Re: [PATCH v3 01/21 resend] serial: rewrite pxa2xx-uart to use8250_core

[Sergei Ianovich]

On Thu, 2013-12-19 at 13:35 +0400, Sergei Ianovich wrote:
> Hi Heikki,
> 
> On Thu, 2013-12-19 at 10:51 +0200, Heikki Krogerus wrote:
> > I noticed one more thing. I'm sorry about commenting this late.
> > 
> > Since you set the type PORT_XSCALE, don's you want to use
> > UPF_FIXED_TYPE flag instead of the UPF_SKIP_TEST here? Otherwise the
> > type will just get overridden and autoconfig() will be executed.
> 
> UPF_FIXED_PORT was my first guess. However, it didn't work.
> 
> I've also tried to do ioremap in serial_pxa_probe instead of using
> UPF_IOREMAP. This didn't work as well.

I didn't clarify properly.

UPF_SKIP_TEST skips only the loopback test. This test could work on PXA,
but requires PXA-specific pre-initialization. There are more test after
the loopback one, which will fail if we are not on PXA. So I decided
that skipping it is easier than tricky rewriting of autoconfig().

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/