Re: [PATCH v2][TRIVIAL] x86/smpboot: fix cpu bootup message

From: Xie XiuQi
Date: Mon Dec 23 2013 - 22:53:30 EST

Next message: Nicholas Bellinger: "[PATCH] bio-integrity: Fix bio_integrity_verify segment start bug"
Previous message: Anshuman Khandual: "Re: [PATCH V4 08/10] powerpc, perf: Enable SW filtering in branchstack sampling framework"
In reply to: Yinghai Lu: "Re: [PATCH v2][TRIVIAL] x86/smpboot: fix cpu bootup message"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On 2013/12/24 9:34, Yinghai Lu wrote:
> On Mon, Dec 23, 2013 at 5:09 PM, Xie XiuQi <xiexiuqi@xxxxxxxxxx> wrote:
>> On 2013/12/23 21:34, Borislav Petkov wrote:
>>> On Mon, Dec 23, 2013 at 04:33:00PM +0800, Xie XiuQi wrote:
>>>> When CPU0 and CPU1 aren't in same package, we got message
>>>> like this:
>>>>
>>
>> [...]
>>
>>>>
>>>> diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
>>>> index 85dc05a..9e82c1e 100644
>>>> --- a/arch/x86/kernel/smpboot.c
>>>> +++ b/arch/x86/kernel/smpboot.c
>>>> @@ -639,7 +639,7 @@ static void announce_cpu(int cpu, int apicid)
>>>> {
>>>> static int current_node = -1;
>>>> int node = early_cpu_to_node(cpu);
>>>> - static int width, node_width;
>>>> + static int width, node_width, padding;
>>>>
>>>> if (!width)
>>>> width = num_digits(num_possible_cpus()) + 1; /* + '#' sign */
>>>> @@ -658,11 +658,13 @@ static void announce_cpu(int cpu, int apicid)
>>>>
>>>> printk(KERN_INFO ".... node %*s#%d, CPUs: ",
>>>> node_width - num_digits(node), " ", node);
>>>> - }
>>>>
>>>> - /* Add padding for the BSP */
>>>> - if (cpu == 1)
>>>> - pr_cont("%*s", width + 1, " ");
>>>> + /* Add padding for the BSP */
>>>> + if (!padding && (early_cpu_to_node(0) == current_node)) {
>>>
>>> You don't need "padding".
>>>
>>
>> On another machine, the configuration is:
>>
>> xiexiuqi@localhost:~> lscpu
>> [...]
>> NUMA node0 CPU(s): 4-7,12-15
>> NUMA node1 CPU(s): 0-3,8-11
>>
>> Without "padding", we'll get message like this:
>>
>> [ 0.349339] x86: Booting SMP configuration:
>> [ 0.353504] .... node #1, CPUs: #1 #2 #3
>> [ 0.398812] .... node #0, CPUs: #4 #5 #6 #7
>> [ 0.535186] .... node #1, CPUs: #8 #9 #10 #11
>> [ 0.594312] .... node #0, CPUs: #12 #13 #14 #15
>> [ 0.652398] x86: Booted up 2 nodes, 16 CPUs
>>
>
> What does your MADT look like?
>
> you can you post head of bootlog with MADT print out?
>

This's my boot log, could you find any problems?

