RE: [PATCH v2] Adding hyperv.h to uapi headers

From: KY Srinivasan
Date: Sun Jan 19 2014 - 12:46:48 EST

Next message: wiebittewas: "3.10.27: BUG on accessing /proc under high load"
Previous message: Greg KH: "Re: [PATCH] clk: export __clk_get_hw for re-use in others"
In reply to: Bjarke Istrup Pedersen: "Re: [PATCH v2] Adding hyperv.h to uapi headers"
Next in thread: Bjarke Istrup Pedersen: "Re: [PATCH v2] Adding hyperv.h to uapi headers"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

> -----Original Message-----
> From: gurligebis@xxxxxxxxx [mailto:gurligebis@xxxxxxxxx] On Behalf Of Bjarke
> Istrup Pedersen
> Sent: Sunday, January 19, 2014 2:15 AM
> To: KY Srinivasan
> Cc: Linux Kernel Mailing List; Haiyang Zhang
> Subject: Re: [PATCH v2] Adding hyperv.h to uapi headers
>
> 2014/1/19 KY Srinivasan <kys@xxxxxxxxxxxxx>:
> >
> >
> >> -----Original Message-----
> >> From: gurligebis@xxxxxxxxx [mailto:gurligebis@xxxxxxxxx] On Behalf Of
> Bjarke
> >> Istrup Pedersen
> >> Sent: Saturday, January 18, 2014 4:23 PM
> >> To: Linux Kernel Mailing List
> >> Cc: Haiyang Zhang; KY Srinivasan; Bjarke Istrup Pedersen
> >> Subject: Re: [PATCH v2] Adding hyperv.h to uapi headers
> >>
> >> Could any of you Hyper-V developers take a look at this, and see if
> >> this split makes sense to you?
> >
> > Have you compiled the hyper-v drivers with your change. I briefly looked at
> your
> > latest patch but I did not see an include of the user level hyper-V driver in the
> kernel
> > version of the header; or did I miss it. Please compile the drivers and the
> tools/hv/
> > user level daemons to test your patch.
>
> Hey,
>
> I have compiled it, and both the drivers and the userspace deamons
> builds fine :)
> If you look at the patch, on line 134, it includes the uapi header.
>
> Also, which parts of the uapi version header would you like me to move
> to the kernel version? (I'll create a new patch then, with your
> suggestions)

Which version information are you referring to. I would keep all version information
in the uapi hyperv.h header file. The kernel needs to handle older versions of the daemons.

Regards,

K. Y
>
> /Bjarke
>
> > K. Y
> >>
> >> Thanks :)
> >>
> >> /Bjarke
> >>
> >> 2014/1/19 Bjarke Istrup Pedersen <gurligebis@xxxxxxxxxx>:
> >> > This patch adds the hyperv.h header to the uapi folder, and adds it to the
> Kbuild
> >> file.
> >> > Doing this enables compiling userspace Hyper-V tools using the installed
> >> headers.
> >> >
> >> > Version 2: Split UAPI parts into new header, instead of duplicating.
> >> >
> >> > Signed-off-by: Bjarke Istrup Pedersen <gurligebis@xxxxxxxxxx>
> >> > ---
> >> > include/linux/hyperv.h | 321 +----------------------------------------
> >> > include/uapi/linux/Kbuild | 1 +
> >> > include/uapi/linux/hyperv.h | 344
> >> ++++++++++++++++++++++++++++++++++++++++++++
> >> > 3 files changed, 347 insertions(+), 319 deletions(-)
> >> > create mode 100644 include/uapi/linux/hyperv.h
> >> >
> >> > diff --git a/include/linux/hyperv.h b/include/linux/hyperv.h
> >> > index 15da677..167ef47 100644
> >> > --- a/include/linux/hyperv.h
> >> > +++ b/include/linux/hyperv.h
> >> > @@ -25,325 +25,9 @@
> >> > #ifndef _HYPERV_H
> >> > #define _HYPERV_H
> >> >
> >> > -#include <linux/types.h>
> >> > -
> >> > -/*
> >> > - * Framework version for util services.
> >> > - */
> >> > -#define UTIL_FW_MINOR 0
> >> > -
> >> > -#define UTIL_WS2K8_FW_MAJOR 1
> >> > -#define UTIL_WS2K8_FW_VERSION (UTIL_WS2K8_FW_MAJOR << 16 |
> >> UTIL_FW_MINOR)
> >> > -
> >> > -#define UTIL_FW_MAJOR 3
> >> > -#define UTIL_FW_VERSION (UTIL_FW_MAJOR << 16 | UTIL_FW_MINOR)
> >> > -
> >> > -
> >> > -/*
> >> > - * Implementation of host controlled snapshot of the guest.
