Re: [PATCH] mtd: mtd_oobtest: fix verify errors due to incorrectuse of prandom_bytes_state()

[Lothar WaÃmann]

Hi,

Akinobu Mita wrote:
> 2014/1/22 Lothar WaÃmann <LW@xxxxxxxxxxxxxxxxxxx>:
> > Hi,
> >
> > Is anyone taking care of this?
> >
> > Lothar WaÃmann wrote:
> >> When using prandom_bytes_state() it is critical to use the same block
> >> size in all invocations that are to produce the same random sequence.
> >> Otherwise the state of the PRNG will be out of sync if the blocksize
> >> is not divisible by 4.
> >> This leads to bogus verification errors in several tests which use
> >> different block sizes to initialize the buffer for writing and
> >> comparison.
> >>
> >> Signed-off-by: Lothar WaÃmann <LW@xxxxxxxxxxxxxxxxxxx>
> >> ---
> >>  drivers/mtd/tests/oobtest.c |   14 ++++++++++++--
> >>  1 files changed, 12 insertions(+), 2 deletions(-)
> >>
> >> diff --git a/drivers/mtd/tests/oobtest.c b/drivers/mtd/tests/oobtest.c
> >> index 2e9e2d1..72c7359 100644
> >> --- a/drivers/mtd/tests/oobtest.c
> >> +++ b/drivers/mtd/tests/oobtest.c
> >> @@ -213,8 +213,15 @@ static int verify_eraseblock_in_one_go(int ebnum)
> >>       int err = 0;
> >>       loff_t addr = ebnum * mtd->erasesize;
> >>       size_t len = mtd->ecclayout->oobavail * pgcnt;
> >> +     int i;
> >> +
> >> +     for (i = 0; i < pgcnt; i++)
> >> +             prandom_bytes_state(&rnd_state, &writebuf[i * use_len],
> >> +                             use_len);
> >> +     if (len % use_len)
> >> +             prandom_bytes_state(&rnd_state, &writebuf[i * use_len],
> >> +                             len % use_len);
> >>
> >> -     prandom_bytes_state(&rnd_state, writebuf, len);
> >>       ops.mode      = MTD_OPS_AUTO_OOB;
> >>       ops.len       = 0;
> >>       ops.retlen    = 0;
> 
> I would rather fix the use of prandom_bytes_state() in write_eraseblock()
> than fix in verify_eraseblock_in_one_go().
> 
Why and how?
write_whole_device() (which calls write_eraseblock()) is used multiple
times with different verification methods (all blocks in one go or each
block individually).
If prandom_state_bytes() in write_eraseblock() would be changed, that
function would have to know, how the block are going to be checked
lateron to know how to set up the writebuffer.

Dto. for mtd_write_oob()


Lothar WaÃmann
-- 
___________________________________________________________

Ka-Ro electronics GmbH | PascalstraÃe 22 | D - 52076 Aachen
Phone: +49 2408 1402-0 | Fax: +49 2408 1402-10
GeschÃftsfÃhrer: Matthias Kaussen
Handelsregistereintrag: Amtsgericht Aachen, HRB 4996

www.karo-electronics.de | info@xxxxxxxxxxxxxxxxxxx
___________________________________________________________
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/