Re: Re: [PATCH] Parse missing regulator constraints from device treeblob

[Saurabh Singh]

Hi Mark,

> Please send patches using the process in SubmittingPatches, the formatting
> of the submission is very important for tools like git am which people use to
> work with patches.

As per your request sending the patch and description in git format.
Please find below the patch.

Regards,
Saurabh Singh Sengar
Lead Engineer
Samsung R&D Institute
India

=================================================================================
From Saurabh Singh <saurabh1.s@xxxxxxxxxxx> Mon Sep 17 00:00:00 2001
Date: Thu, 16 Jan 2014 20:36:15 +0530
Subject: [PATCH] From: Saurabh Singh Sengar <saurabh1.s@xxxxxxxxxxx>

This patch adds support for parsing following regulator contraints from
device tree blob.
1. valid modes mask (valid_modes_mask)
2. input microvolt(input_uV)
3. initial mode (initial_mode)
4. initial state (initial_state)
5. state mem (state_mem)
6. state disk (state_disk)
7. state standby (state_standby)

Signed-off-by: Saurabh Singh Sengar <saurabh1.s@xxxxxxxxxxx>
---
 .../devicetree/bindings/regulator/regulator.txt    |   19 +++++++++
 drivers/regulator/of_regulator.c                   |   41 ++++++++++++++++++++
 2 files changed, 60 insertions(+), 0 deletions(-)

diff --git a/Documentation/devicetree/bindings/regulator/regulator.txt b/Documentation/devicetree/bindings/regulator/regulator.txt
index 2bd8f09..7793445 100644
--- a/Documentation/devicetree/bindings/regulator/regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/regulator.txt
@@ -14,6 +14,17 @@ Optional properties:
 - regulator-ramp-delay: ramp delay for regulator(in uV/uS)
   For hardwares which support disabling ramp rate, it should be explicitly
   intialised to zero (regulator-ramp-delay = <0>) for disabling ramp delay.
+- regulator-valid-modes-mask: valid operations for regulator on particular machine
+- regulator-input-uv: regulator input voltage, only if supply is another regulator
+- regulator-initial-mode: default mode to set on startup
+- regulator-initial-state: suspend state to set at init
+- regulator-state-mem, regulator-state-disk, regulator-state-standby:
+	defines regulator suspend to memory, suspend to disk (hibernate) and standby respectively.
+	have following sub-constarints:
+	- regulator-state-uv: suspend voltage
+	- regulator-state-mode: suspend regulator operating mode
+	- regulator-state-enabled: is regulator enabled in this suspend state
+	- regulator-state-disabled: is the regulator disbled in this suspend state
 
 Deprecated properties:
 - regulator-compatible: If a regulator chip contains multiple
@@ -29,6 +40,14 @@ Example:
 		regulator-max-microvolt = <2500000>;
 		regulator-always-on;
 		vin-supply = <&vin>;
+		regulator-valid-modes-mask = <REGULATOR_MODE_FAST>;
+		regulator-initial-mode = <REGULATOR_MODE_STANDBY>;
+		regulator-initial-state = <PM_SUSPEND_MEM>;
+		regulator-state-mem {
+			regulator-state-mode = <REGULATOR_MODE_IDLE>;
+			regulator-state-enabled;
+		};
+
 	};
 
 Regulator Consumers:
diff --git a/drivers/regulator/of_regulator.c b/drivers/regulator/of_regulator.c
index 7827384..328d76f 100644
--- a/drivers/regulator/of_regulator.c
+++ b/drivers/regulator/of_regulator.c
@@ -16,11 +16,27 @@
 #include <linux/regulator/machine.h>
 #include <linux/regulator/of_regulator.h>
 
+/**
+ * set_regulator_state_constraints - set regulator state for low power system states
+ * @np: device node for the low power regulator state
+ * @regulator_state: regulator_state structure need to be filled
+ */
+static void set_regulator_state_constraints(struct device_node *np,
+		struct regulator_state *state)
+{
+	of_property_read_u32(np, "regulator-state-uv", &state->uV);
+	of_property_read_u32(np, "regulator-state-mode", &state->mode);
+	state->enabled = of_property_read_bool(np, "regulator-state-enabled");
+	state->disabled = of_property_read_bool(np, "regulator-state-disabled");
+}
+
+
 static void of_get_regulation_constraints(struct device_node *np,
 					struct regulator_init_data **init_data)
 {
 	const __be32 *min_uV, *max_uV, *uV_offset;
 	const __be32 *min_uA, *max_uA, *ramp_delay;
+	struct device_node *state;
 	struct property *prop;
 	struct regulation_constraints *constraints = &(*init_data)->constraints;
 
@@ -73,6 +89,31 @@ static void of_get_regulation_constraints(struct device_node *np,
 		else
 			constraints->ramp_disable = true;
 	}
+
+	of_property_read_u32(np, "regulator-valid-modes-mask",
+					&constraints->valid_modes_mask);
+	of_property_read_u32(np, "regulator-input-uv",
+					&constraints->input_uV);
+	of_property_read_u32(np, "regulator-initial-mode",
+					&constraints->initial_mode);
+	of_property_read_u32(np, "regulator-initial-state",
+					&constraints->initial_state);
+
+	/* regulator state during low power system states */
+	state = of_find_node_by_name(np, "regulator-state-mem");
+	if (state)
+		set_regulator_state_constraints(state,
+				&constraints->state_mem);
+
+	state = of_find_node_by_name(np, "regulator-state-disk");
+	if (state)
+		set_regulator_state_constraints(state,
+				&constraints->state_disk);
+
+	state = of_find_node_by_name(np, "regulator-state-standby");
+	if (state)
+		set_regulator_state_constraints(state,
+				&constraints->state_standby);
 }
 
 /**
-- 
1.7.0.4èº{.nÇ+‰·Ÿ®‰­†+%ŠËlzwm…éb?맲æìr¸›zX§»®w¥Š{ayºʇڙë,j­¢f£¢·hš‹àz¹®w¥¢¸¢·¦j:+v‰¨ŠwèjØm¶Ÿÿ¾«‘êçzZ+ƒùšŽŠÝ¢j"?ú!¶iO•æ¬z·švØ^¶m§ÿðÃnÆŠàþY&—