Re: Excessive WARN()s in Intel 915 driver

From: Alan Stern
Date: Tue Jan 28 2014 - 11:34:57 EST

Next message: Christoph Fritz: "[PATCH] ARM: dts: fix omap3 clock multiplier for dpll4_m2x2_ck"
Previous message: Felipe Balbi: "Re: [PATCH 1/2] usb: dwc3: core: continue probing if usb phy libraryreturns -ENODEV/-ENXIO"
In reply to: Alan Stern: "Re: Excessive WARN()s in Intel 915 driver"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Mon, 27 Jan 2014, Daniel Vetter wrote:

> On Tue, Jan 14, 2014 at 3:43 PM, Alan Stern <stern@xxxxxxxxxxxxxxxxxxx> wrote:
> > Don't bother. I'll redo it using the drm-intel-nightly branch, but I
> > won't have time for a few days.
>
> My apologies for the delay in getting around to this. Can you please
> test the patch i've just posted?
>
> http://patchwork.freedesktop.org/patch/18810/
>
> Thanks, Daniel

Attached are two boot-up logs, for comparison. The first is the
drm-intel-nightly branch without the new patch, and the second has the
patch applied.

Alan Stern
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.13.0-rc8AS+ (stern@xxxxxxxxxxxxxxxxxx) (gcc version 4.8.2 20131212 (Red Hat 4.8.2-7) (GCC) ) #1 SMP PREEMPT Mon Jan 27 21:27:12 EST 2014
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e1000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007dd9ffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007dda0000-0x000000007ddaefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007ddaf000-0x000000007dddffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007dde0000-0x000000007ddfffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed3ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: ASUSTeK Computer Inc. UL20A /UL20A , BIOS 207 11/02/2009
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x7dda0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07DE00000 mask FFFE00000 uncachable
[ 0.000000] 2 base 07E000000 mask FFE000000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2014MB, range: 2MB, type UC
[ 0.000000] reg 2, base: 2016MB, range: 32MB, type UC
[ 0.000000] total RAM covered: 2014M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 64M num_reg: 3 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2014MB, range: 2MB, type UC
[ 0.000000] reg 2, base: 2016MB, range: 32MB, type UC
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] initial memory mapped: [mem 0x00000000-0x013fffff]
[ 0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x36400000-0x367fffff]
[ 0.000000] [mem 0x36400000-0x367fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x30000000-0x363fffff]
[ 0.000000] [mem 0x30000000-0x363fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x2fffffff]
[ 0.000000] [mem 0x00100000-0x003fffff] page 4k
[ 0.000000] [mem 0x00400000-0x2fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x36800000-0x377fdfff]
[ 0.000000] [mem 0x36800000-0x373fffff] page 2M
[ 0.000000] [mem 0x37400000-0x377fdfff] page 4k
[ 0.000000] BRK [0x01053000, 0x01053fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x36a6a000-0x3752cfff]
[ 0.000000] ACPI: RSDP 000f9180 000024 (v02 110209)
[ 0.000000] ACPI: XSDT 7dda0100 00008C (v01 _ASUS_ Notebook 20091102 MSFT 00000097)
[ 0.000000] ACPI: FACP 7dda0290 0000F4 (v03 110209 FACP1000 20091102 MSFT 00000097)
[ 0.000000] ACPI: DSDT 7dda0680 00CF1B (v01 UL20A UL20A207 00000207 INTL 20051117)
[ 0.000000] ACPI: FACS 7ddaf000 000040
[ 0.000000] ACPI: APIC 7dda0390 00005C (v01 110209 APIC1000 20091102 MSFT 00000097)
[ 0.000000] ACPI: MCFG 7dda0430 00003C (v01 110209 OEMMCFG 20091102 MSFT 00000097)
[ 0.000000] ACPI: SLIC 7dda0470 000176 (v01 _ASUS_ Notebook 20091102 MSFT 00000097)
[ 0.000000] ACPI: ECDT 7dda0620 000054 (v01 110209 OEMECDT 20091102 MSFT 00000097)
[ 0.000000] ACPI: DBGP 7dda03f0 000034 (v01 110209 DBGP1000 20091102 MSFT 00000097)
[ 0.000000] ACPI: BOOT 7dda05f0 000028 (v01 110209 BOOT1000 20091102 MSFT 00000097)
[ 0.000000] ACPI: OEMB 7ddaf040 000071 (v01 110209 OEMB1000 20091102 MSFT 00000097)
[ 0.000000] ACPI: HPET 7ddad5a0 000038 (v01 110209 OEMHPET 20091102 MSFT 00000097)
[ 0.000000] ACPI: GSCI 7ddaf0c0 002024 (v01 110209 GMCHSCI 20091102 MSFT 00000097)
[ 0.000000] ACPI: DMAR 7ddb10f0 000150 (v01 110209 DMAR1000 20091102 MSFT 00000097)
[ 0.000000] ACPI: ATKG 7ddb1440 008024 (v01 _ASUS_ OEMATKG 20091102 MSFT 00000097)
[ 0.000000] ACPI: SSDT 7ddb9f10 0004F0 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1125MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] BRK [0x01054000, 0x01054fff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x377fdfff]
[ 0.000000] HighMem [mem 0x377fe000-0x7dd9ffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0x7dd9ffff]
[ 0.000000] On node 0 totalpages: 515389
[ 0.000000] free_area_init_node: node 0, pgdat c0a0ae80, node_mem_map f5aaa020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 223230 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2252 pages used for memmap
[ 0.000000] HighMem zone: 288162 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e0fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e1000-0x000fffff]
[ 0.000000] e820: [mem 0x80000000-0xfed1ffff] available for PCI devices
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 13 pages/cpu @f77c3000 s30336 r0 d22912 u53248
[ 0.000000] pcpu-alloc: s30336 r0 d22912 u53248 alloc=13*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 513613
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/test-3.x root=/dev/sda6 ro drm.debug=0xe acpi_backlight=vendor no_console_suspend rd.md=0 rd.lvm=0 rd.dm=0 vconsole.keymap=us vconsole.font=latarcyrheb-sun16 rd.luks=0 LANG=en_US.UTF-8 2
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] allocated 4123896 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007dda0)
[ 0.000000] Memory: 2016636K/2061556K available (4021K kernel code, 322K rwdata, 1864K rodata, 388K init, 5980K bss, 44920K reserved, 1152648K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xffe6e000 - 0xfffff000 (1604 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc0a12000 - 0xc0a73000 ( 388 kB)
.data : 0xc07ed9ef - 0xc0a11900 (2191 kB)
.text : 0xc0400000 - 0xc07ed9ef (4022 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
[ 0.000000] CPU 0 irqstacks, hard=f5008000 soft=f500a000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.000000] ... MAX_LOCK_DEPTH: 48
[ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
[ 0.000000] ... CLASSHASH_SIZE: 4096
[ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
[ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
[ 0.000000] ... CHAINHASH_SIZE: 16384
[ 0.000000] memory used by lock dependency info: 3567 kB
[ 0.000000] per task-struct memory footprint: 1152 bytes
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration failed
[ 0.000000] tsc: PIT calibration matches HPET. 1 loops
[ 0.000000] tsc: Detected 1300.001 MHz processor
[ 0.008003] Calibrating delay loop (skipped), value calculated using timer frequency.. 2600.00 BogoMIPS (lpj=5200004)
[ 0.008264] pid_max: default: 32768 minimum: 301
[ 0.008542] Security Framework initialized
[ 0.008675] SELinux: Initializing.
