[PATCH] thermal: samsung: Add TMU support for Exynos5260 SoCs

From: Naveen Krishna Chatradhi
Date: Fri Dec 20 2013 - 07:18:36 EST

Next message: Ingo Molnar: "Re: [PATCH 0/4] Fix ebizzy performance regression due to X86 TLBrange flush v2"
Previous message: Naveen Krishna Chatradhi: "[PATCH] thermal:samsung: fix compilation warning"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

This patch adds the registers, bit fields and compatible strings
required to support for the 5 TMU channels on Exynos5260.

Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@xxxxxxxxxxx>
---
This patch goes on top of the series (Reviewed and Acked)
https://www.mail-archive.com/devicetree@xxxxxxxxxxxxxxx/msg08043.html

.../devicetree/bindings/thermal/exynos-thermal.txt | 1 +
drivers/thermal/samsung/exynos_tmu.c | 5 ++
drivers/thermal/samsung/exynos_tmu.h | 2 +
drivers/thermal/samsung/exynos_tmu_data.c | 92 ++++++++++++++++++++
drivers/thermal/samsung/exynos_tmu_data.h | 19 ++++
5 files changed, 119 insertions(+)

diff --git a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt
index 79c4055..c949092 100644
--- a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt
@@ -6,6 +6,7 @@
"samsung,exynos4412-tmu"
"samsung,exynos4210-tmu"
"samsung,exynos5250-tmu"
+ "samsung,exynos5260-tmu"
"samsung,exynos5420-tmu" for TMU channel 0, 1 on Exynos5420
"samsung,exynos5420-tmu-ext-triminfo" for TMU channels 2, 3 and 4
Exynos5420 (Must pass triminfo base and triminfo clock)
diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
index 3246ace..557f9f3 100644
--- a/drivers/thermal/samsung/exynos_tmu.c
+++ b/drivers/thermal/samsung/exynos_tmu.c
@@ -512,6 +512,10 @@ static const struct of_device_id exynos_tmu_match[] = {
.data = (void *)EXYNOS5250_TMU_DRV_DATA,
},
{
+ .compatible = "samsung,exynos5260-tmu",
+ .data = (void *)EXYNOS5260_TMU_DRV_DATA,
+ },
+ {
.compatible = "samsung,exynos5420-tmu",
.data = (void *)EXYNOS5420_TMU_DRV_DATA,
},
@@ -673,6 +677,7 @@ static int exynos_tmu_probe(struct platform_device *pdev)
if (pdata->type == SOC_ARCH_EXYNOS4210 ||
pdata->type == SOC_ARCH_EXYNOS4412 ||
pdata->type == SOC_ARCH_EXYNOS5250 ||
+ pdata->type == SOC_ARCH_EXYNOS5260 ||
pdata->type == SOC_ARCH_EXYNOS5420_TRIMINFO ||
pdata->type == SOC_ARCH_EXYNOS5440)
data->soc = pdata->type;
diff --git a/drivers/thermal/samsung/exynos_tmu.h b/drivers/thermal/samsung/exynos_tmu.h
index 60cce28..edd08cf 100644
--- a/drivers/thermal/samsung/exynos_tmu.h
+++ b/drivers/thermal/samsung/exynos_tmu.h
@@ -43,6 +43,7 @@ enum soc_type {
SOC_ARCH_EXYNOS4210 = 1,
SOC_ARCH_EXYNOS4412,
SOC_ARCH_EXYNOS5250,
+ SOC_ARCH_EXYNOS5260,
SOC_ARCH_EXYNOS5420_TRIMINFO,
SOC_ARCH_EXYNOS5440,
};
@@ -150,6 +151,7 @@ struct exynos_tmu_registers {
u32 triminfo_85_shift;

u32 triminfo_ctrl;
+ u32 triminfo_ctrl1;
u32 triminfo_reload_shift;

u32 tmu_ctrl;
diff --git a/drivers/thermal/samsung/exynos_tmu_data.c b/drivers/thermal/samsung/exynos_tmu_data.c
index 2670cbe..4bb0b37 100644
--- a/drivers/thermal/samsung/exynos_tmu_data.c
+++ b/drivers/thermal/samsung/exynos_tmu_data.c
@@ -194,6 +194,98 @@ struct exynos_tmu_init_data const exynos5250_default_tmu_data = {
};
#endif