> >> > - */
> >> > -
> >> > -#define VSS_OP_REGISTER 128
> >> > -
> >> > -enum hv_vss_op {
> >> > - VSS_OP_CREATE = 0,
> >> > - VSS_OP_DELETE,
> >> > - VSS_OP_HOT_BACKUP,
> >> > - VSS_OP_GET_DM_INFO,
> >> > - VSS_OP_BU_COMPLETE,
> >> > - /*
> >> > - * Following operations are only supported with IC version >= 5.0
> >> > - */
> >> > - VSS_OP_FREEZE, /* Freeze the file systems in the VM */
> >> > - VSS_OP_THAW, /* Unfreeze the file systems */
> >> > - VSS_OP_AUTO_RECOVER,
> >> > - VSS_OP_COUNT /* Number of operations, must be last */
> >> > -};
> >> > -
> >> > -
> >> > -/*
> >> > - * Header for all VSS messages.
> >> > - */
> >> > -struct hv_vss_hdr {
> >> > - __u8 operation;
> >> > - __u8 reserved[7];
> >> > -} __attribute__((packed));
> >> > -
> >> > -
> >> > -/*
> >> > - * Flag values for the hv_vss_check_feature. Linux supports only
> >> > - * one value.
> >> > - */
> >> > -#define VSS_HBU_NO_AUTO_RECOVERY 0x00000005
> >> > -
> >> > -struct hv_vss_check_feature {
> >> > - __u32 flags;
> >> > -} __attribute__((packed));
> >> > -
> >> > -struct hv_vss_check_dm_info {
> >> > - __u32 flags;
> >> > -} __attribute__((packed));
> >> > -
> >> > -struct hv_vss_msg {
> >> > - union {
> >> > - struct hv_vss_hdr vss_hdr;
> >> > - int error;
> >> > - };
> >> > - union {
> >> > - struct hv_vss_check_feature vss_cf;
> >> > - struct hv_vss_check_dm_info dm_info;
> >> > - };
> >> > -} __attribute__((packed));
> >> > -
> >> > -/*
> >> > - * An implementation of HyperV key value pair (KVP) functionality for Linux.
> >> > - *
> >> > - *
> >> > - * Copyright (C) 2010, Novell, Inc.
> >> > - * Author : K. Y. Srinivasan <ksrinivasan@xxxxxxxxxx>
> >> > - *
> >> > - */
> >> > -
> >> > -/*
> >> > - * Maximum value size - used for both key names and value data, and
> includes
> >> > - * any applicable NULL terminators.
> >> > - *
> >> > - * Note: This limit is somewhat arbitrary, but falls easily within what is
> >> > - * supported for all native guests (back to Win 2000) and what is reasonable
> >> > - * for the IC KVP exchange functionality. Note that Windows Me/98/95 are
> >> > - * limited to 255 character key names.
> >> > - *
> >> > - * MSDN recommends not storing data values larger than 2048 bytes in the
> >> > - * registry.
> >> > - *
> >> > - * Note: This value is used in defining the KVP exchange message - this
> value
> >> > - * cannot be modified without affecting the message size and compatibility.
> >> > - */
> >> > -
> >> > -/*
> >> > - * bytes, including any null terminators
> >> > - */
> >> > -#define HV_KVP_EXCHANGE_MAX_VALUE_SIZE (2048)
> >> > -
> >> > -
> >> > -/*
> >> > - * Maximum key size - the registry limit for the length of an entry name
> >> > - * is 256 characters, including the null terminator
> >> > - */
> >> > -
> >> > -#define HV_KVP_EXCHANGE_MAX_KEY_SIZE (512)
> >> > +#include <uapi/linux/hyperv.h>
> >> >
> >> > -/*
> >> > - * In Linux, we implement the KVP functionality in two components:
> >> > - * 1) The kernel component which is packaged as part of the hv_utils driver
> >> > - * is responsible for communicating with the host and responsible for
> >> > - * implementing the host/guest protocol. 2) A user level daemon that is
> >> > - * responsible for data gathering.
