[tip:x86/urgent] x86: Add check for number of available vectors before CPU down
From: tip-bot for Prarit Bhargava
Date: Fri Dec 20 2013 - 18:40:17 EST
Commit-ID: 5fd782a0553cf9572bd38cb877ee6fbf070ef651
Gitweb: http://git.kernel.org/tip/5fd782a0553cf9572bd38cb877ee6fbf070ef651
Author: Prarit Bhargava <prarit@xxxxxxxxxx>
AuthorDate: Fri, 20 Dec 2013 10:50:09 -0500
Committer: H. Peter Anvin <hpa@xxxxxxxxxxxxxxx>
CommitDate: Fri, 20 Dec 2013 15:24:04 -0800
x86: Add check for number of available vectors before CPU down
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=64791
When a cpu is downed on a system, the irqs on the cpu are assigned to
other cpus. It is possible, however, that when a cpu is downed there
aren't enough free vectors on the remaining cpus to account for the
vectors from the cpu that is being downed.
This results in an interesting "overflow" condition where irqs are
"assigned" to a CPU but are not handled.
For example, when downing cpus on a 1-64 logical processor system:
<snip>
[ 232.021745] smpboot: CPU 61 is now offline
[ 238.480275] smpboot: CPU 62 is now offline
[ 245.991080] ------------[ cut here ]------------
[ 245.996270] WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:264 dev_watchdog+0x246/0x250()
[ 246.005688] NETDEV WATCHDOG: p786p1 (ixgbe): transmit queue 0 timed out
[ 246.013070] Modules linked in: lockd sunrpc iTCO_wdt iTCO_vendor_support sb_edac ixgbe microcode e1000e pcspkr joydev edac_core lpc_ich ioatdma ptp mdio mfd_core i2c_i801 dca pps_core i2c_core wmi acpi_cpufreq isci libsas scsi_transport_sas
[ 246.037633] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.12.0+ #14
[ 246.044451] Hardware name: Intel Corporation S4600LH ........../SVRBD-ROW_T, BIOS SE5C600.86B.01.08.0003.022620131521 02/26/2013
[ 246.057371] 0000000000000009 ffff88081fa03d40 ffffffff8164fbf6 ffff88081fa0ee48
[ 246.065728] ffff88081fa03d90 ffff88081fa03d80 ffffffff81054ecc ffff88081fa13040
[ 246.074073] 0000000000000000 ffff88200cce0000 0000000000000040 0000000000000000
[ 246.082430] Call Trace:
[ 246.085174] <IRQ> [<ffffffff8164fbf6>] dump_stack+0x46/0x58
[ 246.091633] [<ffffffff81054ecc>] warn_slowpath_common+0x8c/0xc0
[ 246.098352] [<ffffffff81054fb6>] warn_slowpath_fmt+0x46/0x50
[ 246.104786] [<ffffffff815710d6>] dev_watchdog+0x246/0x250
[ 246.110923] [<ffffffff81570e90>] ? dev_deactivate_queue.constprop.31+0x80/0x80
[ 246.119097] [<ffffffff8106092a>] call_timer_fn+0x3a/0x110
[ 246.125224] [<ffffffff8106280f>] ? update_process_times+0x6f/0x80
[ 246.132137] [<ffffffff81570e90>] ? dev_deactivate_queue.constprop.31+0x80/0x80
[ 246.140308] [<ffffffff81061db0>] run_timer_softirq+0x1f0/0x2a0
[ 246.146933] [<ffffffff81059a80>] __do_softirq+0xe0/0x220
[ 246.152976] [<ffffffff8165fedc>] call_softirq+0x1c/0x30
[ 246.158920] [<ffffffff810045f5>] do_softirq+0x55/0x90
[ 246.164670] [<ffffffff81059d35>] irq_exit+0xa5/0xb0
[ 246.170227] [<ffffffff8166062a>] smp_apic_timer_interrupt+0x4a/0x60
[ 246.177324] [<ffffffff8165f40a>] apic_timer_interrupt+0x6a/0x70
[ 246.184041] <EOI> [<ffffffff81505a1b>] ? cpuidle_enter_state+0x5b/0xe0
[ 246.191559] [<ffffffff81505a17>] ? cpuidle_enter_state+0x57/0xe0
[ 246.198374] [<ffffffff81505b5d>] cpuidle_idle_call+0xbd/0x200
[ 246.204900] [<ffffffff8100b7ae>] arch_cpu_idle+0xe/0x30
[ 246.210846] [<ffffffff810a47b0>] cpu_startup_entry+0xd0/0x250
[ 246.217371] [<ffffffff81646b47>] rest_init+0x77/0x80
[ 246.223028] [<ffffffff81d09e8e>] start_kernel+0x3ee/0x3fb
[ 246.229165] [<ffffffff81d0989f>] ? repair_env_string+0x5e/0x5e
[ 246.235787] [<ffffffff81d095a5>] x86_64_start_reservations+0x2a/0x2c
[ 246.242990] [<ffffffff81d0969f>] x86_64_start_kernel+0xf8/0xfc
[ 246.249610] ---[ end trace fb74fdef54d79039 ]---
[ 246.254807] ixgbe 0000:c2:00.0 p786p1: initiating reset due to tx timeout
[ 246.262489] ixgbe 0000:c2:00.0 p786p1: Reset adapter
Last login: Mon Nov 11 08:35:14 from 10.18.17.119
[root@(none) ~]# [ 246.792676] ixgbe 0000:c2:00.0 p786p1: detected SFP+: 5
[ 249.231598] ixgbe 0000:c2:00.0 p786p1: NIC Link is Up 10 Gbps, Flow Control: RX/TX
[ 246.792676] ixgbe 0000:c2:00.0 p786p1: detected SFP+: 5
[ 249.231598] ixgbe 0000:c2:00.0 p786p1: NIC Link is Up 10 Gbps, Flow Control: RX/TX
(last lines keep repeating. ixgbe driver is dead until module reload.)