+#if defined(CONFIG_SOC_EXYNOS5260)
+static const struct exynos_tmu_registers exynos5260_tmu_registers = {
+ .triminfo_data = EXYNOS_TMU_REG_TRIMINFO,
+ .triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT,
+ .triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT,
+ .tmu_ctrl = EXYNOS_TMU_REG_CONTROL,
+ .tmu_ctrl = EXYNOS_TMU_REG_CONTROL1,
+ .buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT,
+ .buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK,
+ .therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT,
+ .therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK,
+ .therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT,
+ .buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT,
+ .buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK,
+ .core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT,
+ .tmu_status = EXYNOS_TMU_REG_STATUS,
+ .tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP,
+ .threshold_th0 = EXYNOS_THD_TEMP_RISE,
+ .threshold_th1 = EXYNOS_THD_TEMP_FALL,
+ .tmu_inten = EXYNOS5260_TMU_REG_INTEN,
+ .inten_rise0_shift = EXYNOS_TMU_INTEN_RISE0_SHIFT,
+ .inten_rise1_shift = EXYNOS_TMU_INTEN_RISE1_SHIFT,
+ .inten_rise2_shift = EXYNOS_TMU_INTEN_RISE2_SHIFT,
+ .inten_rise3_shift = EXYNOS_TMU_INTEN_RISE3_SHIFT,
+ .inten_fall0_shift = EXYNOS_TMU_INTEN_FALL0_SHIFT,
+ .tmu_intstat = EXYNOS5260_TMU_REG_INTSTAT,
+ .tmu_intclear = EXYNOS5260_TMU_REG_INTCLEAR,
+ .intclr_fall_shift = EXYNOS5420_TMU_CLEAR_FALL_INT_SHIFT,
+ .intclr_rise_shift = EXYNOS_TMU_RISE_INT_SHIFT,
+ .intclr_rise_mask = EXYNOS5260_TMU_RISE_INT_MASK,
+ .intclr_fall_mask = EXYNOS5260_TMU_FALL_INT_MASK,
+ .emul_con = EXYNOS5260_EMUL_CON,
+ .emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT,
+ .emul_time_shift = EXYNOS_EMUL_TIME_SHIFT,
+ .emul_time_mask = EXYNOS_EMUL_TIME_MASK,
+};
+
+#define __EXYNOS5260_TMU_DATA \
+ .threshold_falling = 10, \
+ .trigger_levels[0] = 85, \
+ .trigger_levels[1] = 103, \
+ .trigger_levels[2] = 110, \
+ .trigger_levels[3] = 120, \
+ .trigger_enable[0] = true, \
+ .trigger_enable[1] = true, \
+ .trigger_enable[2] = true, \
+ .trigger_enable[3] = false, \
+ .trigger_type[0] = THROTTLE_ACTIVE, \
+ .trigger_type[1] = THROTTLE_ACTIVE, \
+ .trigger_type[2] = SW_TRIP, \
+ .trigger_type[3] = HW_TRIP, \
+ .max_trigger_level = 4, \
+ .gain = 8, \
+ .reference_voltage = 16, \
+ .noise_cancel_mode = 4, \
+ .cal_type = TYPE_ONE_POINT_TRIMMING, \
+ .efuse_value = 55, \
+ .min_efuse_value = 40, \
+ .max_efuse_value = 100, \
+ .first_point_trim = 25, \
+ .second_point_trim = 85, \
+ .default_temp_offset = 50, \
+ .freq_tab[0] = { \
+ .freq_clip_max = 800 * 1000, \
+ .temp_level = 85, \
+ }, \
+ .freq_tab[1] = { \
+ .freq_clip_max = 200 * 1000, \
+ .temp_level = 103, \
+ }, \
+ .freq_tab_count = 2, \
+ .registers = &exynos5260_tmu_registers, \
+
+#define EXYNOS5260_TMU_DATA \
+ __EXYNOS5260_TMU_DATA \
+ .type = SOC_ARCH_EXYNOS5260, \
+ .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD | \
+ TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \
+ TMU_SUPPORT_EMUL_TIME)
+
+struct exynos_tmu_init_data const exynos5260_default_tmu_data = {
+ .tmu_data = {
+ { EXYNOS5260_TMU_DATA },
+ { EXYNOS5260_TMU_DATA },
+ { EXYNOS5260_TMU_DATA },
+ { EXYNOS5260_TMU_DATA },
+ { EXYNOS5260_TMU_DATA },
+ },
+ .tmu_count = 5,
+};
+#endif
+
#if defined(CONFIG_SOC_EXYNOS5420)
static const struct exynos_tmu_registers exynos5420_tmu_registers = {
.triminfo_data = EXYNOS_TMU_REG_TRIMINFO,
diff --git a/drivers/thermal/samsung/exynos_tmu_data.h b/drivers/thermal/samsung/exynos_tmu_data.h
index 41f06dc..d268981 100644
--- a/drivers/thermal/samsung/exynos_tmu_data.h
+++ b/drivers/thermal/samsung/exynos_tmu_data.h
@@ -87,6 +87,7 @@
#define EXYNOS_TMU_INTEN_FALL0_SHIFT 16
#define EXYNOS_TMU_INTEN_FALL1_SHIFT 20
#define EXYNOS_TMU_INTEN_FALL2_SHIFT 24
+#define EXYNOS_TMU_INTEN_FALL3_SHIFT 28