[ 0.000000] DMI: Huawei Technologies Co., Ltd. Tecal RH2285 /BC11BTSA , BIOS CTSAV036 04/27/2011
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0xc40000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-E7FFF write-through
[ 0.000000] E8000-EBFFF write-protect
[ 0.000000] EC000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask F800000000 write-back
[ 0.000000] 1 base 0800000000 mask FC00000000 write-back
[ 0.000000] 2 base 0C00000000 mask FFC0000000 write-back
[ 0.000000] 3 base 00C0000000 mask FFC0000000 uncachable
[ 0.000000] 4 base 00BF800000 mask FFFF800000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xbf790 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000093000] 93000 size 28672
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01ed2000, 0x01ed2fff] PGTABLE
[ 0.000000] BRK [0x01ed3000, 0x01ed3fff] PGTABLE
[ 0.000000] BRK [0x01ed4000, 0x01ed4fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xc3fe00000-0xc3fffffff]
[ 0.000000] [mem 0xc3fe00000-0xc3fffffff] page 1G
[ 0.000000] init_memory_mapping: [mem 0xc3c000000-0xc3fdfffff]
[ 0.000000] [mem 0xc3c000000-0xc3fdfffff] page 1G
[ 0.000000] init_memory_mapping: [mem 0xc00000000-0xc3bffffff]
[ 0.000000] [mem 0xc00000000-0xc3bffffff] page 1G
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbf78ffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0xbf5fffff] page 2M
[ 0.000000] [mem 0xbf600000-0xbf78ffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0xbffffffff]
[ 0.000000] [mem 0x100000000-0xbffffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x3708a000-0x37feffff]
[ 0.000000] ACPI: RSDP 00000000000fa0d0 000024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000bf790100 00005C (v01 042711 XSDT1631 20110427 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000bf790290 0000F4 (v04 042711 FACP1631 20110427 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000bf7904f0 004E48 (v02 CTSAV CTSAV036 00000036 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000bf79e000 000040
[ 0.000000] ACPI: APIC 00000000bf790390 000118 (v02 042711 APIC1631 20110427 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000bf7904b0 00003C (v01 042711 OEMMCFG 20110427 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000bf79e040 000082 (v01 042711 OEMB1631 20110427 MSFT 00000097)
[ 0.000000] ACPI: SRAT 00000000bf79a4f0 0001D0 (v02 042711 OEMSRAT 00000001 INTL 00000001)
[ 0.000000] ACPI: HPET 00000000bf79a6c0 000038 (v01 042711 OEMHPET 20110427 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000bf7a19e0 000363 (v01 DpgPmm CpuPm 00000012 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x12 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x14 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x13 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x15 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 0x20 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x22 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x32 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x34 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x21 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x23 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x33 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x35 -> Node 1
[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff]
[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x63fffffff]
[ 0.000000] SRAT: Node 1 PXM 1 [mem 0x640000000-0xc3fffffff]
[ 0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xbfffffff] -> [mem 0x00000000-0xbfffffff]
[ 0.000000] NUMA: Node 0 [mem 0x00000000-0xbfffffff] + [mem 0x100000000-0x63fffffff] -> [mem 0x00000000-0x63fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x63fffffff]
[ 0.000000] NODE_DATA [mem 0x63ffd9000-0x63fffffff]
[ 0.000000] Initmem setup node 1 [mem 0x640000000-0xc3fffffff]
[ 0.000000] NODE_DATA [mem 0xc3ffd7000-0xc3fffdfff]
[ 0.000000] Reserving 128MB of memory at 752MB for crashkernel (System RAM: 49143MB)
[ 0.000000] [ffffea0000000000-ffffea0015dfffff] PMD -> [ffff880627e00000-ffff88063cdfffff] on node 0
[ 0.000000] [ffffea0015e00000-ffffea002adfffff] PMD -> [ffff880c27600000-ffff880c3c5fffff] on node 1
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0xc3fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x00099fff]
[ 0.000000] node 0: [mem 0x00100000-0xbf78ffff]
[ 0.000000] node 0: [mem 0x100000000-0x63fffffff]
[ 0.000000] node 1: [mem 0x640000000-0xc3fffffff]
[ 0.000000] On node 0 totalpages: 6289193
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 22 pages reserved
[ 0.000000] DMA zone: 3993 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 10667 pages used for memmap
[ 0.000000] DMA32 zone: 780176 pages, LIFO batch:31
[ 0.000000] Normal zone: 75264 pages used for memmap
[ 0.000000] Normal zone: 5505024 pages, LIFO batch:31
[ 0.000000] On node 1 totalpages: 6291456
[ 0.000000] Normal zone: 86016 pages used for memmap
[ 0.000000] Normal zone: 6291456 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x20] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x22] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x32] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x34] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x12] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x14] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x21] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x23] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x33] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x35] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x13] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x15] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0x90] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0x91] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0x92] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0x93] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0x94] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0x95] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0x96] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x18] lapic_id[0x97] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 6, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x07] address[0xfec8a000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 7, version 32, address 0xfec8a000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 24 CPUs, 8 hotplug CPUs

> wonder if your system have x2apic and xapic mixing.
> then
>
> https://lkml.org/lkml/2012/1/31/57
> [PATCH -v2] x86, acpi: Handle xapic/x2apic entries in MADT at same time
>
> could help.
>
> Thanks
>
> Yinghai
>

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Nicholas Bellinger: "[PATCH] bio-integrity: Fix bio_integrity_verify segment start bug"
Previous message: Anshuman Khandual: "Re: [PATCH V4 08/10] powerpc, perf: Enable SW filtering in branchstack sampling framework"
In reply to: Yinghai Lu: "Re: [PATCH v2][TRIVIAL] x86/smpboot: fix cpu bootup message"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]