[ 0.012100] SELinux: Starting in permissive mode
[ 0.012134] Mount-cache hash table entries: 512
[ 0.013832] Initializing cgroup subsys memory
[ 0.013995] Initializing cgroup subsys devices
[ 0.014150] Initializing cgroup subsys freezer
[ 0.014302] Initializing cgroup subsys blkio
[ 0.014432] Initializing cgroup subsys perf_event
[ 0.014647] CPU: Physical Processor ID: 0
[ 0.014775] CPU: Processor Core ID: 0
[ 0.014903] mce: CPU supports 6 MCE banks
[ 0.015040] CPU0: Thermal monitoring enabled (TM2)
[ 0.015187] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
tlb_flushall_shift: -1
[ 0.015739] Freeing SMP alternatives memory: 12K (c0a73000 - c0a76000)
[ 0.015872] ACPI: Core revision 20131115
[ 0.040550] ACPI: All ACPI Tables successfully acquired
[ 0.048229] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.048943] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.088795] smpboot: CPU0: Genuine Intel(R) CPU U7300 @ 1.30GHz (fam: 06, model: 17, stepping: 0a)
[ 0.092000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.092000] ... version: 2
[ 0.092000] ... bit width: 40
[ 0.092000] ... generic registers: 2
[ 0.092000] ... value mask: 000000ffffffffff
[ 0.092000] ... max period: 000000007fffffff
[ 0.092000] ... fixed-purpose events: 3
[ 0.092000] ... event mask: 0000000700000003
[ 0.120468] CPU 1 irqstacks, hard=f50c6000 soft=f50d0000
[ 0.120473] x86: Booting SMP configuration:
[ 0.012000] Initializing CPU#1
[ 0.132447] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.120603] .... node #0, CPUs: #1
[ 0.132878] x86: Booted up 1 node, 2 CPUs
[ 0.133126] smpboot: Total of 2 processors activated (5200.00 BogoMIPS)
[ 0.136795] devtmpfs: initialized
[ 0.140397] PM: Registering ACPI NVS region [mem 0x7ddaf000-0x7dddffff] (200704 bytes)
[ 0.140985] RTC time: 2:35:58, date: 01/28/14
[ 0.141506] NET: Registered protocol family 16
[ 0.142751] cpuidle: using governor ladder
[ 0.142882] cpuidle: using governor menu
[ 0.144463] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.144694] ACPI: bus type PCI registered
[ 0.145057] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.145271] PCI: not using MMCONFIG
[ 0.145658] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3
[ 0.145790] PCI: Using configuration type 1 for base access
[ 0.151529] bio: create slab <bio-0> at 0
[ 0.152221] ACPI: Added _OSI(Module Device)
[ 0.154402] ACPI: Added _OSI(Processor Device)
[ 0.154533] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.154664] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.170931] ACPI : EC: EC description table is found, configuring boot EC
[ 0.196350] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.207257] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.216443] ACPI BIOS Warning (bug): Incorrect checksum in table [ATKG] - 0x1F, should be 0x25 (20131115/tbprint-214)
[ 0.217539] ACPI: SSDT 7ddb9540 0001C4 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.221786] ACPI: Dynamic OEM Table Load:
[ 0.222008] ACPI: SSDT (null) 0001C4 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.222709] ACPI: SSDT 7ddb97a0 000765 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.226906] ACPI: Dynamic OEM Table Load:
[ 0.227129] ACPI: SSDT (null) 000765 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.228227] ACPI: SSDT 7ddb9470 0000CC (v01 PmRef Cpu1Ist 00003000 INTL 20051117)
[ 0.232460] ACPI: Dynamic OEM Table Load:
[ 0.232683] ACPI: SSDT (null) 0000CC (v01 PmRef Cpu1Ist 00003000 INTL 20051117)
[ 0.233283] ACPI: SSDT 7ddb9710 000085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117)
[ 0.237487] ACPI: Dynamic OEM Table Load:
[ 0.237710] ACPI: SSDT (null) 000085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117)
[ 0.239070] ACPI: Interpreter enabled
[ 0.239238] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[ 0.239549] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[ 0.239930] ACPI: (supports S0 S3 S4 S5)
[ 0.240008] ACPI: Using IOAPIC for interrupt routing
[ 0.240245] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.248201] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.248412] PCI: Using MMCONFIG for extended config space
[ 0.248584] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.250097] ACPI: No dock devices found.
[ 0.294951] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.295094] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig Segments MSI]
[ 0.295692] acpi PNP0A08:00: PCIe port services disabled; not requesting _OSC control
[ 0.297081] PCI host bridge to bus 0000:00
[ 0.297216] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.297350] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.297484] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.297619] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.297754] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[ 0.297890] pci_bus 0000:00: root bus resource [mem 0x7de00000-0xffffffff]
[ 0.298109] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
[ 0.298712] pci 0000:00:02.0: [8086:2a42] type 00 class 0x030000
[ 0.298752] pci 0000:00:02.0: reg 0x10: [mem 0xfe400000-0xfe7fffff 64bit]
[ 0.298776] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.298794] pci 0000:00:02.0: reg 0x20: [io 0xdc00-0xdc07]
[ 0.299335] pci 0000:00:02.1: [8086:2a43] type 00 class 0x038000
[ 0.299369] pci 0000:00:02.1: reg 0x10: [mem 0xfe800000-0xfe8fffff 64bit]
[ 0.299909] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[ 0.300014] pci 0000:00:1a.0: reg 0x20: [io 0xd880-0xd89f]
[ 0.300510] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.300790] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[ 0.300907] pci 0000:00:1a.1: reg 0x20: [io 0xd800-0xd81f]
[ 0.301343] pci 0000:00:1a.1: System wakeup disabled by ACPI
[ 0.301623] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
[ 0.301740] pci 0000:00:1a.2: reg 0x20: [io 0xd480-0xd49f]
[ 0.302174] pci 0000:00:1a.2: System wakeup disabled by ACPI
[ 0.302476] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[ 0.302529] pci 0000:00:1a.7: reg 0x10: [mem 0xfe9fbc00-0xfe9fbfff]
[ 0.302757] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.303280] pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 0.303573] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[ 0.303620] pci 0000:00:1b.0: reg 0x10: [mem 0xfe9f4000-0xfe9f7fff 64bit]
[ 0.303823] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.304098] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.304379] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[ 0.304588] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.305014] pci 0000:00:1c.5: [8086:294a] type 01 class 0x060400
[ 0.305225] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.305512] pci 0000:00:1c.5: System wakeup disabled by ACPI
[ 0.305796] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[ 0.305913] pci 0000:00:1d.0: reg 0x20: [io 0xd400-0xd41f]
[ 0.306353] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.306645] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[ 0.306763] pci 0000:00:1d.1: reg 0x20: [io 0xd080-0xd09f]
[ 0.307207] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.307486] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[ 0.307603] pci 0000:00:1d.2: reg 0x20: [io 0xd000-0xd01f]
[ 0.308032] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.308334] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[ 0.308387] pci 0000:00:1d.7: reg 0x10: [mem 0xfe9fb800-0xfe9fbbff]
[ 0.308614] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.309078] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.309356] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.309748] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.310022] pci 0000:00:1f.0: [8086:2917] type 00 class 0x060100
[ 0.310637] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601
[ 0.310694] pci 0000:00:1f.2: reg 0x10: [io 0xcc00-0xcc07]
[ 0.310718] pci 0000:00:1f.2: reg 0x14: [io 0xc880-0xc883]
[ 0.310743] pci 0000:00:1f.2: reg 0x18: [io 0xc800-0xc807]
[ 0.310767] pci 0000:00:1f.2: reg 0x1c: [io 0xc480-0xc483]
[ 0.310791] pci 0000:00:1f.2: reg 0x20: [io 0xc400-0xc41f]
[ 0.310815] pci 0000:00:1f.2: reg 0x24: [mem 0xfe9fb000-0xfe9fb7ff]
[ 0.310959] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.311714] pci 0000:01:00.0: [8086:0083] type 00 class 0x028000
[ 0.311886] pci 0000:01:00.0: reg 0x10: [mem 0xfeafe000-0xfeafffff 64bit]
[ 0.312681] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.312963] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.313108] pci 0000:00:1c.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.313371] pci 0000:02:00.0: [1969:1062] type 00 class 0x020000
[ 0.313424] pci 0000:02:00.0: reg 0x10: [mem 0xfebc0000-0xfebfffff 64bit]
[ 0.313453] pci 0000:02:00.0: reg 0x18: [io 0xec00-0xec7f]
[ 0.313686] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.313782] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.314032] pci 0000:00:1c.5: PCI bridge to [bus 02]
[ 0.314170] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
[ 0.314182] pci 0000:00:1c.5: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.314437] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
[ 0.314596] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.314603] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.314610] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.314616] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.314623] pci 0000:00:1e.0: bridge window [mem 0x7de00000-0xffffffff] (subtractive decode)
[ 0.314716] pci_bus 0000:00: on NUMA node 0
[ 0.319969] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12)
[ 0.320793] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 *10 12)
[ 0.321490] ACPI: PCI Interrupt Link [LNKC] (IRQs *6)
[ 0.321996] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 12)
[ 0.322738] ACPI: PCI Interrupt Link [LNKE] (IRQs 6) *0, disabled.