> >> > - *
> >> > - * Host/Guest Protocol: The host iterates over an index and expects the
> guest
> >> > - * to assign a key name to the index and also return the value
> corresponding to
> >> > - * the key. The host will have atmost one KVP transaction outstanding at
> any
> >> > - * given point in time. The host side iteration stops when the guest returns
> >> > - * an error. Microsoft has specified the following mapping of key names to
> >> > - * host specified index:
> >> > - *
> >> > - * Index Key Name
> >> > - * 0 FullyQualifiedDomainName
> >> > - * 1 IntegrationServicesVersion
> >> > - * 2 NetworkAddressIPv4
> >> > - * 3 NetworkAddressIPv6
> >> > - * 4 OSBuildNumber
> >> > - * 5 OSName
> >> > - * 6 OSMajorVersion
> >> > - * 7 OSMinorVersion
> >> > - * 8 OSVersion
> >> > - * 9 ProcessorArchitecture
> >> > - *
> >> > - * The Windows host expects the Key Name and Key Value to be encoded
> in
> >> utf16.
> >> > - *
> >> > - * Guest Kernel/KVP Daemon Protocol: As noted earlier, we implement all
> of
> >> the
> >> > - * data gathering functionality in a user mode daemon. The user level
> daemon
> >> > - * is also responsible for binding the key name to the index as well. The
> >> > - * kernel and user-level daemon communicate using a connector channel.
> >> > - *
> >> > - * The user mode component first registers with the
> >> > - * the kernel component. Subsequently, the kernel component requests,
> data
> >> > - * for the specified keys. In response to this message the user mode
> >> component
> >> > - * fills in the value corresponding to the specified key. We overload the
> >> > - * sequence field in the cn_msg header to define our KVP message types.
> >> > - *
> >> > - *
> >> > - * The kernel component simply acts as a conduit for communication
> between
> >> the
> >> > - * Windows host and the user-level daemon. The kernel component passes
> up
> >> the
> >> > - * index received from the Host to the user-level daemon. If the index is
> >> > - * valid (supported), the corresponding key as well as its
> >> > - * value (both are strings) is returned. If the index is invalid
> >> > - * (not supported), a NULL key string is returned.
> >> > - */
> >> > -
> >> > -
> >> > -/*
> >> > - * Registry value types.
> >> > - */
> >> > -
> >> > -#define REG_SZ 1
> >> > -#define REG_U32 4
> >> > -#define REG_U64 8
> >> > -
> >> > -/*
> >> > - * As we look at expanding the KVP functionality to include
> >> > - * IP injection functionality, we need to maintain binary
> >> > - * compatibility with older daemons.
> >> > - *
> >> > - * The KVP opcodes are defined by the host and it was unfortunate
> >> > - * that I chose to treat the registration operation as part of the
> >> > - * KVP operations defined by the host.
> >> > - * Here is the level of compatibility
> >> > - * (between the user level daemon and the kernel KVP driver) that we
> >> > - * will implement:
> >> > - *
> >> > - * An older daemon will always be supported on a newer driver.
> >> > - * A given user level daemon will require a minimal version of the
> >> > - * kernel driver.
> >> > - * If we cannot handle the version differences, we will fail gracefully
> >> > - * (this can happen when we have a user level daemon that is more
> >> > - * advanced than the KVP driver.
> >> > - *
> >> > - * We will use values used in this handshake for determining if we have
> >> > - * workable user level daemon and the kernel driver. We begin by taking
> the
> >> > - * registration opcode out of the KVP opcode namespace. We will however,
> >> > - * maintain compatibility with the existing user-level daemon code.
> >> > - */
> >> > -
> >> > -/*
> >> > - * Daemon code not supporting IP injection (legacy daemon).
> >> > - */
> >> > -
> >> > -#define KVP_OP_REGISTER 4
> >> > -
> >> > -/*
> >> > - * Daemon code supporting IP injection.
> >> > - * The KVP opcode field is used to communicate the
> >> > - * registration information; so define a namespace that
> >> > - * will be distinct from the host defined KVP opcode.
> >> > - */
> >> > -
> >> > -#define KVP_OP_REGISTER1 100
> >> > -
> >> > -enum hv_kvp_exchg_op {
> >> > - KVP_OP_GET = 0,
> >> > - KVP_OP_SET,
> >> > - KVP_OP_DELETE,
> >> > - KVP_OP_ENUMERATE,
> >> > - KVP_OP_GET_IP_INFO,
> >> > - KVP_OP_SET_IP_INFO,
> >> > - KVP_OP_COUNT /* Number of operations, must be last. */
> >> > -};
> >> > -
> >> > -enum hv_kvp_exchg_pool {
> >> > - KVP_POOL_EXTERNAL = 0,
> >> > - KVP_POOL_GUEST,
> >> > - KVP_POOL_AUTO,
> >> > - KVP_POOL_AUTO_EXTERNAL,
> >> > - KVP_POOL_AUTO_INTERNAL,
> >> > - KVP_POOL_COUNT /* Number of pools, must be last. */
> >> > -};
> >> > -
> >> > -/*
> >> > - * Some Hyper-V status codes.
