[PATCHv2 1/3] silicom: fix whitespace issues in bypass.c
From: Michael Hoefler
Date: Fri Dec 20 2013 - 08:52:19 EST
This patch addresses several problems in bypass.c found by checkpatch.
Furthermore it removes/adds some empty lines to make the code more readable.
The following problems are fixed:
- line over 80 characters
- space after logical operator !
- spaces instead of tabs
- missing empty line after local declarations
- empty line after {
The empty line issues were not discovered by checkpatch but in my opinion these
changes make perfect sense in terms of readability.
Signed-off-by: Michael Hoefler <michael.hoefler@xxxxxxxxxxxxxxxxxxxxxxx>
Signed-off-by: Christoph Kohl <christoph.kohl@xxxxxxxxxxx>
---
drivers/staging/silicom/bypasslib/bypass.c | 111 ++++++++++++++++-------------
1 file changed, 61 insertions(+), 50 deletions(-)
diff --git a/drivers/staging/silicom/bypasslib/bypass.c b/drivers/staging/silicom/bypasslib/bypass.c
index dda1b2a..14721a9 100644
--- a/drivers/staging/silicom/bypasslib/bypass.c
+++ b/drivers/staging/silicom/bypasslib/bypass.c
@@ -7,11 +7,11 @@
/* the Free Software Foundation, located in the file LICENSE. */
/* */
/* */
-/* bypass.c */
+/* bypass.c */
/* */
/******************************************************************************/
-#if defined(CONFIG_SMP) && ! defined(__SMP__)
+#if defined(CONFIG_SMP) && !defined(__SMP__)
#define __SMP__
#endif
@@ -66,13 +66,12 @@ static int doit(int cmd, int if_index, int *data)
int ret = -1;
struct net_device *dev;
struct net_device *n;
- for_each_netdev_safe(&init_net, dev, n) {
+ for_each_netdev_safe(&init_net, dev, n) {
if (dev->ifindex == if_index) {
ret = do_cmd(dev, &ifr, cmd, data);
if (ret < 0)
ret = -1;
-
}
}
@@ -82,50 +81,59 @@ static int doit(int cmd, int if_index, int *data)
#define bp_symbol_get(fn_name) symbol_get(fn_name)
#define bp_symbol_put(fn_name) symbol_put(fn_name)
-#define SET_BPLIB_INT_FN(fn_name, arg_type, arg, ret) \
- ({ int (* fn_ex)(arg_type)=NULL; \
- fn_ex=bp_symbol_get(fn_name##_sd); \
- if(fn_ex) { \
- ret= fn_ex(arg); \
- bp_symbol_put(fn_name##_sd); \
- } else ret=-1; \
- })
-
-#define SET_BPLIB_INT_FN2(fn_name, arg_type, arg, arg_type1, arg1, ret) \
- ({ int (* fn_ex)(arg_type,arg_type1)=NULL; \
- fn_ex=bp_symbol_get(fn_name##_sd); \
- if(fn_ex) { \
- ret= fn_ex(arg,arg1); \
- bp_symbol_put(fn_name##_sd); \
- } else ret=-1; \
- })
-#define SET_BPLIB_INT_FN3(fn_name, arg_type, arg, arg_type1, arg1,arg_type2, arg2, ret) \
- ({ int (* fn_ex)(arg_type,arg_type1, arg_type2)=NULL; \
- fn_ex=bp_symbol_get(fn_name##_sd); \
- if(fn_ex) { \
- ret= fn_ex(arg,arg1,arg2); \
- bp_symbol_put(fn_name##_sd); \
- } else ret=-1; \
- })
-
-#define DO_BPLIB_GET_ARG_FN(fn_name,ioctl_val, if_index) \
- ({ int data, ret=0; \
- if(is_dev_sd(if_index)){ \
- SET_BPLIB_INT_FN(fn_name, int, if_index, ret); \
- return ret; \
- } \
- return doit(ioctl_val,if_index, &data); \
- })
-
-#define DO_BPLIB_SET_ARG_FN(fn_name,ioctl_val,if_index,arg) \
