[PATCH v5 6/8] ARM: brcmstb: add misc. DT bindings for brcmstb
From: Marc Carino
Date: Tue Jan 21 2014 - 22:31:34 EST
Document the bindings that the Broadcom STB platform needs
for proper bootup.
Signed-off-by: Marc Carino <marc.ceeeee@xxxxxxxxx>
Acked-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
---
.../devicetree/bindings/arm/brcm-brcmstb.txt | 95 ++++++++++++++++++++
1 files changed, 95 insertions(+), 0 deletions(-)
create mode 100644 Documentation/devicetree/bindings/arm/brcm-brcmstb.txt
diff --git a/Documentation/devicetree/bindings/arm/brcm-brcmstb.txt b/Documentation/devicetree/bindings/arm/brcm-brcmstb.txt
new file mode 100644
index 0000000..3c436cc
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/brcm-brcmstb.txt
@@ -0,0 +1,95 @@
+ARM Broadcom STB platforms Device Tree Bindings
+-----------------------------------------------
+Boards with Broadcom Brahma15 ARM-based BCMxxxx (generally BCM7xxx variants)
+SoC shall have the following DT organization:
+
+Required root node properties:
+ - compatible: "brcm,bcm<chip_id>", "brcm,brcmstb"
+
+example:
+/ {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ model = "Broadcom STB (bcm7445)";
+ compatible = "brcm,bcm7445", "brcm,brcmstb";
+
+Further, syscon nodes that map platform-specific registers used for general
+system control is required:
+
+ - compatible: "brcm,bcm<chip_id>-sun-top-ctrl", "syscon"
+ - compatible: "brcm,bcm<chip_id>-hif-cpubiuctrl", "syscon"
+ - compatible: "brcm,bcm<chip_id>-hif-continuation", "syscon"
+
+example:
+ rdb {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges = <0 0x00 0xf0000000 0x1000000>;
+
+ sun_top_ctrl: syscon@404000 {
+ compatible = "brcm,bcm7445-sun-top-ctrl", "syscon";
+ reg = <0x404000 0x51c>;
+ };
+
+ hif_cpubiuctrl: syscon@3e2400 {
+ compatible = "brcm,bcm7445-hif-cpubiuctrl", "syscon";
+ reg = <0x3e2400 0x5b4>;
+ };
+
+ hif_continuation: syscon@452000 {
+ compatible = "brcm,bcm7445-hif-continuation", "syscon";
+ reg = <0x452000 0x100>;
+ };
+ };
+
+Lastly, nodes that allow for support of SMP initialization and reboot are
+required:
+
+smpboot
+-------
+Required properties:
+
+ - compatible
+ The string "brcm,brcmstb-smpboot".
+
+ - syscon-cpu
+ A phandle / integer array property which lets the BSP know the location
+ of certain CPU power-on registers.
+
+ The layout of the property is as follows:
+ o a phandle to the "hif_cpubiuctrl" syscon node
+ o offset to the base CPU power zone register
+ o offset to the base CPU reset register
+
+ - syscon-cont
+ A phandle pointing to the syscon node which describes the CPU boot
+ continuation registers.
+ o a phandle to the "hif_continuation" syscon node
+
+example:
+ smpboot {
+ compatible = "brcm,brcmstb-smpboot";
+ syscon-cpu = <&hif_cpubiuctrl 0x88 0x178>;
+ syscon-cont = <&hif_continuation>;
+ };
+
+reboot
+-------
+Required properties
+
+ - compatible
+ The string property "brcm,brcmstb-reboot".
+
+ - syscon
+ A phandle / integer array that points to the syscon node which describes
+ the general system reset registers.
+ o a phandle to "sun_top_ctrl"
+ o offset to the "reset source enable" register
+ o offset to the "software master reset" register
+
+example:
+ reboot {
+ compatible = "brcm,brcmstb-reboot";
+ syscon = <&sun_top_ctrl 0x304 0x308>;
+ };
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/