> >> > - */
> >> > -
> >> > -#define HV_S_OK 0x00000000
> >> > -#define HV_E_FAIL 0x80004005
> >> > -#define HV_S_CONT 0x80070103
> >> > -#define HV_ERROR_NOT_SUPPORTED 0x80070032
> >> > -#define HV_ERROR_MACHINE_LOCKED 0x800704F7
> >> > -#define HV_ERROR_DEVICE_NOT_CONNECTED 0x8007048F
> >> > -#define HV_INVALIDARG 0x80070057
> >> > -#define HV_GUID_NOTFOUND 0x80041002
> >> > -
> >> > -#define ADDR_FAMILY_NONE 0x00
> >> > -#define ADDR_FAMILY_IPV4 0x01
> >> > -#define ADDR_FAMILY_IPV6 0x02
> >> > -
> >> > -#define MAX_ADAPTER_ID_SIZE 128
> >> > -#define MAX_IP_ADDR_SIZE 1024
> >> > -#define MAX_GATEWAY_SIZE 512
> >> > -
> >> > -
> >> > -struct hv_kvp_ipaddr_value {
> >> > - __u16 adapter_id[MAX_ADAPTER_ID_SIZE];
> >> > - __u8 addr_family;
> >> > - __u8 dhcp_enabled;
> >> > - __u16 ip_addr[MAX_IP_ADDR_SIZE];
> >> > - __u16 sub_net[MAX_IP_ADDR_SIZE];
> >> > - __u16 gate_way[MAX_GATEWAY_SIZE];
> >> > - __u16 dns_addr[MAX_IP_ADDR_SIZE];
> >> > -} __attribute__((packed));
> >> > -
> >> > -
> >> > -struct hv_kvp_hdr {
> >> > - __u8 operation;
> >> > - __u8 pool;
> >> > - __u16 pad;
> >> > -} __attribute__((packed));
> >> > -
> >> > -struct hv_kvp_exchg_msg_value {
> >> > - __u32 value_type;
> >> > - __u32 key_size;
> >> > - __u32 value_size;
> >> > - __u8 key[HV_KVP_EXCHANGE_MAX_KEY_SIZE];
> >> > - union {
> >> > - __u8 value[HV_KVP_EXCHANGE_MAX_VALUE_SIZE];
> >> > - __u32 value_u32;
> >> > - __u64 value_u64;
> >> > - };
> >> > -} __attribute__((packed));
> >> > -
> >> > -struct hv_kvp_msg_enumerate {
> >> > - __u32 index;
> >> > - struct hv_kvp_exchg_msg_value data;
> >> > -} __attribute__((packed));
> >> > -
> >> > -struct hv_kvp_msg_get {
> >> > - struct hv_kvp_exchg_msg_value data;
> >> > -};
> >> > -
> >> > -struct hv_kvp_msg_set {
> >> > - struct hv_kvp_exchg_msg_value data;
> >> > -};
> >> > -
> >> > -struct hv_kvp_msg_delete {
> >> > - __u32 key_size;
> >> > - __u8 key[HV_KVP_EXCHANGE_MAX_KEY_SIZE];
> >> > -};
> >> > -
> >> > -struct hv_kvp_register {
> >> > - __u8 version[HV_KVP_EXCHANGE_MAX_KEY_SIZE];
> >> > -};
> >> > -
> >> > -struct hv_kvp_msg {
> >> > - union {
> >> > - struct hv_kvp_hdr kvp_hdr;
> >> > - int error;
> >> > - };
> >> > - union {
> >> > - struct hv_kvp_msg_get kvp_get;
> >> > - struct hv_kvp_msg_set kvp_set;
> >> > - struct hv_kvp_msg_delete kvp_delete;
> >> > - struct hv_kvp_msg_enumerate kvp_enum_data;
> >> > - struct hv_kvp_ipaddr_value kvp_ip_val;
> >> > - struct hv_kvp_register kvp_register;
> >> > - } body;
> >> > -} __attribute__((packed));
> >> > -
> >> > -struct hv_kvp_ip_msg {
> >> > - __u8 operation;
> >> > - __u8 pool;
> >> > - struct hv_kvp_ipaddr_value kvp_ip_val;
> >> > -} __attribute__((packed));
> >> > -
> >> > -#ifdef __KERNEL__
> >> > +#include <linux/types.h>
> >> > #include <linux/scatterlist.h>
> >> > #include <linux/list.h>
> >> > #include <linux/uuid.h>
> >> > @@ -1465,5 +1149,4 @@ void hv_vss_onchannelcallback(void *);
> >> >
