Re: [PATCHv2 0/7] DRA7: DT thermal support
From: Eduardo Valentin
Date: Mon Jan 06 2014 - 09:54:42 EST
On 06-01-2014 10:46, Zhang Rui wrote:
> On Mon, 2014-01-06 at 08:36 -0400, Eduardo Valentin wrote:
>> Hello all,
>> Now that the basic thermal DT support is merged into Rui's tree,
>> I am resending this series, which introduces the DT node entries
>> for DRA7 thermal limits representation.
>> The series adds two thermal zones, to represent IVA and DSPEVE,
>> respectively. It also adds the support to tmp102 and a corresponding
>> pcb thermal zone.
>> There are only cosmetic changes from v1. A couple of spaces and tabulations
>> have been fixed, and minor changes in sentences present in commit log.
>> One difference from V1 is the fact that now bandgap is introduced under
>> OCP, which is also a minor diff.
>> This patch series has been runtime tested on DRA7-evm.
>> All best
>> Eduardo Valentin (7):
>> arm: dts: add dra7 DSPEVE thermal data
>> arm: dts: add dra7 IVA thermal data
>> arm: dts: dra7: add bandgap entry
>> arm: dts: add cooling properties on dra7 cpu node
>> arm: dts: dra7: add thermal data
>> arm: dts: add tmp102 i2c sensor node on dra7-evm
>> arm: dts: add thermal zones info on tmp102 for DRA7-EVM
>> arch/arm/boot/dts/dra7-dspeve-thermal.dtsi | 28 ++++++++++++++++++++++++++++
>> arch/arm/boot/dts/dra7-evm.dts | 22 ++++++++++++++++++++++
>> arch/arm/boot/dts/dra7-iva-thermal.dtsi | 28 ++++++++++++++++++++++++++++
>> arch/arm/boot/dts/dra7.dtsi | 26 ++++++++++++++++++++++++++
> I'm okay with this patch set. But as long as this patch set does not
> change any code under drivers/thermal/, I prefer these patches to go to
> your thermal-soc tree first.
No problem at all. I will be queuing them.
>> 4 files changed, 104 insertions(+)
>> create mode 100644 arch/arm/boot/dts/dra7-dspeve-thermal.dtsi
>> create mode 100644 arch/arm/boot/dts/dra7-iva-thermal.dtsi
You have got to be excited about what you are doing. (L. Lamport)
Description: OpenPGP digital signature