#define EXYNOS_EMUL_TIME 0x57F0
#define EXYNOS_EMUL_TIME_MASK 0xffff
@@ -97,6 +98,17 @@

#define EXYNOS_MAX_TRIGGER_PER_REG 4

+/* Exynos5260 specific */
+#define EXYNOS_TMU_REG_CONTROL1 0x24
+#define EXYNOS5260_TMU_REG_INTEN 0xC0
+#define EXYNOS5260_TMU_REG_INTSTAT 0xC4
+#define EXYNOS5260_TMU_REG_INTCLEAR 0xC8
+#define EXYNOS5260_TMU_CLEAR_RISE_INT 0x1111
+#define EXYNOS5260_TMU_CLEAR_FALL_INT (0x1111 << 16)
+#define EXYNOS5260_TMU_RISE_INT_MASK 0x1111
+#define EXYNOS5260_TMU_FALL_INT_MASK 0x1111
+#define EXYNOS5260_EMUL_CON 0x100
+
/* Exynos4412 specific */
#define EXYNOS4412_MUX_ADDR_VALUE 6
#define EXYNOS4412_MUX_ADDR_SHIFT 20
@@ -157,6 +169,13 @@ extern struct exynos_tmu_init_data const exynos5250_default_tmu_data;
#define EXYNOS5250_TMU_DRV_DATA (NULL)
#endif

+#if defined(CONFIG_SOC_EXYNOS5260)
+extern struct exynos_tmu_init_data const exynos5260_default_tmu_data;
+#define EXYNOS5260_TMU_DRV_DATA (&exynos5260_default_tmu_data)
+#else
+#define EXYNOS5260_TMU_DRV_DATA (NULL)
+#endif
+
#if defined(CONFIG_SOC_EXYNOS5420)
extern struct exynos_tmu_init_data const exynos5420_default_tmu_data;
#define EXYNOS5420_TMU_DRV_DATA (&exynos5420_default_tmu_data)
--
1.7.10.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Ingo Molnar: "Re: [PATCH 0/4] Fix ebizzy performance regression due to X86 TLBrange flush v2"
Previous message: Naveen Krishna Chatradhi: "[PATCH] thermal:samsung: fix compilation warning"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]