> >> > extern __u32 vmbus_proto_version;
> >> >
> >> > -#endif /* __KERNEL__ */
> >> > #endif /* _HYPERV_H */
> >> > diff --git a/include/uapi/linux/Kbuild b/include/uapi/linux/Kbuild
> >> > index 33d2b8f..6389736 100644
> >> > --- a/include/uapi/linux/Kbuild
> >> > +++ b/include/uapi/linux/Kbuild
> >> > @@ -139,6 +139,7 @@ header-y += hid.h
> >> > header-y += hiddev.h
> >> > header-y += hidraw.h
> >> > header-y += hpet.h
> >> > +header-y += hyperv.h
> >> > header-y += hysdn_if.h
> >> > header-y += i2c-dev.h
> >> > header-y += i2c.h
> >> > diff --git a/include/uapi/linux/hyperv.h b/include/uapi/linux/hyperv.h
> >> > new file mode 100644
> >> > index 0000000..1861f8e
> >> > --- /dev/null
> >> > +++ b/include/uapi/linux/hyperv.h
> >> > @@ -0,0 +1,344 @@
> >> > +/*
> >> > + *
> >> > + * Copyright (c) 2011, Microsoft Corporation.
> >> > + *
> >> > + * This program is free software; you can redistribute it and/or modify it
> >> > + * under the terms and conditions of the GNU General Public License,
> >> > + * version 2, as published by the Free Software Foundation.
> >> > + *
> >> > + * This program is distributed in the hope it will be useful, but WITHOUT
> >> > + * ANY WARRANTY; without even the implied warranty of
> MERCHANTABILITY
> >> or
> >> > + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
> License
> >> for
> >> > + * more details.
> >> > + *
> >> > + * You should have received a copy of the GNU General Public License
> along
> >> with
> >> > + * this program; if not, write to the Free Software Foundation, Inc., 59
> Temple
> >> > + * Place - Suite 330, Boston, MA 02111-1307 USA.
> >> > + *
> >> > + * Authors:
> >> > + * Haiyang Zhang <haiyangz@xxxxxxxxxxxxx>
> >> > + * Hank Janssen <hjanssen@xxxxxxxxxxxxx>
> >> > + * K. Y. Srinivasan <kys@xxxxxxxxxxxxx>
> >> > + *
> >> > + */
> >> > +
> >> > +#ifndef _UAPI_HYPERV_H
> >> > +#define _UAPI_HYPERV_H
> >> > +
> >> > +/*
> >> > + * Framework version for util services.
> >> > + */
> >> > +#define UTIL_FW_MINOR 0
> >> > +
> >> > +#define UTIL_WS2K8_FW_MAJOR 1
> >> > +#define UTIL_WS2K8_FW_VERSION (UTIL_WS2K8_FW_MAJOR << 16 |
> >> UTIL_FW_MINOR)
> >> > +
> >> > +#define UTIL_FW_MAJOR 3
> >> > +#define UTIL_FW_VERSION (UTIL_FW_MAJOR << 16 |
> UTIL_FW_MINOR)
> >> > +
> >> > +
> >> > +/*
> >> > + * Implementation of host controlled snapshot of the guest.
> >> > + */
> >> > +
> >> > +#define VSS_OP_REGISTER 128
> >> > +
> >> > +enum hv_vss_op {
> >> > + VSS_OP_CREATE = 0,
> >> > + VSS_OP_DELETE,
> >> > + VSS_OP_HOT_BACKUP,
> >> > + VSS_OP_GET_DM_INFO,
> >> > + VSS_OP_BU_COMPLETE,
> >> > + /*
> >> > + * Following operations are only supported with IC version >= 5.0
> >> > + */
> >> > + VSS_OP_FREEZE, /* Freeze the file systems in the VM */
> >> > + VSS_OP_THAW, /* Unfreeze the file systems */
> >> > + VSS_OP_AUTO_RECOVER,
> >> > + VSS_OP_COUNT /* Number of operations, must be last */
> >> > +};
> >> > +
> >> > +
> >> > +/*
> >> > + * Header for all VSS messages.