[ 0.323342] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 12)
[ 0.324131] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 12)
[ 0.324921] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 7 10 12)
[ 0.327734] ACPI: Enabled 5 GPEs in block 00 to 3F
[ 0.327975] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.328363] Found 1 acpi root devices
[ 0.328907] ACPI : EC: GPE = 0x1b, I/O: command/status = 0x66, data = 0x62
[ 0.329515] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.329515] vgaarb: loaded
[ 0.329515] vgaarb: bridge control possible 0000:00:02.0
[ 0.329515] SCSI subsystem initialized
[ 0.329515] libata version 3.00 loaded.
[ 0.329515] PCI: Using ACPI for IRQ routing
[ 0.329515] PCI: pci_cache_line_size set to 64 bytes
[ 0.329515] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[ 0.329515] e820: reserve RAM buffer [mem 0x7dda0000-0x7fffffff]
[ 0.332687] cfg80211: Calling CRDA to update world regulatory domain
[ 0.332902] NetLabel: Initializing
[ 0.332902] NetLabel: domain hash size = 128
[ 0.332902] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.332902] NetLabel: unlabeled traffic allowed by default
[ 0.332902] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.332902] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.332938] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.336112] Switched to clocksource hpet
[ 0.336789] pnp: PnP ACPI init
[ 0.336985] ACPI: bus type PNP registered
[ 0.337294] system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved
[ 0.337480] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.337580] pnp 00:01: [dma 4]
[ 0.337667] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.337799] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.337983] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.338224] pnp 00:04: Plug and Play ACPI device, IDs SYN0a06 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
[ 0.338333] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.338450] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.338980] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.339119] system 00:07: [io 0x0800-0x087f] could not be reserved
[ 0.339255] system 00:07: [io 0x0400-0x041f] has been reserved
[ 0.339390] system 00:07: [io 0x0500-0x057f] has been reserved
[ 0.339526] system 00:07: [mem 0xfe9fac00-0xfe9facff window] has been reserved
[ 0.339736] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.339874] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.340010] system 00:07: [mem 0xfed45000-0xfed89fff] has been reserved
[ 0.340172] system 00:07: [mem 0xfed90000-0xfed90fff] has been reserved
[ 0.340309] system 00:07: [mem 0xfed91000-0xfed91fff] has been reserved
[ 0.341082] system 00:07: [mem 0xfed92000-0xfed92fff] has been reserved
[ 0.341219] system 00:07: [mem 0xfed93000-0xfed93fff] has been reserved
[ 0.341355] system 00:07: [mem 0xffb00000-0xffbfffff] has been reserved
[ 0.341492] system 00:07: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.341634] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.341912] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.342212] system 00:09: [mem 0xffa00000-0xffbfffff] could not be reserved
[ 0.342352] system 00:09: [mem 0xffe00000-0xffffffff] could not be reserved
[ 0.342495] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.342747] system 00:0a: [mem 0xffc00000-0xffdfffff] has been reserved
[ 0.342890] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.343165] system 00:0b: [io 0x0250-0x0253] has been reserved
[ 0.343301] system 00:0b: [io 0x0256-0x025f] has been reserved
[ 0.343438] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.343575] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.343713] system 00:0b: [mem 0xfec10000-0xfec17fff] has been reserved
[ 0.343849] system 00:0b: [mem 0xfec38000-0xfec3ffff] has been reserved
[ 0.343991] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.344303] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.344446] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.345622] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.345762] system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.345900] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.346038] system 00:0d: [mem 0x00100000-0x7ddfffff] could not be reserved
[ 0.346180] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.346675] pnp: PnP ACPI: found 14 devices
[ 0.346806] ACPI: bus type PNP unregistered
[ 0.391034] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 0.391063] pci 0000:00:1c.5: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.391074] pci 0000:00:1c.5: BAR 9: assigned [mem 0x7de00000-0x7dffffff 64bit pref]
[ 0.391284] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.391425] pci 0000:00:1c.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.391575] pci 0000:00:1c.5: PCI bridge to [bus 02]
[ 0.391710] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
[ 0.391852] pci 0000:00:1c.5: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.391992] pci 0000:00:1c.5: bridge window [mem 0x7de00000-0x7dffffff 64bit pref]
[ 0.392230] pci 0000:00:1e.0: PCI bridge to [bus 03]
[ 0.392386] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.392392] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.392398] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.392404] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.392410] pci_bus 0000:00: resource 8 [mem 0x7de00000-0xffffffff]
[ 0.392416] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.392422] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.392428] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.392434] pci_bus 0000:02: resource 2 [mem 0x7de00000-0x7dffffff 64bit pref]
[ 0.392440] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 0.392446] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 0.392452] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.392458] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.392463] pci_bus 0000:03: resource 8 [mem 0x7de00000-0xffffffff]
[ 0.392560] NET: Registered protocol family 2
[ 0.393436] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.393652] TCP bind hash table entries: 8192 (order: 6, 294912 bytes)
[ 0.394993] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.395200] TCP: reno registered
[ 0.395334] UDP hash table entries: 512 (order: 3, 40960 bytes)
[ 0.395625] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes)
[ 0.396315] NET: Registered protocol family 1
[ 0.396477] pci 0000:00:02.0: Boot video device
[ 0.396787] pci 0000:00:1a.0: uhci_check_and_reset_hc: legsup = 0x0f30
[ 0.396793] pci 0000:00:1a.0: Performing full reset
[ 0.397345] pci 0000:00:1a.1: uhci_check_and_reset_hc: legsup = 0x0030
[ 0.397351] pci 0000:00:1a.1: Performing full reset
[ 0.397897] pci 0000:00:1a.2: uhci_check_and_reset_hc: legsup = 0x0030
[ 0.397903] pci 0000:00:1a.2: Performing full reset
[ 0.399015] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x0f30
[ 0.399020] pci 0000:00:1d.0: Performing full reset
[ 0.399557] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0030
[ 0.399563] pci 0000:00:1d.1: Performing full reset
[ 0.400123] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0030
[ 0.400128] pci 0000:00:1d.2: Performing full reset
[ 0.400986] PCI: CLS 32 bytes, default 64
[ 0.401400] Unpacking initramfs...