- ({ int data, ret=0; \
- if(is_dev_sd(if_index)){ \
- SET_BPLIB_INT_FN2(fn_name, int, if_index, int, arg, ret); \
- return ret; \
- } \
- data=arg; \
- return doit(ioctl_val,if_index, &data); \
- })
+#define SET_BPLIB_INT_FN(fn_name, arg_type, arg, ret) \
+({ int (*fn_ex)(arg_type) = NULL; \
+ fn_ex = bp_symbol_get(fn_name##_sd); \
+ if (fn_ex) { \
+ ret = fn_ex(arg); \
+ bp_symbol_put(fn_name##_sd); \
+ } else { \
+ ret = -1; \
+ } \
+})
+
+#define SET_BPLIB_INT_FN2(fn_name, arg_type, arg, arg_type1, arg1, ret)\
+({ int (*fn_ex)(arg_type, arg_type1) = NULL; \
+ fn_ex = bp_symbol_get(fn_name##_sd); \
+ if (fn_ex) { \
+ ret = fn_ex(arg, arg1); \
+ bp_symbol_put(fn_name##_sd); \
+ } else { \
+ ret = -1; \
+ } \
+})
+
+#define SET_BPLIB_INT_FN3(fn_name, arg_type, arg, arg_type1, arg1, \
+ arg_type2, arg2, ret) \
+({ int (*fn_ex)(arg_type, arg_type1, arg_type2) = NULL; \
+ fn_ex = bp_symbol_get(fn_name##_sd); \
+ if (fn_ex) { \
+ ret = fn_ex(arg, arg1, arg2); \
+ bp_symbol_put(fn_name##_sd); \
+ } else { \
+ ret = -1; \
+ } \
+})
+
+#define DO_BPLIB_GET_ARG_FN(fn_name, ioctl_val, if_index) \
+({ int data, ret = 0; \
+ if (is_dev_sd(if_index)) { \
+ SET_BPLIB_INT_FN(fn_name, int, if_index, ret); \
+ return ret; \
+ } \
+ return doit(ioctl_val, if_index, &data); \
+})
+
+#define DO_BPLIB_SET_ARG_FN(fn_name, ioctl_val, if_index, arg) \
+({ int data, ret = 0; \
+ if (is_dev_sd(if_index)) { \
+ SET_BPLIB_INT_FN2(fn_name, int, if_index, int, \
+ arg, ret); \
+ return ret; \
+ } \
+ data = arg; \
+ return doit(ioctl_val, if_index, &data); \
+})
static int is_dev_sd(int if_index)
{
@@ -268,6 +276,7 @@ EXPORT_SYMBOL(get_bypass_pwup);
static int set_bypass_wd(int if_index, int ms_timeout, int *ms_timeout_set)
{
int data = ms_timeout, ret = 0;
+
if (is_dev_sd(if_index))
SET_BPLIB_INT_FN3(set_bypass_wd, int, if_index, int, ms_timeout,
int *, ms_timeout_set, ret);
@@ -285,6 +294,7 @@ EXPORT_SYMBOL(set_bypass_wd);
static int get_bypass_wd(int if_index, int *ms_timeout_set)
{
int *data = ms_timeout_set, ret = 0;
+
if (is_dev_sd(if_index))
SET_BPLIB_INT_FN2(get_bypass_wd, int, if_index, int *,
ms_timeout_set, ret);
@@ -297,6 +307,7 @@ EXPORT_SYMBOL(get_bypass_wd);
static int get_wd_expire_time(int if_index, int *ms_time_left)
{
int *data = ms_time_left, ret = 0;
+
if (is_dev_sd(if_index))
SET_BPLIB_INT_FN2(get_wd_expire_time, int, if_index, int *,
ms_time_left, ret);
@@ -476,13 +487,14 @@ EXPORT_SYMBOL(get_bp_hw_reset);
static int get_bypass_info(int if_index, struct bp_info *bp_info)
{
int ret = 0;
+
if (is_dev_sd(if_index)) {
SET_BPLIB_INT_FN2(get_bypass_info, int, if_index,
struct bp_info *, bp_info, ret);
} else {
struct net_device *dev;
-
struct net_device *n;
+
for_each_netdev_safe(&init_net, dev, n) {
if (dev->ifindex == if_index) {
struct if_bypass_info *bypass_cb;
@@ -514,7 +526,6 @@ EXPORT_SYMBOL(get_bypass_info);
int init_lib_module(void)
{
-
printk(VERSION);
return 0;
}
--
1.8.1.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/