> >> > + */
> >> > +struct hv_vss_hdr {
> >> > + __u8 operation;
> >> > + __u8 reserved[7];
> >> > +} __attribute__((packed));
> >> > +
> >> > +
> >> > +/*
> >> > + * Flag values for the hv_vss_check_feature. Linux supports only
> >> > + * one value.
> >> > + */
> >> > +#define VSS_HBU_NO_AUTO_RECOVERY 0x00000005
> >> > +
> >> > +struct hv_vss_check_feature {
> >> > + __u32 flags;
> >> > +} __attribute__((packed));
> >> > +
> >> > +struct hv_vss_check_dm_info {
> >> > + __u32 flags;
> >> > +} __attribute__((packed));
> >> > +
> >> > +struct hv_vss_msg {
> >> > + union {
> >> > + struct hv_vss_hdr vss_hdr;
> >> > + int error;
> >> > + };
> >> > + union {
> >> > + struct hv_vss_check_feature vss_cf;
> >> > + struct hv_vss_check_dm_info dm_info;
> >> > + };
> >> > +} __attribute__((packed));
> >> > +
> >> > +/*
> >> > + * An implementation of HyperV key value pair (KVP) functionality for
> Linux.
> >> > + *
> >> > + *
> >> > + * Copyright (C) 2010, Novell, Inc.
> >> > + * Author : K. Y. Srinivasan <ksrinivasan@xxxxxxxxxx>
> >> > + *
> >> > + */
> >> > +
> >> > +/*
> >> > + * Maximum value size - used for both key names and value data, and
> includes
> >> > + * any applicable NULL terminators.
> >> > + *
> >> > + * Note: This limit is somewhat arbitrary, but falls easily within what is
> >> > + * supported for all native guests (back to Win 2000) and what is reasonable
> >> > + * for the IC KVP exchange functionality. Note that Windows Me/98/95 are
> >> > + * limited to 255 character key names.
> >> > + *
> >> > + * MSDN recommends not storing data values larger than 2048 bytes in the
> >> > + * registry.
> >> > + *
> >> > + * Note: This value is used in defining the KVP exchange message - this
> value
> >> > + * cannot be modified without affecting the message size and
> compatibility.
> >> > + */
> >> > +
> >> > +/*
> >> > + * bytes, including any null terminators
> >> > + */
> >> > +#define HV_KVP_EXCHANGE_MAX_VALUE_SIZE (2048)
> >> > +
> >> > +
> >> > +/*
> >> > + * Maximum key size - the registry limit for the length of an entry name
> >> > + * is 256 characters, including the null terminator
> >> > + */
> >> > +
> >> > +#define HV_KVP_EXCHANGE_MAX_KEY_SIZE (512)
> >> > +
> >> > +/*
> >> > + * In Linux, we implement the KVP functionality in two components:
> >> > + * 1) The kernel component which is packaged as part of the hv_utils driver
> >> > + * is responsible for communicating with the host and responsible for
> >> > + * implementing the host/guest protocol. 2) A user level daemon that is
> >> > + * responsible for data gathering.
> >> > + *
> >> > + * Host/Guest Protocol: The host iterates over an index and expects the
> guest
> >> > + * to assign a key name to the index and also return the value
> corresponding
> >> to
> >> > + * the key. The host will have atmost one KVP transaction outstanding at
> any
> >> > + * given point in time. The host side iteration stops when the guest returns
> >> > + * an error. Microsoft has specified the following mapping of key names to
> >> > + * host specified index:
> >> > + *
> >> > + * Index Key Name
> >> > + * 0 FullyQualifiedDomainName
> >> > + * 1 IntegrationServicesVersion
> >> > + * 2 NetworkAddressIPv4
> >> > + * 3 NetworkAddressIPv6
> >> > + * 4 OSBuildNumber
> >> > + * 5 OSName
> >> > + * 6 OSMajorVersion
> >> > + * 7 OSMinorVersion
> >> > + * 8 OSVersion
> >> > + * 9 ProcessorArchitecture
> >> > + *
> >> > + * The Windows host expects the Key Name and Key Value to be encoded
> in
> >> utf16.
