Re: [PATCH 1/1] MTD: UBI: try to avoid program data to NOR flashafter erasure interrupted

[Richard Weinberger]

On Thu, Nov 7, 2013 at 9:18 AM, Qi Wang ?? (qiwang) <qiwang@xxxxxxxxxx> wrote:
> Hi:
> As we talked in mail before, please check my patch as below:
>
> From: Qi Wang <qiwang@xxxxxxxxxx>
>
> nor_erase_prepare() will be called before erase a NOR flash, it will program '0'
> into a block to mark this block. But program data into a erasure interrupted block
> can cause program timtout(several minutes at most) error, could impact other
> operation on NOR flash. So UBIFS can read this block first to avoid unneeded
> program operation.
>
> This patch try to put read operation at head of write operation in
> nor_erase_prepare(), read out the data.
> If the data is already corrupt, then no need to program any data into this block,
> just go to erase this block.
>
> Signed-off-by: Qi Wang <qiwang@qiwang@micron.com>

This email address is malformed.

> ---
> diff --git a/drivers/mtd/ubi/io.c b/drivers/mtd/ubi/io.c
> index bf79def..0a6343d 100644
> --- a/drivers/mtd/ubi/io.c
> +++ b/drivers/mtd/ubi/io.c
> @@ -499,6 +499,7 @@ static int nor_erase_prepare(struct ubi_device *ubi, int pnum)
>         size_t written;
>         loff_t addr;
>         uint32_t data = 0;
> +       struct ubi_ec_hdr ec_hdr;
>         /*
>          * Note, we cannot generally define VID header buffers on stack,
>          * because of the way we deal with these buffers (see the header
> @@ -509,49 +510,38 @@ static int nor_erase_prepare(struct ubi_device *ubi, int pnum)
>         struct ubi_vid_hdr vid_hdr;
>
>         /*
> +        * If VID or EC is valid, need to corrupt it before erase operation.
>          * It is important to first invalidate the EC header, and then the VID
>          * header. Otherwise a power cut may lead to valid EC header and
>          * invalid VID header, in which case UBI will treat this PEB as
>          * corrupted and will try to preserve it, and print scary warnings.
>          */
>         addr = (loff_t)pnum * ubi->peb_size;
> -       err = mtd_write(ubi->mtd, addr, 4, &written, (void *)&data);
> -       if (!err) {
> -               addr += ubi->vid_hdr_aloffset;
> -               err = mtd_write(ubi->mtd, addr, 4, &written, (void *)&data);
> -               if (!err)
> -                       return 0;
> +       err = ubi_io_read_ec_hdr(ubi, pnum, &ec_hdr, 0);
> +       if (err != UBI_IO_BAD_HDR_EBADMSG && err != UBI_IO_BAD_HDR &&
> +           err != UBI_IO_FF){
> +               err1 = mtd_write(ubi->mtd, addr, 4, &written, (void *)&data);
> +               if(err1)
> +                       goto error;
>         }
>
> -       /*
> -        * We failed to write to the media. This was observed with Spansion
> -        * S29GL512N NOR flash. Most probably the previously eraseblock erasure
> -        * was interrupted at a very inappropriate moment, so it became
> -        * unwritable. In this case we probably anyway have garbage in this
> -        * PEB.
> -        */
> -       err1 = ubi_io_read_vid_hdr(ubi, pnum, &vid_hdr, 0);
> -       if (err1 == UBI_IO_BAD_HDR_EBADMSG || err1 == UBI_IO_BAD_HDR ||
> -           err1 == UBI_IO_FF) {
> -               struct ubi_ec_hdr ec_hdr;
> -
> -               err1 = ubi_io_read_ec_hdr(ubi, pnum, &ec_hdr, 0);
> -               if (err1 == UBI_IO_BAD_HDR_EBADMSG || err1 == UBI_IO_BAD_HDR ||
> -                   err1 == UBI_IO_FF)
> -                       /*
> -                        * Both VID and EC headers are corrupted, so we can
> -                        * safely erase this PEB and not afraid that it will be
> -                        * treated as a valid PEB in case of an unclean reboot.
> -                        */
> -                       return 0;
> +       err = ubi_io_read_vid_hdr(ubi, pnum, &vid_hdr, 0);
> +       if (err != UBI_IO_BAD_HDR_EBADMSG && err != UBI_IO_BAD_HDR &&
> +           err != UBI_IO_FF){
> +               addr += ubi->vid_hdr_aloffset;
> +               err1 = mtd_write(ubi->mtd, addr, 4, &written, (void *)&data);
> +               if (err1)
> +                       goto error;
>         }
> +       return 0;
>
> +error:
>         /*
> -        * The PEB contains a valid VID header, but we cannot invalidate it.
> +        * The PEB contains a valid VID or EC header, but we cannot invalidate it.
>          * Supposedly the flash media or the driver is screwed up, so return an
>          * error.
>          */
> -       ubi_err("cannot invalidate PEB %d, write returned %d read returned %d",
> +       ubi_err("cannot invalidate PEB %d, read returned %d write returned %d",
>                 pnum, err, err1);
>         ubi_dump_flash(ubi, pnum, 0, ubi->peb_size);
>         return -EIO;
> ---
>
> I have tested this patch on Micron NOR flash, part number is?JS28F512M29EWHA.

Please add this information to the commit message.

> If have any questions, please let me know.

>From UBIs point of view the patch seems OK to me, but it is malformed,
I was unable to apply it using git-am.
Did you use MS Outlook? :)
Please send it using git send-mail or any other sane mailer.

> Thank you
>
> Best Regards,
> Qi Wang ??
> ESG APAC AE
> Tel: 86-021-38997158
> Mobile: 86-15201958202
> Email: qiwang@xxxxxxxxxx
> Address: No 601 Fasai Rd, Pudong, Shanghai, China, 200131



-- 
Thanks,
//richard
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/