[ 1.027331] Freeing initrd memory: 11020K (f6a6a000 - f752d000)
[ 1.050159] DMA-API: preallocated 65536 debug entries
[ 1.050298] DMA-API: debugging enabled by kernel config
[ 1.050752] Simple Boot Flag at 0x51 set to 0x1
[ 1.052175] Scanning for low memory corruption every 60 seconds
[ 1.053336] audit: initializing netlink socket (disabled)
[ 1.053541] type=2000 audit(1390876559.052:1): initialized
[ 1.054540] bounce pool size: 64 pages
[ 1.061016] VFS: Disk quotas dquot_6.5.2
[ 1.061295] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.063152] fuse init (API version 7.22)
[ 1.063608] msgmni has been set to 1709
[ 1.064141] SELinux: Registering netfilter hooks
[ 1.066450] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.066686] io scheduler noop registered
[ 1.066814] io scheduler deadline registered
[ 1.067090] io scheduler cfq registered (default)
[ 1.067696] intel_idle: does not run on family 6 model 23
[ 1.068802] ACPI: AC Adapter [AC0] (on-line)
[ 1.069244] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0
[ 1.069532] ACPI: Sleep Button [SLPB]
[ 1.069860] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 1.078055] ACPI: Lid Switch [LID]
[ 1.078357] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 1.078572] ACPI: Power Button [PWRF]
[ 1.079659] Monitor-Mwait will be used to enter C-1 state
[ 1.079875] Monitor-Mwait will be used to enter C-3 state
[ 1.079905] tsc: Marking TSC unstable due to TSC halts in idle
[ 1.080204] ACPI: acpi_idle registered with cpuidle
[ 1.087488] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.087623] ACPI: Thermal Zone [THRM] (48 C)
[ 1.087982] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.091594] Non-volatile memory driver v1.3
[ 1.091772] Linux agpgart interface v0.103
[ 1.094552] agpgart-intel 0000:00:00.0: Intel GM45 Chipset
[ 1.094871] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 1.096997] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[ 1.097753] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 1.098007] [drm] Initialized drm 1.1.0 20060810
[ 1.102120] [drm:i915_dump_device_info], i915 device info: gen=4, pciid=0x2a42 flags=is_mobile,need_gfx_hws,is_g4x,has_fbc,has_pipe_cxsr,has_hotplug,supports_tv,
[ 1.102282] [drm:intel_detect_pch], No PCH found?
[ 1.102288] [drm] Memory usable by graphics device = 2048M
[ 1.102454] [drm:i915_gem_gtt_init], GMADR size = 256M
[ 1.102459] [drm:i915_gem_gtt_init], GTT stolen size = 32M
[ 1.103769] [drm:intel_opregion_setup], graphic opregion physical addr: 0x7ddaf0e4
[ 1.103786] [drm:intel_opregion_setup], Public ACPI methods supported
[ 1.103791] [drm:intel_opregion_setup], SWSCI supported
[ 1.124244] [drm:swsci_setup], SWSCI BIOS requested (00000241) SBCB callbacks that are not supported (000000c1)
[ 1.124251] [drm:swsci_setup], SWSCI GBDA callbacks 000004f3, SBCB callbacks 00000241
[ 1.124255] [drm:intel_opregion_setup], ASLE supported
[ 1.124534] i915 0000:00:02.0: irq 40 for MSI/MSI-X
[ 1.124609] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.124827] [drm] Driver supports precise vblank timestamp query.
[ 1.124975] [drm:init_vbt_defaults], Set default to SSC at 100000 kHz
[ 1.124982] [drm:intel_parse_bios], Using VBT from OpRegion: $VBT CANTIGA d
[ 1.124990] [drm:parse_general_features], BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 96000 display_clock_mode 0 fdi_rx_polarity_inverted 0
[ 1.124995] [drm:parse_general_definitions], crt_ddc_bus_pin: 2
[ 1.125002] [drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables:
[ 1.125010] [drm:drm_mode_debug_printmodeline], Modeline 0:"1366x768" 0 71900 1366 1414 1480 1486 768 774 782 806 0x8 0xa
[ 1.125016] [drm:parse_lfp_panel_data], VBT initial LVDS value 4200033c
[ 1.125022] [drm:parse_lfp_backlight], VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 50
[ 1.125028] [drm:parse_sdvo_panel_data], Found SDVO panel mode in BIOS VBT tables:
[ 1.125036] [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
[ 1.125040] [drm:parse_sdvo_device_mapping], No SDVO device info is found in VBT
[ 1.125046] [drm:parse_mipi], No MIPI BDB found
[ 1.125072] [drm:intel_dsm_pci_probe], no _DSM method for intel device
[ 1.125119] [drm:i915_gem_init_stolen], found 33554432 bytes of stolen memory at 7e000000
[ 1.125623] [drm:intel_modeset_init], 2 display pipes available.
[ 1.125708] [drm:intel_modeset_init], pipe A sprite A init failed: -19
[ 1.125728] [drm:intel_modeset_init], pipe B sprite B init failed: -19
[ 1.125742] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.154276] ACPI: Battery Slot [BAT0] (battery present)
[ 1.208142] [drm:intel_lvds_init], using preferred mode from EDID:
[ 1.208151] [drm:drm_mode_debug_printmodeline], Modeline 8:"1366x768" 60 71900 1366 1414 1480 1486 768 774 782 806 0x48 0xa
[ 1.208162] [drm:intel_lvds_init], detected single-link lvds configuration
[ 1.208553] [drm:intel_panel_setup_backlight], backlight initialized, enabled, brightness 1398348/1992060, sysfs interface registered
[ 1.208711] [drm:intel_dp_init_connector], Adding DP connector on port D
[ 1.208818] [drm:intel_dp_i2c_init], i2c_init DPDDC-D
[ 1.209604] [drm:i965_irq_handler] *ERROR* pipe B underrun
[ 1.211809] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x71450064
[ 1.211825] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
[ 1.214379] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x71450064
[ 1.214397] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
[ 1.214497] [drm:intel_tv_init], Integrated TV is not present.
[ 1.214507] [drm:i915_gem_setup_global_gtt], clearing unused GTT space: [0, 7ffff000]
[ 1.218995] [drm:init_status_page], render ring hws offset: 0x00001000
[ 1.219001] [drm:i915_gem_object_create_stolen], creating stolen object: size=20000
[ 1.219009] [drm:i915_pages_create_for_stolen], offset=0x0, size=131072
[ 1.219149] [drm:init_status_page], bsd ring hws offset: 0x00024000
[ 1.219154] [drm:i915_gem_object_create_stolen], creating stolen object: size=20000
[ 1.219162] [drm:i915_pages_create_for_stolen], offset=0x20000, size=131072
[ 1.219258] [drm:intel_modeset_readout_hw_state], [CRTC:3] hw state readout: disabled
[ 1.219279] [drm:intel_modeset_readout_hw_state], [CRTC:4] hw state readout: enabled
[ 1.219288] [drm:intel_modeset_readout_hw_state], [ENCODER:6:LVDS-6] hw state readout: enabled, pipe B
[ 1.219297] [drm:intel_modeset_readout_hw_state], [ENCODER:12:DAC-12] hw state readout: enabled, pipe B
[ 1.219304] [drm:intel_modeset_readout_hw_state], [ENCODER:13:TMDS-13] hw state readout: disabled, pipe A
[ 1.219311] [drm:intel_modeset_readout_hw_state], [CONNECTOR:5:LVDS-1] hw state readout: enabled
[ 1.219318] [drm:intel_modeset_readout_hw_state], [CONNECTOR:11:VGA-1] hw state readout: enabled
[ 1.219324] [drm:intel_modeset_readout_hw_state], [CONNECTOR:14:DP-1] hw state readout: disabled
[ 1.219333] [drm:intel_dump_pipe_config], [CRTC:3][setup_hw_state] config for pipe A
[ 1.219338] [drm:intel_dump_pipe_config], cpu_transcoder: A
[ 1.219343] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
[ 1.219349] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 1.219355] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 1.219360] [drm:intel_dump_pipe_config], requested mode:
[ 1.219366] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 1.219371] [drm:intel_dump_pipe_config], adjusted mode:
[ 1.219377] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 1.219383] [drm:intel_dump_crtc_timings], crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
