[PATCH v1] xhci: Switch Intel Lynx Point ports to EHCI on shutdown

[Denis Turischev]

The same issue like with Panther Point chipsets. If the USB ports are
switched to xHCI on shutdown, the xHCI host will send a spurious interrupt,
which will wake the system. Some BIOS have work around for this, but not all.

The bug can be avoided if the USB ports are switched back to EHCI on
shutdown.

v1: add new device id locally, not in <linux/pci_ids.h>

Signed-off-by: Denis Turischev <denis@xxxxxxxxxxxxxx>

diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
--- a/drivers/usb/host/xhci-pci.c	2013-12-19 11:36:12.049589400 +0200
+++ b/drivers/usb/host/xhci-pci.c	2013-12-19 11:37:27.261590385 +0200
@@ -34,6 +34,8 @@
 #define PCI_VENDOR_ID_ETRON		0x1b6f
 #define PCI_DEVICE_ID_ASROCK_P67	0x7023

+#define PCI_DEVICE_ID_INTEL_LYNXPOINT_XHCI	0x9c31
+
 static const char hcd_name[] = "xhci_hcd";

 /* called after powerup, by probe or system-pm "wakeup" */
@@ -91,8 +93,9 @@
 		xhci->quirks |= XHCI_LPM_SUPPORT;
 		xhci->quirks |= XHCI_INTEL_HOST;
 	}
-	if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
-			pdev->device == PCI_DEVICE_ID_INTEL_PANTHERPOINT_XHCI) {
+	if (pdev->vendor == PCI_VENDOR_ID_INTEL && (
+			(pdev->device == PCI_DEVICE_ID_INTEL_PANTHERPOINT_XHCI) ||
+			(pdev->device == PCI_DEVICE_ID_INTEL_LYNXPOINT_XHCI))) {
 		xhci->quirks |= XHCI_EP_LIMIT_QUIRK;
 		xhci->limit_active_eps = 64;
 		xhci->quirks |= XHCI_SW_BW_CHECKING;
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/