[PATCH v4 2/2] usb: dwc3: adapt dwc3 core to use Generic PHY Framework
From: Kishon Vijay Abraham I
Date: Tue Jan 21 2014 - 05:12:40 EST
Adapted dwc3 core to use the Generic PHY Framework. So for init, exit,
power_on and power_off the following APIs are used phy_init(), phy_exit(),
phy_power_on() and phy_power_off().
However using the old USB phy library wont be removed till the PHYs of all
other SoC's using dwc3 core is adapted to the Generic PHY Framework.
Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
---
Changes from v3:
* avoided using quirks
Documentation/devicetree/bindings/usb/dwc3.txt | 6 ++-
drivers/usb/dwc3/core.c | 60 ++++++++++++++++++++++++
drivers/usb/dwc3/core.h | 7 +++
3 files changed, 71 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt
index e807635..471366d 100644
--- a/Documentation/devicetree/bindings/usb/dwc3.txt
+++ b/Documentation/devicetree/bindings/usb/dwc3.txt
@@ -6,11 +6,13 @@ Required properties:
- compatible: must be "snps,dwc3"
- reg : Address and length of the register set for the device
- interrupts: Interrupts used by the dwc3 controller.
+
+Optional properties:
- usb-phy : array of phandle for the PHY device. The first element
in the array is expected to be a handle to the USB2/HS PHY and
the second element is expected to be a handle to the USB3/SS PHY
-
-Optional properties:
+ - phys: from the *Generic PHY* bindings
+ - phy-names: from the *Generic PHY* bindings
- tx-fifo-resize: determines if the FIFO *has* to be reallocated.
This is usually a subnode to DWC3 glue to which it is connected.
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index e009d4e..036d589 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -82,6 +82,11 @@ static void dwc3_core_soft_reset(struct dwc3 *dwc)
usb_phy_init(dwc->usb2_phy);
usb_phy_init(dwc->usb3_phy);
+ if (dwc->usb2_generic_phy)
+ phy_init(dwc->usb2_generic_phy);
+ if (dwc->usb3_generic_phy)
+ phy_init(dwc->usb3_generic_phy);
+
mdelay(100);
/* Clear USB3 PHY reset */
@@ -343,6 +348,11 @@ static void dwc3_core_exit(struct dwc3 *dwc)
{
usb_phy_shutdown(dwc->usb2_phy);
usb_phy_shutdown(dwc->usb3_phy);
+ if (dwc->usb2_generic_phy)
+ phy_exit(dwc->usb2_generic_phy);
+ if (dwc->usb3_generic_phy)
+ phy_exit(dwc->usb3_generic_phy);
+
}
#define DWC3_ALIGN_MASK (16 - 1)
@@ -433,6 +443,32 @@ static int dwc3_probe(struct platform_device *pdev)
}
}
+ dwc->usb2_generic_phy = devm_phy_get(dev, "usb2-phy");
+ if (IS_ERR(dwc->usb2_generic_phy)) {
+ ret = PTR_ERR(dwc->usb2_generic_phy);
+ if (ret == -ENOSYS || ret == -ENODEV) {
+ dwc->usb2_generic_phy = NULL;
+ } else if (ret == -EPROBE_DEFER) {
+ return ret;
+ } else {
+ dev_err(dev, "no usb2 phy configured\n");
+ return ret;
+ }
+ }
+
+ dwc->usb3_generic_phy = devm_phy_get(dev, "usb3-phy");
+ if (IS_ERR(dwc->usb3_generic_phy)) {
+ ret = PTR_ERR(dwc->usb3_generic_phy);
+ if (ret == -ENOSYS || ret == -ENODEV) {