[ 1.219388] [drm:intel_dump_pipe_config], port clock: 0
[ 1.219392] [drm:intel_dump_pipe_config], pipe src size: 0x0
[ 1.219398] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 1.219403] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 1.219407] [drm:intel_dump_pipe_config], ips: 0
[ 1.219412] [drm:intel_dump_pipe_config], double wide: 0
[ 1.219419] [drm:intel_dump_pipe_config], [CRTC:4][setup_hw_state] config for pipe B
[ 1.219423] [drm:intel_dump_pipe_config], cpu_transcoder: B
[ 1.219428] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0
[ 1.219434] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 1.219441] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 1.219445] [drm:intel_dump_pipe_config], requested mode:
[ 1.219452] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 640 0 0 0 400 0 0 0 0x0 0x0
[ 1.219456] [drm:intel_dump_pipe_config], adjusted mode:
[ 1.219462] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xa
[ 1.219469] [drm:intel_dump_crtc_timings], crtc timings: 72000 1366 1414 1480 1486 768 774 782 806, type: 0x0 flags: 0xa
[ 1.219474] [drm:intel_dump_pipe_config], port clock: 72000
[ 1.219479] [drm:intel_dump_pipe_config], pipe src size: 640x400
[ 1.219485] [drm:intel_dump_pipe_config], gmch pfit: control: 0xa0000000, ratios: 0x0855077f, lvds border: 0x00008000
[ 1.219490] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 1.219494] [drm:intel_dump_pipe_config], ips: 0
[ 1.219499] [drm:intel_dump_pipe_config], double wide: 0
[ 1.219506] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1]
[ 1.219513] [drm:intel_connector_check_state], [CONNECTOR:11:VGA-1]
[ 1.219520] [drm:check_encoder_state], [ENCODER:6:LVDS-6]
[ 1.219526] [drm:check_encoder_state], [ENCODER:12:DAC-12]
[ 1.219533] [drm:check_encoder_state], [ENCODER:13:TMDS-13]
[ 1.219538] [drm:check_crtc_state], [CRTC:3]
[ 1.219544] [drm:check_crtc_state], [CRTC:4]
[ 1.219578] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
[ 1.219584] [drm:intel_lvds_detect], [CONNECTOR:5:LVDS-1]
[ 1.219600] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
[ 1.219608] [drm:drm_mode_debug_printmodeline], Modeline 8:"1366x768" 60 71900 1366 1414 1480 1486 768 774 782 806 0x48 0xa
[ 1.219613] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
[ 1.219619] [drm:intel_crt_detect], [CONNECTOR:11:VGA-1] force=1
[ 1.224068] [drm:intel_crt_detect], CRT not detected via hotplug
[ 1.228062] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[ 1.228068] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 1.228073] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 1.228078] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[ 1.228441] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 1.228447] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[ 1.228451] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 1.228457] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
[ 1.228463] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1]
[ 1.228468] [drm:intel_dp_detect], [CONNECTOR:14:DP-1]
[ 1.228474] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1] disconnected
[ 1.228478] [drm:drm_setup_crtcs],
[ 1.228484] [drm:drm_enable_connectors], connector 5 enabled? yes
[ 1.228489] [drm:drm_enable_connectors], connector 11 enabled? no
[ 1.228494] [drm:drm_enable_connectors], connector 14 enabled? no
[ 1.228499] [drm:drm_target_preferred], looking for cmdline mode on connector 5
[ 1.228503] [drm:drm_target_preferred], looking for preferred mode on connector 5
[ 1.228508] [drm:drm_target_preferred], found mode 1366x768
[ 1.228513] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config
[ 1.228520] [drm:drm_setup_crtcs], desired mode 1366x768 set on crtc 3
[ 1.228529] [drm:intelfb_create], no BIOS fb, allocating a new one
[ 1.228534] [drm:i915_gem_object_create_stolen], creating stolen object: size=408000
[ 1.228542] [drm:i915_pages_create_for_stolen], offset=0x40000, size=4227072
[ 1.230474] [drm:intelfb_create], allocated 1366x768 fb: 0x00046000, bo f5337f00
[ 1.231170] fbcon: inteldrmfb (fb0) is primary device
[ 1.233188] [drm:intel_crtc_set_config], [CRTC:3] [FB:18] #connectors=1 (x y) (0 0)
[ 1.233193] [drm:intel_set_config_compute_mode_changes], inactive crtc, full mode set
[ 1.233196] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set
[ 1.233201] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 1.233207] [drm:drm_mode_debug_printmodeline], Modeline 17:"1366x768" 60 71900 1366 1414 1480 1486 768 774 782 806 0x48 0xa
[ 1.233210] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=1, fb_changed=0
[ 1.233214] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 1.233218] [drm:intel_modeset_stage_output_state], [CONNECTOR:11:VGA-1] to [CRTC:4]
[ 1.233221] [drm:intel_modeset_stage_output_state], crtc changed, full mode switch
[ 1.233224] [drm:intel_modeset_stage_output_state], crtc enabled, full mode switch
[ 1.233229] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[ 1.233234] [drm:connected_sink_compute_bpp], [CONNECTOR:5:LVDS-1] checking for sink bpp constrains
[ 1.233260] [drm:intel_lvds_compute_config], forcing display bpp (was 24) to LVDS (18)
[ 1.233264] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 18, dithering: 1
[ 1.233268] [drm:intel_dump_pipe_config], [CRTC:3][modeset] config for pipe A
[ 1.233270] [drm:intel_dump_pipe_config], cpu_transcoder: A
[ 1.233273] [drm:intel_dump_pipe_config], pipe bpp: 18, dithering: 1
[ 1.233278] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 1.233282] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 1.233284] [drm:intel_dump_pipe_config], requested mode:
[ 1.233290] [drm:drm_mode_debug_printmodeline], Modeline 0:"1366x768" 60 71900 1366 1414 1480 1486 768 774 782 806 0x48 0xa
[ 1.233292] [drm:intel_dump_pipe_config], adjusted mode:
[ 1.233297] [drm:drm_mode_debug_printmodeline], Modeline 0:"1366x768" 60 71900 1366 1414 1480 1486 768 774 782 806 0x48 0xa
[ 1.233303] [drm:intel_dump_crtc_timings], crtc timings: 71900 1366 1414 1480 1486 768 774 782 806, type: 0x48 flags: 0xa
[ 1.233305] [drm:intel_dump_pipe_config], port clock: 71900
[ 1.233308] [drm:intel_dump_pipe_config], pipe src size: 1366x768
[ 1.233312] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 1.233315] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 1.233318] [drm:intel_dump_pipe_config], ips: 0
[ 1.233320] [drm:intel_dump_pipe_config], double wide: 0
[ 1.233477] [drm:i9xx_set_pipeconf], disabling CxSR downclocking
[ 1.233527] [drm:i9xx_update_plane], Writing base 00046000 00000000 0 0 5504
[ 1.233536] [drm:intel_update_fbc], no output, disabling
[ 1.233544] [drm:intel_crtc_mode_set], [ENCODER:6:LVDS-6] set [MODE:0:1366x768]
[ 1.234433] [drm:g4x_check_srwm], SR watermark: display plane 56, cursor 6
[ 1.234438] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=25, cursor=6, B: plane=2, cursor=2, SR: plane=56, cursor=6
[ 1.288130] [drm:intel_update_fbc], disabled per chip default
[ 1.288141] [drm:intel_panel_enable_backlight], pipe A
[ 1.288170] ------------[ cut here ]------------
[ 1.288179] WARNING: CPU: 1 PID: 1 at drivers/gpu/drm/i915/intel_panel.c:714 i965_enable_backlight+0x4a/0x119()
[ 1.288180] backlight already enabled
[ 1.288183] Modules linked in:
[ 1.288188] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.13.0-rc8AS+ #1
[ 1.288190] Hardware name: ASUSTeK Computer Inc. UL20A /UL20A , BIOS 207 11/02/2009
[ 1.288199] 00000000 00000000 f507ba34 c07e66d6 f507ba5c f507ba4c c042c880 c068068b