> >> > + *
> >> > + * Guest Kernel/KVP Daemon Protocol: As noted earlier, we implement all
> of
> >> the
> >> > + * data gathering functionality in a user mode daemon. The user level
> daemon
> >> > + * is also responsible for binding the key name to the index as well. The
> >> > + * kernel and user-level daemon communicate using a connector channel.
> >> > + *
> >> > + * The user mode component first registers with the
> >> > + * the kernel component. Subsequently, the kernel component requests,
> data
> >> > + * for the specified keys. In response to this message the user mode
> >> component
> >> > + * fills in the value corresponding to the specified key. We overload the
> >> > + * sequence field in the cn_msg header to define our KVP message types.
> >> > + *
> >> > + *
> >> > + * The kernel component simply acts as a conduit for communication
> between
> >> the
> >> > + * Windows host and the user-level daemon. The kernel component
> passes
> >> up the
> >> > + * index received from the Host to the user-level daemon. If the index is
> >> > + * valid (supported), the corresponding key as well as its
> >> > + * value (both are strings) is returned. If the index is invalid
> >> > + * (not supported), a NULL key string is returned.
> >> > + */
> >> > +
> >> > +
> >> > +/*
> >> > + * Registry value types.
> >> > + */
> >> > +
> >> > +#define REG_SZ 1
> >> > +#define REG_U32 4
> >> > +#define REG_U64 8
> >> > +
> >> > +/*
> >> > + * As we look at expanding the KVP functionality to include
> >> > + * IP injection functionality, we need to maintain binary
> >> > + * compatibility with older daemons.
> >> > + *
> >> > + * The KVP opcodes are defined by the host and it was unfortunate
> >> > + * that I chose to treat the registration operation as part of the
> >> > + * KVP operations defined by the host.
> >> > + * Here is the level of compatibility
> >> > + * (between the user level daemon and the kernel KVP driver) that we
> >> > + * will implement:
> >> > + *
> >> > + * An older daemon will always be supported on a newer driver.
> >> > + * A given user level daemon will require a minimal version of the
> >> > + * kernel driver.
> >> > + * If we cannot handle the version differences, we will fail gracefully
> >> > + * (this can happen when we have a user level daemon that is more
> >> > + * advanced than the KVP driver.
> >> > + *
> >> > + * We will use values used in this handshake for determining if we have
> >> > + * workable user level daemon and the kernel driver. We begin by taking
> the
> >> > + * registration opcode out of the KVP opcode namespace. We will
> however,
> >> > + * maintain compatibility with the existing user-level daemon code.
> >> > + */
> >> > +
> >> > +/*
> >> > + * Daemon code not supporting IP injection (legacy daemon).
> >> > + */
> >> > +
> >> > +#define KVP_OP_REGISTER 4
> >> > +
> >> > +/*
> >> > + * Daemon code supporting IP injection.
> >> > + * The KVP opcode field is used to communicate the
> >> > + * registration information; so define a namespace that
> >> > + * will be distinct from the host defined KVP opcode.
> >> > + */
> >> > +
> >> > +#define KVP_OP_REGISTER1 100
> >> > +
> >> > +enum hv_kvp_exchg_op {
> >> > + KVP_OP_GET = 0,
> >> > + KVP_OP_SET,
> >> > + KVP_OP_DELETE,
> >> > + KVP_OP_ENUMERATE,
> >> > + KVP_OP_GET_IP_INFO,
> >> > + KVP_OP_SET_IP_INFO,
> >> > + KVP_OP_COUNT /* Number of operations, must be last. */
> >> > +};
> >> > +
> >> > +enum hv_kvp_exchg_pool {
> >> > + KVP_POOL_EXTERNAL = 0,
> >> > + KVP_POOL_GUEST,
> >> > + KVP_POOL_AUTO,
> >> > + KVP_POOL_AUTO_EXTERNAL,
> >> > + KVP_POOL_AUTO_INTERNAL,
> >> > + KVP_POOL_COUNT /* Number of pools, must be last. */
> >> > +};
> >> > +
> >> > +/*
> >> > + * Some Hyper-V status codes.
