EXYNOS_TMU_TRIP_MODE_SHIFT 13
#define EXYNOS_TMU_TRIP_MODE_MASK 0x7
#define EXYNOS_TMU_THERM_TRIP_EN_SHIFT 12
@@ -119,7 +120,6 @@
#define EXYNOS5440_TMU_RISE_INT_MASK 0xf
#define EXYNOS5440_TMU_RISE_INT_SHIFT 0
#define EXYNOS5440_TMU_FALL_INT_MASK 0xf
-#define EXYNOS5440_TMU_FALL_INT_SHIFT 4
#define EXYNOS5440_TMU_INTEN_RISE0_SHIFT 0
#define EXYNOS5440_TMU_INTEN_RISE1_SHIFT 1
#define EXYNOS5440_TMU_INTEN_RISE2_SHIFT 2
--
1.7.10.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Naveen Krishna Chatradhi: "[PATCH v12 2/4] thermal: samsung: change base_common to moremeaningful base_second"
Previous message: Jiang Liu: "[RFC PATCH] ixgbe: acquire RCU read lock when calling netdev_for_each_all_upper_dev_rcu()"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]