[ 1.288206] f6e10000 f6e84400 00000000 f507ba64 c042c8bd 00000009 f507ba5c c096322a
[ 1.288214] f507ba78 f507ba88 c068068b c09631eb 000002ca c096322a e0000000 f6e11c44
[ 1.288216] Call Trace:
[ 1.288222] [<c07e66d6>] dump_stack+0x48/0x69
[ 1.288228] [<c042c880>] warn_slowpath_common+0x5c/0x73
[ 1.288233] [<c068068b>] ? i965_enable_backlight+0x4a/0x119
[ 1.288237] [<c042c8bd>] warn_slowpath_fmt+0x26/0x2a
[ 1.288242] [<c068068b>] i965_enable_backlight+0x4a/0x119
[ 1.288247] [<c06813de>] intel_panel_enable_backlight+0x98/0xb1
[ 1.288252] [<c0671218>] intel_enable_lvds+0xf0/0x10d
[ 1.288256] [<c0668db6>] i9xx_crtc_enable+0x305/0x31b
[ 1.288264] [<c06925e2>] ? gen4_write64+0x3f/0x3f
[ 1.288268] [<c066b65e>] __intel_set_mode+0xe9e/0xf60
[ 1.288273] [<c066cfba>] intel_set_mode+0x12/0x2a
[ 1.288277] [<c066d706>] intel_crtc_set_config+0x663/0x958
[ 1.288282] [<c063d3b5>] drm_mode_set_config_internal+0x39/0x90
[ 1.288287] [<c063275d>] drm_fb_helper_set_par+0x49/0x88
[ 1.288293] [<c05d543c>] fbcon_init+0x2c9/0x3a5
[ 1.288298] [<c061b629>] visual_init+0x9a/0xed
[ 1.288303] [<c061c8dc>] do_bind_con_driver+0x13a/0x22f
[ 1.288308] [<c061ce0f>] do_take_over_console+0x108/0x130
[ 1.288313] [<c05d3284>] do_fbcon_takeover+0x4c/0x90
[ 1.288317] [<c05d5a6a>] fbcon_event_notify+0x273/0x551
[ 1.288322] [<c04448e9>] ? __blocking_notifier_call_chain+0x1e/0x4a
[ 1.288328] [<c044472c>] notifier_call_chain+0x25/0x46
[ 1.288332] [<c04448fd>] __blocking_notifier_call_chain+0x32/0x4a
[ 1.288336] [<c0444921>] blocking_notifier_call_chain+0xc/0xe
[ 1.288341] [<c05cba0b>] fb_notifier_call_chain+0x11/0x16
[ 1.288346] [<c05ccc90>] register_framebuffer+0x1fe/0x251
[ 1.288351] [<c06325f3>] drm_fb_helper_initial_config+0x31d/0x3a9
[ 1.288357] [<c07eb979>] ? _raw_spin_unlock_irqrestore+0x33/0x49
[ 1.288363] [<c069741d>] intel_fbdev_initial_config+0x19/0x1b
[ 1.288368] [<c0648c99>] i915_driver_load+0x8d9/0xb0f
[ 1.288374] [<c0638fca>] drm_dev_register+0xb6/0x119
[ 1.288378] [<c063aa10>] drm_get_pci_dev+0xe7/0x182
[ 1.288382] [<c0646712>] i915_pci_probe+0x39/0x42
[ 1.288388] [<c05c36eb>] pci_device_probe+0x57/0x9f
[ 1.288393] [<c06a1082>] driver_probe_device+0x7f/0x16f
[ 1.288397] [<c06a11ec>] __driver_attach+0x4e/0x6a
[ 1.288401] [<c069fcfc>] bus_for_each_dev+0x39/0x65
[ 1.288406] [<c06a0cdb>] driver_attach+0x14/0x16
[ 1.288410] [<c06a119e>] ? __device_attach+0x2c/0x2c
[ 1.288414] [<c06a0a0a>] bus_add_driver+0xb6/0x183
[ 1.288418] [<c06a165d>] driver_register+0x6f/0xa4
[ 1.288422] [<c05c2b2d>] __pci_register_driver+0x45/0x48
[ 1.288428] [<c0a330d5>] ? drm_core_init+0xe8/0xe8
[ 1.288432] [<c063aafc>] drm_pci_init+0x51/0xc5
[ 1.288436] [<c0a330d5>] ? drm_core_init+0xe8/0xe8
[ 1.288440] [<c0a33137>] i915_init+0x62/0x64
[ 1.288444] [<c04003e7>] do_one_initcall+0x79/0x102
[ 1.288448] [<c043fe39>] ? parameq+0x1c/0x20
[ 1.288452] [<c043ffa3>] ? parse_args+0x166/0x204
[ 1.288458] [<c0a12aef>] kernel_init_freeable+0x16c/0x1f6
[ 1.288463] [<c07e1175>] kernel_init+0x8/0xda
[ 1.288467] [<c07ec8b7>] ret_from_kernel_thread+0x1b/0x28
[ 1.288472] [<c07e116d>] ? rest_init+0xa1/0xa1
[ 1.288528] ---[ end trace 041fb7806a9b9805 ]---
[ 1.288532] [drm:intel_panel_actually_set_backlight], set backlight PWM = 1398348
[ 1.288604] [drm:asle_work], No request on ASLC interrupt 0x00000000
[ 1.288619] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1]
[ 1.288625] [drm:intel_connector_check_state], [CONNECTOR:11:VGA-1]
[ 1.288631] [drm:check_encoder_state], [ENCODER:6:LVDS-6]
[ 1.288635] [drm:check_encoder_state], [ENCODER:12:DAC-12]
[ 1.288640] [drm:check_encoder_state], [ENCODER:13:TMDS-13]
[ 1.288644] [drm:check_crtc_state], [CRTC:3]
[ 1.288667] [drm:check_crtc_state], [CRTC:4]
[ 1.288691] [drm:intel_pipe_config_compare] *ERROR* mismatch in gmch_pfit.lvds_border_bits (expected 32768, found 0)
[ 1.288693] ------------[ cut here ]------------
[ 1.288699] WARNING: CPU: 1 PID: 1 at drivers/gpu/drm/i915/intel_display.c:9558 check_crtc_state+0x7b1/0x7f3()
[ 1.288700] pipe state doesn't match!
[ 1.288703] Modules linked in:
[ 1.288708] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G W 3.13.0-rc8AS+ #1
[ 1.288710] Hardware name: ASUSTeK Computer Inc. UL20A /UL20A , BIOS 207 11/02/2009
[ 1.288723] 00000000 00000000 f507b890 c07e66d6 f507b8b8 f507b8a8 c042c880 c0662aea
[ 1.288735] f5142000 f6df4800 00000000 f507b8c0 c042c8bd 00000009 f507b8b8 c095db4f
[ 1.288747] f507b8d4 f507bb28 c0662aea c095c87c 00002556 c095db4f f6df4b90 f6df4b04
[ 1.288749] Call Trace:
[ 1.288755] [<c07e66d6>] dump_stack+0x48/0x69
[ 1.288760] [<c042c880>] warn_slowpath_common+0x5c/0x73
[ 1.288765] [<c0662aea>] ? check_crtc_state+0x7b1/0x7f3
[ 1.288770] [<c042c8bd>] warn_slowpath_fmt+0x26/0x2a
[ 1.288775] [<c0662aea>] check_crtc_state+0x7b1/0x7f3
[ 1.288786] [<c066cd09>] intel_modeset_check_state+0x2fb/0x552
[ 1.288792] [<c066cfc9>] intel_set_mode+0x21/0x2a
[ 1.288797] [<c066d706>] intel_crtc_set_config+0x663/0x958
[ 1.288803] [<c063d3b5>] drm_mode_set_config_internal+0x39/0x90
[ 1.288808] [<c063275d>] drm_fb_helper_set_par+0x49/0x88
[ 1.288814] [<c05d543c>] fbcon_init+0x2c9/0x3a5
[ 1.288819] [<c061b629>] visual_init+0x9a/0xed
[ 1.288825] [<c061c8dc>] do_bind_con_driver+0x13a/0x22f
[ 1.288831] [<c061ce0f>] do_take_over_console+0x108/0x130
[ 1.288836] [<c05d3284>] do_fbcon_takeover+0x4c/0x90
[ 1.288842] [<c05d5a6a>] fbcon_event_notify+0x273/0x551
[ 1.288846] [<c04448e9>] ? __blocking_notifier_call_chain+0x1e/0x4a
[ 1.288853] [<c044472c>] notifier_call_chain+0x25/0x46
[ 1.288858] [<c04448fd>] __blocking_notifier_call_chain+0x32/0x4a
[ 1.288863] [<c0444921>] blocking_notifier_call_chain+0xc/0xe
[ 1.288869] [<c05cba0b>] fb_notifier_call_chain+0x11/0x16
[ 1.288874] [<c05ccc90>] register_framebuffer+0x1fe/0x251
[ 1.288880] [<c06325f3>] drm_fb_helper_initial_config+0x31d/0x3a9
[ 1.288886] [<c07eb979>] ? _raw_spin_unlock_irqrestore+0x33/0x49
[ 1.288893] [<c069741d>] intel_fbdev_initial_config+0x19/0x1b
[ 1.288898] [<c0648c99>] i915_driver_load+0x8d9/0xb0f
[ 1.288905] [<c0638fca>] drm_dev_register+0xb6/0x119
[ 1.288910] [<c063aa10>] drm_get_pci_dev+0xe7/0x182
[ 1.288915] [<c0646712>] i915_pci_probe+0x39/0x42
[ 1.288920] [<c05c36eb>] pci_device_probe+0x57/0x9f
[ 1.288926] [<c06a1082>] driver_probe_device+0x7f/0x16f
[ 1.288931] [<c06a11ec>] __driver_attach+0x4e/0x6a
[ 1.288936] [<c069fcfc>] bus_for_each_dev+0x39/0x65
[ 1.288941] [<c06a0cdb>] driver_attach+0x14/0x16
[ 1.288946] [<c06a119e>] ? __device_attach+0x2c/0x2c
[ 1.288951] [<c06a0a0a>] bus_add_driver+0xb6/0x183
[ 1.288957] [<c06a165d>] driver_register+0x6f/0xa4
[ 1.288961] [<c05c2b2d>] __pci_register_driver+0x45/0x48
[ 1.288967] [<c0a330d5>] ? drm_core_init+0xe8/0xe8
[ 1.288972] [<c063aafc>] drm_pci_init+0x51/0xc5
[ 1.288977] [<c0a330d5>] ? drm_core_init+0xe8/0xe8
[ 1.288982] [<c0a33137>] i915_init+0x62/0x64
[ 1.288986] [<c04003e7>] do_one_initcall+0x79/0x102
[ 1.288991] [<c043fe39>] ? parameq+0x1c/0x20
[ 1.288995] [<c043ffa3>] ? parse_args+0x166/0x204
[ 1.289002] [<c0a12aef>] kernel_init_freeable+0x16c/0x1f6
[ 1.289007] [<c07e1175>] kernel_init+0x8/0xda
[ 1.289012] [<c07ec8b7>] ret_from_kernel_thread+0x1b/0x28
[ 1.289017] [<c07e116d>] ? rest_init+0xa1/0xa1
[ 1.289020] ---[ end trace 041fb7806a9b9806 ]---
[ 1.289023] [drm:intel_dump_pipe_config], [CRTC:4][hw state] config for pipe B
[ 1.289026] [drm:intel_dump_pipe_config], cpu_transcoder: B
[ 1.289029] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0
