[PATCH 18/18] mfd: max14577: Add device tree bindings document

[Krzysztof Kozlowski]

Add document describing device tree bindings for MAX14577 MFD driver
(for both MAX14577 and MAX77836 chipsets).

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
Cc: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
Cc: Tomasz Figa <t.figa@xxxxxxxxxxx>
Cc: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
Cc: devicetree@xxxxxxxxxxxxxxx
Cc: Rob Herring <robh+dt@xxxxxxxxxx>
Cc: Pawel Moll <pawel.moll@xxxxxxx>
Cc: Mark Rutland <mark.rutland@xxxxxxx>
---
 Documentation/devicetree/bindings/mfd/max14577.txt |  104 ++++++++++++++++++++
 1 file changed, 104 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/max14577.txt

diff --git a/Documentation/devicetree/bindings/mfd/max14577.txt b/Documentation/devicetree/bindings/mfd/max14577.txt
new file mode 100644
index 000000000000..cb758f84be00
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/max14577.txt
@@ -0,0 +1,104 @@
+Maxim MAX14577/77836 Multi-Function Device
+
+MAX14577 is a Multi-Function Device with Micro-USB Interface Circuit, Li+
+Battery Charger and SFOUT LDO output for powering USB devices. It is
+interfaced to host controller using I2C.
+
+MAX77836 additionally contains PMIC (with two LDO regulators) and Fuel Gauge.
+
+
+Required properties:
+- compatible : Must be "maxim,max14577" or "maxim,max77836".
+- reg : I2C slave address for the max14577 chip (0x25 for max14577/max77836)
+- interrupts : IRQ line for the chip.
+- interrupt-parent :  The parent interrupt controller.
+
+
+Optional nodes:
+- max14577-muic/max77836-muic :
+	Node used only by extcon consumers.
+	Required properties:
+		- compatible : "maxim,max14577-muic" or "maxim,max77836-muic"
+
+- regulators :
+	Required properties:
+		- compatible : "maxim,max14577-regulator"
+			or "maxim,max77836-regulator"
+
+	May contain a sub-node per regulator from the list below. Each
+	sub-node should contain the constraints and initialization information
+	for that regulator. See regulator.txt for a description of standard
+	properties for these sub-nodes.
+
+	List of valid regulator names:
+	- for max14577: CHARGER, SAFEOUT.
+	- for max77836: CHARGER, SAFEOUT, LDO1, LDO2.
+
+	The SAFEOUT is a fixed voltage regulator so there is no need to specify
+	voltages for it.
+
+
+Example:
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+max14577@25 {
+	compatible = "maxim,max14577";
+	reg = <0x25>;
+	interrupt-parent = <&gpx1>;
+	interrupts = <5 IRQ_TYPE_NONE>;
+
+	muic: max14577-muic {
+		compatible = "maxim,max14577-muic";
+	};
+
+	regulators {
+		compatible = "maxim,max14577-regulator";
+
+		SAFEOUT {
+			regulator-name = "SAFEOUT";
+		};
+		CHARGER {
+			regulator-name = "CHARGER";
+			regulator-min-microamp = <90000>;
+			regulator-max-microamp = <950000>;
+			regulator-boot-on;
+		};
+	};
+};
+
+
+max77836@25 {
+	compatible = "maxim,max77836";
+	reg = <0x25>;
+	interrupt-parent = <&gpx1>;
+	interrupts = <5 IRQ_TYPE_NONE>;
+
+	muic: max77836-muic {
+		compatible = "maxim,max77836-muic";
+	};
+
+	regulators {
+		compatible = "maxim,max77836-regulator";
+
+		SAFEOUT {
+			regulator-name = "SAFEOUT";
+		};
+		CHARGER {
+			regulator-name = "CHARGER";
+			regulator-min-microamp = <90000>;
+			regulator-max-microamp = <950000>;
+			regulator-boot-on;
+		};
+		LDO1 {
+			regulator-name = "LDO1";
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+		LDO2 {
+			regulator-name = "LDO2";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <3950000>;
+		};
+	};
+};
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/