+ dwc->usb3_generic_phy = NULL;
+ } else if (ret == -EPROBE_DEFER) {
+ return ret;
+ } else {
+ dev_err(dev, "no usb3 phy configured\n");
+ return ret;
+ }
+ }
+
dwc->xhci_resources[0].start = res->start;
dwc->xhci_resources[0].end = dwc->xhci_resources[0].start +
DWC3_XHCI_REGS_END;
@@ -482,6 +518,11 @@ static int dwc3_probe(struct platform_device *pdev)
usb_phy_set_suspend(dwc->usb2_phy, 0);
usb_phy_set_suspend(dwc->usb3_phy, 0);
+ if (dwc->usb2_generic_phy)
+ phy_power_on(dwc->usb2_generic_phy);
+ if (dwc->usb3_generic_phy)
+ phy_power_on(dwc->usb3_generic_phy);
+
ret = dwc3_event_buffers_setup(dwc);
if (ret) {
dev_err(dwc->dev, "failed to setup event buffers\n");
@@ -565,6 +606,10 @@ err2:
err1:
usb_phy_set_suspend(dwc->usb2_phy, 1);
usb_phy_set_suspend(dwc->usb3_phy, 1);
+ if (dwc->usb2_generic_phy)
+ phy_power_off(dwc->usb2_generic_phy);
+ if (dwc->usb3_generic_phy)
+ phy_power_off(dwc->usb3_generic_phy);
dwc3_core_exit(dwc);
err0:
@@ -580,6 +625,11 @@ static int dwc3_remove(struct platform_device *pdev)
usb_phy_set_suspend(dwc->usb2_phy, 1);
usb_phy_set_suspend(dwc->usb3_phy, 1);
+ if (dwc->usb2_generic_phy)
+ phy_power_off(dwc->usb2_generic_phy);
+ if (dwc->usb3_generic_phy)
+ phy_power_off(dwc->usb3_generic_phy);
+
pm_runtime_put_sync(&pdev->dev);
pm_runtime_disable(&pdev->dev);
@@ -677,6 +727,11 @@ static int dwc3_suspend(struct device *dev)
usb_phy_shutdown(dwc->usb3_phy);
usb_phy_shutdown(dwc->usb2_phy);
+ if (dwc->usb2_generic_phy)
+ phy_exit(dwc->usb2_generic_phy);
+ if (dwc->usb3_generic_phy)
+ phy_exit(dwc->usb3_generic_phy);
+
return 0;
}
@@ -688,6 +743,11 @@ static int dwc3_resume(struct device *dev)
usb_phy_init(dwc->usb3_phy);
usb_phy_init(dwc->usb2_phy);
+ if (dwc->usb2_generic_phy)
+ phy_init(dwc->usb2_generic_phy);
+ if (dwc->usb3_generic_phy)
+ phy_init(dwc->usb3_generic_phy);
+
spin_lock_irqsave(&dwc->lock, flags);
dwc3_writel(dwc->regs, DWC3_GCTL, dwc->gctl);
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index f8af8d4..01ec7d7 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -31,6 +31,8 @@
#include <linux/usb/gadget.h>
#include <linux/usb/otg.h>
+#include <linux/phy/phy.h>
+
/* Global constants */
#define DWC3_EP0_BOUNCE_SIZE 512
#define DWC3_ENDPOINTS_NUM 32
@@ -613,6 +615,8 @@ struct dwc3_scratchpad_array {
* @dr_mode: requested mode of operation
* @usb2_phy: pointer to USB2 PHY
* @usb3_phy: pointer to USB3 PHY
+ * @usb2_generic_phy: pointer to USB2 PHY
+ * @usb3_generic_phy: pointer to USB3 PHY
* @dcfg: saved contents of DCFG register
* @gctl: saved contents of GCTL register
* @is_selfpowered: true when we are selfpowered
@@ -665,6 +669,9 @@ struct dwc3 {
struct usb_phy *usb2_phy;
struct usb_phy *usb3_phy;
+ struct phy *usb2_generic_phy;
+ struct phy *usb3_generic_phy;
+
void __iomem *regs;
size_t regs_size;
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/