[ 1.289034] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 1.289038] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 1.289040] [drm:intel_dump_pipe_config], requested mode:
[ 1.289045] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 640 0 0 0 400 0 0 0 0x0 0x0
[ 1.289047] [drm:intel_dump_pipe_config], adjusted mode:
[ 1.289052] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xa
[ 1.289057] [drm:intel_dump_crtc_timings], crtc timings: 72000 1366 1414 1480 1486 768 774 782 806, type: 0x0 flags: 0xa
[ 1.289060] [drm:intel_dump_pipe_config], port clock: 72000
[ 1.289062] [drm:intel_dump_pipe_config], pipe src size: 640x400
[ 1.289066] [drm:intel_dump_pipe_config], gmch pfit: control: 0xa0000000, ratios: 0x0855077f, lvds border: 0x00000000
[ 1.289070] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 1.289072] [drm:intel_dump_pipe_config], ips: 0
[ 1.289075] [drm:intel_dump_pipe_config], double wide: 0
[ 1.289078] [drm:intel_dump_pipe_config], [CRTC:4][sw state] config for pipe B
[ 1.289080] [drm:intel_dump_pipe_config], cpu_transcoder: B
[ 1.289083] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0
[ 1.289088] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 1.289092] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 1.289094] [drm:intel_dump_pipe_config], requested mode:
[ 1.289099] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 640 0 0 0 400 0 0 0 0x0 0x0
[ 1.289102] [drm:intel_dump_pipe_config], adjusted mode:
[ 1.289106] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xa
[ 1.289111] [drm:intel_dump_crtc_timings], crtc timings: 72000 1366 1414 1480 1486 768 774 782 806, type: 0x0 flags: 0xa
[ 1.289114] [drm:intel_dump_pipe_config], port clock: 72000
[ 1.289117] [drm:intel_dump_pipe_config], pipe src size: 640x400
[ 1.289121] [drm:intel_dump_pipe_config], gmch pfit: control: 0xa0000000, ratios: 0x0855077f, lvds border: 0x00008000
[ 1.289124] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 1.289127] [drm:intel_dump_pipe_config], ips: 0
[ 1.289129] [drm:intel_dump_pipe_config], double wide: 0
[ 1.289136] [drm:intel_crtc_set_config], [CRTC:4] [NOFB]
[ 1.289142] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0
[ 1.289146] [drm:intel_modeset_stage_output_state], [CONNECTOR:11:VGA-1] to [NOCRTC]
[ 1.289148] [drm:intel_modeset_stage_output_state], encoder changed, full mode switch
[ 1.289152] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 1.289155] [drm:intel_modeset_stage_output_state], crtc changed, full mode switch
[ 1.289158] [drm:intel_modeset_stage_output_state], crtc disabled, full mode switch
[ 1.289162] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 0, prepare: 0, disable: 2
[ 1.304134] [drm:i9xx_pfit_disable], disabling pfit, current: 0xa0000000
[ 1.304144] [drm:g4x_check_srwm], SR watermark: display plane 56, cursor 6
[ 1.304150] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=25, cursor=6, B: plane=2, cursor=2, SR: plane=56, cursor=6
[ 1.304169] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1]
[ 1.304176] [drm:check_encoder_state], [ENCODER:6:LVDS-6]
[ 1.304181] [drm:check_encoder_state], [ENCODER:12:DAC-12]
[ 1.304186] [drm:check_encoder_state], [ENCODER:13:TMDS-13]
[ 1.304190] [drm:check_crtc_state], [CRTC:3]
[ 1.304212] [drm:check_crtc_state], [CRTC:4]
[ 1.304259] [drm:intel_crtc_set_config], [CRTC:3] [FB:18] #connectors=1 (x y) (0 0)
[ 1.304265] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
[ 1.304269] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 1.316731] [drm:intel_crtc_set_config], [CRTC:3] [FB:18] #connectors=1 (x y) (0 0)
[ 1.316737] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
[ 1.316741] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 1.328885] Console: switching to colour frame buffer device 170x48
[ 1.328897] [drm:intel_crtc_set_config], [CRTC:3] [FB:18] #connectors=1 (x y) (0 0)
[ 1.328903] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
[ 1.328907] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 1.698053] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 1.701028] i915 0000:00:02.0: registered panic notifier
[ 1.704500] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 1.708527] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input3
[ 1.711678] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 1.718808] loop: module loaded
[ 1.722069] ACPI Warning: 0x00000828-0x0000082f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
[ 1.725373] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.728782] ACPI Warning: 0x00000530-0x0000053f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[ 1.732322] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.735906] ACPI Warning: 0x00000500-0x0000052f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[ 1.739601] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.743348] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 1.747465] ahci 0000:00:1f.2: version 3.0
[ 1.747930] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[ 1.748086] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 1.751896] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x1 impl SATA mode
[ 1.755762] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs
[ 1.761995] scsi0 : ahci
[ 1.766364] scsi1 : ahci
[ 1.770444] scsi2 : ahci
[ 1.774463] scsi3 : ahci
[ 1.778320] ata1: SATA max UDMA/133 abar m2048@0xfe9fb000 port 0xfe9fb100 irq 41
[ 1.782075] ata2: DUMMY
[ 1.785817] ata3: DUMMY
[ 1.789543] ata4: DUMMY
[ 1.793610] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.801580] i8042: Detected active multiplexing controller, rev 1.1
[ 1.807207] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.811562] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.815671] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.819597] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.823487] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.827638] mousedev: PS/2 mouse device common for all mice
[ 1.832997] rtc_cmos 00:02: RTC can wake from S4
[ 1.837537] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.841372] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.845281] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 1.849221] iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x0860)
[ 1.853784] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 1.857773] iTCO_vendor_support: vendor-support=0
[ 1.862156] asus_laptop: Asus Laptop Support version 0.42
[ 1.866521] asus_laptop: UL20A model detected
[ 1.872496] [drm:asle_set_backlight], bclp = 0x800000b3
[ 1.872516] [drm:asle_set_backlight], updating opregion backlight 179/255
[ 1.872533] [drm:intel_panel_actually_set_backlight], set backlight PWM = 1398348
[ 1.872599] [drm:asle_work], No request on ASLC interrupt 0x00000000
[ 1.872745] input: Asus Laptop extra buttons as /devices/platform/asus_laptop/input/input5
[ 1.880426] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 2.060981] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 2.066043] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 2.070826] TCP: cubic registered
[ 2.075088] Initializing XFRM netlink socket
[ 2.079339] NET: Registered protocol family 17
[ 2.083599] NET: Registered protocol family 15
[ 2.088630] Using IPI No-Shortcut mode
[ 2.093694] registered taskstats version 1
[ 2.098863] Magic number: 14:311:562
[ 2.102891] rtc_cmos 00:02: setting system clock to 2014-01-28 02:36:00 UTC (1390876560)
[ 2.108831] PM: Hibernation image not present or could not be loaded.