> >> > + */
> >> > +
> >> > +#define HV_S_OK 0x00000000
> >> > +#define HV_E_FAIL 0x80004005
> >> > +#define HV_S_CONT 0x80070103
> >> > +#define HV_ERROR_NOT_SUPPORTED 0x80070032
> >> > +#define HV_ERROR_MACHINE_LOCKED 0x800704F7
> >> > +#define HV_ERROR_DEVICE_NOT_CONNECTED 0x8007048F
> >> > +#define HV_INVALIDARG 0x80070057
> >> > +#define HV_GUID_NOTFOUND 0x80041002
> >> > +
> >> > +#define ADDR_FAMILY_NONE 0x00
> >> > +#define ADDR_FAMILY_IPV4 0x01
> >> > +#define ADDR_FAMILY_IPV6 0x02
> >> > +
> >> > +#define MAX_ADAPTER_ID_SIZE 128
> >> > +#define MAX_IP_ADDR_SIZE 1024
> >> > +#define MAX_GATEWAY_SIZE 512
> >> > +
> >> > +
> >> > +struct hv_kvp_ipaddr_value {
> >> > + __u16 adapter_id[MAX_ADAPTER_ID_SIZE];
> >> > + __u8 addr_family;
> >> > + __u8 dhcp_enabled;
> >> > + __u16 ip_addr[MAX_IP_ADDR_SIZE];
> >> > + __u16 sub_net[MAX_IP_ADDR_SIZE];
> >> > + __u16 gate_way[MAX_GATEWAY_SIZE];
> >> > + __u16 dns_addr[MAX_IP_ADDR_SIZE];
> >> > +} __attribute__((packed));
> >> > +
> >> > +
> >> > +struct hv_kvp_hdr {
> >> > + __u8 operation;
> >> > + __u8 pool;
> >> > + __u16 pad;
> >> > +} __attribute__((packed));
> >> > +
> >> > +struct hv_kvp_exchg_msg_value {
> >> > + __u32 value_type;
> >> > + __u32 key_size;
> >> > + __u32 value_size;
> >> > + __u8 key[HV_KVP_EXCHANGE_MAX_KEY_SIZE];
> >> > + union {
> >> > + __u8 value[HV_KVP_EXCHANGE_MAX_VALUE_SIZE];
> >> > + __u32 value_u32;
> >> > + __u64 value_u64;
> >> > + };
> >> > +} __attribute__((packed));
> >> > +
> >> > +struct hv_kvp_msg_enumerate {
> >> > + __u32 index;
> >> > + struct hv_kvp_exchg_msg_value data;
> >> > +} __attribute__((packed));
> >> > +
> >> > +struct hv_kvp_msg_get {
> >> > + struct hv_kvp_exchg_msg_value data;
> >> > +};
> >> > +
> >> > +struct hv_kvp_msg_set {
> >> > + struct hv_kvp_exchg_msg_value data;
> >> > +};
> >> > +
> >> > +struct hv_kvp_msg_delete {
> >> > + __u32 key_size;
> >> > + __u8 key[HV_KVP_EXCHANGE_MAX_KEY_SIZE];
> >> > +};
> >> > +
> >> > +struct hv_kvp_register {
> >> > + __u8 version[HV_KVP_EXCHANGE_MAX_KEY_SIZE];
> >> > +};
> >> > +
> >> > +struct hv_kvp_msg {
> >> > + union {
> >> > + struct hv_kvp_hdr kvp_hdr;
> >> > + int error;
> >> > + };
> >> > + union {
> >> > + struct hv_kvp_msg_get kvp_get;
> >> > + struct hv_kvp_msg_set kvp_set;
> >> > + struct hv_kvp_msg_delete kvp_delete;
> >> > + struct hv_kvp_msg_enumerate kvp_enum_data;
> >> > + struct hv_kvp_ipaddr_value kvp_ip_val;
> >> > + struct hv_kvp_register kvp_register;
> >> > + } body;
> >> > +} __attribute__((packed));
> >> > +
> >> > +struct hv_kvp_ip_msg {
> >> > + __u8 operation;
> >> > + __u8 pool;
> >> > + struct hv_kvp_ipaddr_value kvp_ip_val;
> >> > +} __attribute__((packed));
> >> > +
> >> > +#endif /* _UAPI_HYPERV_H */
> >> > --
> >> > 1.8.5.3
> >> >
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> > the body of a message to majordomo@xxxxxxxxxxxxxxx
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
> > Please read the FAQ at http://www.tux.org/lkml/
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: wiebittewas: "3.10.27: BUG on accessing /proc under high load"
Previous message: Greg KH: "Re: [PATCH] clk: export __clk_get_hw for re-use in others"
In reply to: Bjarke Istrup Pedersen: "Re: [PATCH v2] Adding hyperv.h to uapi headers"
Next in thread: Bjarke Istrup Pedersen: "Re: [PATCH v2] Adding hyperv.h to uapi headers"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]