If the downed cpu has more vectors than are free on the remaining cpus on the
system, it is possible that some vectors are "orphaned" even though they are
assigned to a cpu. In this case, since the ixgbe driver had a watchdog, the
watchdog fired and notified that something was wrong.
This patch adds a function, check_vectors(), to compare the number of vectors
on the CPU going down and compares it to the number of vectors available on
the system. If there aren't enough vectors for the CPU to go down, an
error is returned and propogated back to userspace.
v2: Do not need to look at percpu irqs
v3: Need to check affinity to prevent counting of MSIs in IOAPIC Lowest
Priority Mode
Signed-off-by: Prarit Bhargava <prarit@xxxxxxxxxx>
Link: http://lkml.kernel.org/r/1387554609-9823-1-git-send-email-prarit@xxxxxxxxxx
Reviewed-by: Andi Kleen <ak@xxxxxxxxxxxxxxx>
Cc: Michel Lespinasse <walken@xxxxxxxxxx>
Cc: Seiji Aguchi <seiji.aguchi@xxxxxxx>
Cc: Yang Zhang <yang.z.zhang@xxxxxxxxx>
Cc: Paul Gortmaker <paul.gortmaker@xxxxxxxxxxxxx>
Cc: Janet Morgan <janet.morgan@xxxxxxxxx>
Cc: Tony Luck <tony.luck@xxxxxxxxx>
Cc: Ruiv Wang <ruiv.wang@xxxxxxxxx>
Cc: Gong Chen <gong.chen@xxxxxxxxxxxxxxx>
Signed-off-by: H. Peter Anvin <hpa@xxxxxxxxxxxxxxx>
Cc: <stable@xxxxxxxxxxxxxxx> # see note below
[ hpa: I'm tagging this for -stable, as it is a serious failure on
these large systems, but this is definitely a policy call for the
-stable maintainers. ]
---
arch/x86/include/asm/irq.h | 1 +
arch/x86/kernel/irq.c | 44 ++++++++++++++++++++++++++++++++++++++++++++
arch/x86/kernel/smpboot.c | 6 ++++++
3 files changed, 51 insertions(+)
diff --git a/arch/x86/include/asm/irq.h b/arch/x86/include/asm/irq.h
index 0ea10f27..dfd7372 100644
--- a/arch/x86/include/asm/irq.h
+++ b/arch/x86/include/asm/irq.h
@@ -25,6 +25,7 @@ extern void irq_ctx_init(int cpu);
#ifdef CONFIG_HOTPLUG_CPU
#include <linux/cpumask.h>
+extern int check_vectors(void);
extern void fixup_irqs(void);
extern void irq_force_complete_move(int);
#endif
diff --git a/arch/x86/kernel/irq.c b/arch/x86/kernel/irq.c
index 22d0687..483f111 100644
--- a/arch/x86/kernel/irq.c
+++ b/arch/x86/kernel/irq.c
@@ -262,6 +262,50 @@ __visible void smp_trace_x86_platform_ipi(struct pt_regs *regs)
EXPORT_SYMBOL_GPL(vector_used_by_percpu_irq);
#ifdef CONFIG_HOTPLUG_CPU
+/*
+ * This cpu is going to be removed and its vectors migrated to the remaining
+ * online cpus. Check to see if there are enough vectors in the remaining cpus.
+ */
+int check_vectors(void)
+{
+ int irq, cpu;
+ unsigned int vector, this_count, count;
+ struct irq_desc *desc;
+ struct irq_data *data;
+ struct cpumask *affinity;
+
+ this_count = 0;
+ for (vector = FIRST_EXTERNAL_VECTOR; vector < NR_VECTORS; vector++) {
+ irq = __this_cpu_read(vector_irq[vector]);
+ if (irq >= 0) {
+ desc = irq_to_desc(irq);
+ data = irq_desc_get_irq_data(desc);
+ affinity = data->affinity;
+ if (irq_has_action(irq) || !irqd_is_per_cpu(data) ||
+ !cpumask_subset(affinity, cpu_online_mask))
+ this_count++;
+ }
+ }
+
+ count = 0;
+ for_each_online_cpu(cpu) {
+ if (cpu == smp_processor_id())
+ continue;
+ for (vector = FIRST_EXTERNAL_VECTOR; vector < NR_VECTORS;
+ vector++) {
+ if (per_cpu(vector_irq, cpu)[vector] < 0)
+ count++;
+ }
+ }
+
+ if (count < this_count) {
+ pr_warn("CPU %d disable failed: CPU has %u vectors assigned and there are only %u available.\n",
+ smp_processor_id(), this_count, count);
+ return -ERANGE;
+ }
+ return 0;
+}
+
/* A cpu has been removed from cpu_online_mask. Reset irq affinities. */
void fixup_irqs(void)
{
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 85dc05a..7ac6654 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -1312,6 +1312,12 @@ void cpu_disable_common(void)
int native_cpu_disable(void)
{
+ int ret;
+
+ ret = check_vectors();
+ if (ret)
+ return ret;
+
clear_local_APIC();
cpu_disable_common();
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/