[ 2.116353] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.125239] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2.131454] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 2.131461] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.187321] ata1.00: ATA-8: ST9250315AS, 0002SDM1, max UDMA/133
[ 2.193089] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.202652] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2.208530] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 2.208537] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.214482] ata1.00: configured for UDMA/133
[ 2.219846] scsi 0:0:0:0: Direct-Access ATA ST9250315AS 0002 PQ: 0 ANSI: 5
[ 2.226490] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 2.226881] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.233366] sd 0:0:0:0: [sda] Write Protect is off
[ 2.236859] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.236986] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.319459] sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 >
[ 2.325779] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.329635] Freeing unused kernel memory: 388K (c0a12000 - c0a73000)
[ 2.333635] Write protecting the kernel text: 4024k
[ 2.337418] Write protecting the kernel read-only data: 1868k
[ 2.362951] systemd[1]: systemd 197 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 2.367570] systemd[1]: Running in initial RAM disk.
[ 2.384648] systemd[1]: Failed to insert module 'autofs4'
[ 2.388691] systemd[1]: No hostname configured.
[ 2.392675] systemd[1]: Set hostname to <localhost>.
[ 2.397108] random: systemd urandom read with 22 bits of entropy available
[ 2.401129] systemd[1]: Initializing machine ID from random generator.
[ 2.431777] systemd[1]: Starting Encrypted Volumes.
[ 2.440295] systemd[1]: Reached target Encrypted Volumes.
[ 2.444535] systemd[1]: Starting udev Kernel Socket.
[ 2.452905] systemd[1]: Listening on udev Kernel Socket.
[ 2.457040] systemd[1]: Starting udev Control Socket.
[ 2.465414] systemd[1]: Listening on udev Control Socket.
[ 2.469306] systemd[1]: Starting Journal Socket.
[ 2.477656] systemd[1]: Listening on Journal Socket.
[ 2.481501] systemd[1]: Starting dracut cmdline hook...
[ 2.492421] systemd[1]: Started Load Kernel Modules.
[ 2.496321] systemd[1]: Starting Journal Service...
[ 2.512819] systemd[1]: Started Journal Service.
[ 2.519572] systemd[1]: Starting Sockets.
[ 2.527539] systemd[1]: Reached target Sockets.
[ 2.531310] systemd[1]: Starting Swap.
[ 2.539067] systemd[1]: Reached target Swap.
[ 2.542718] systemd[1]: Starting Local File Systems.
[ 2.550397] systemd[1]: Reached target Local File Systems.
[ 2.759096] [drm:intel_crtc_set_config], [CRTC:3] [FB:18] #connectors=1 (x y) (0 0)
[ 2.759104] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
[ 2.759109] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 2.800336] systemd-udevd[125]: starting version 197
[ 2.965248] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000, board id: 3655, fw id: 600854
[ 3.008040] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input13
[ 3.245184] [drm:i915_gem_open],
[ 3.245477] [drm:intel_crtc_cursor_set], cursor off
[ 3.245494] [drm:intel_crtc_set_config], [CRTC:3] [FB:18] #connectors=1 (x y) (0 0)
[ 3.245503] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
[ 3.245509] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 3.245517] [drm:intel_crtc_cursor_set], cursor off
[ 3.245522] [drm:intel_crtc_set_config], [CRTC:4] [NOFB]
[ 3.245528] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0
[ 3.245534] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 3.245592] [drm:i915_gem_open],
[ 3.245631] [drm:intel_crtc_cursor_set], cursor off
[ 3.245638] [drm:intel_crtc_set_config], [CRTC:3] [FB:18] #connectors=1 (x y) (0 0)
[ 3.245645] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
[ 3.245651] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 3.245657] [drm:intel_crtc_cursor_set], cursor off
[ 3.245662] [drm:intel_crtc_set_config], [CRTC:4] [NOFB]
[ 3.245669] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0
[ 3.245674] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 3.245720] [drm:i915_gem_open],
[ 3.245998] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[3] ENCODERS[3]
[ 3.246032] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[3] ENCODERS[3]
[ 3.246055] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 3.246069] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
[ 3.246074] [drm:intel_lvds_detect], [CONNECTOR:5:LVDS-1]
[ 3.246093] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
[ 3.246101] [drm:drm_mode_debug_printmodeline], Modeline 8:"1366x768" 60 71900 1366 1414 1480 1486 768 774 782 806 0x48 0xa
[ 3.246111] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 3.263808] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
[ 3.263822] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
[ 3.263828] [drm:intel_crt_detect], [CONNECTOR:11:VGA-1] force=1
[ 3.276092] [drm:intel_crt_detect], CRT not detected via hotplug
[ 3.280236] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[ 3.280244] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 3.280249] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 3.280255] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[ 3.280601] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 3.280607] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[ 3.280611] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 3.280618] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
[ 3.280635] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
[ 3.280642] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
[ 3.280647] [drm:intel_crt_detect], [CONNECTOR:11:VGA-1] force=1
[ 3.288087] [drm:intel_crt_detect], CRT not detected via hotplug
[ 3.292237] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[ 3.292245] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 3.292250] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 3.292255] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[ 3.292601] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 3.292606] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[ 3.292610] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 3.292617] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
[ 3.292640] [drm:drm_mode_getconnector], [CONNECTOR:14:?]
[ 3.292648] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1]
[ 3.292653] [drm:intel_dp_detect], [CONNECTOR:14:DP-1]
[ 3.292660] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1] disconnected
[ 3.292668] [drm:drm_mode_getconnector], [CONNECTOR:14:?]
[ 3.292675] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1]
[ 3.292679] [drm:intel_dp_detect], [CONNECTOR:14:DP-1]
[ 3.292685] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1] disconnected
[ 3.292962] [drm:drm_mode_addfb], [FB:19]
[ 4.407336] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 4.802804] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 4.860572] random: nonblocking pool is initialized
[ 5.234547] systemd-journald[64]: Received SIGTERM
[ 6.947444] type=1404 audit(1390876565.340:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
[ 7.349728] SELinux: 2048 avtab hash slots, 96503 rules.
[ 7.413995] SELinux: 2048 avtab hash slots, 96503 rules.
[ 7.485066] SELinux: 8 users, 83 roles, 4702 types, 269 bools, 1 sens, 1024 cats
[ 7.485077] SELinux: 83 classes, 96503 rules
[ 7.508900] SELinux: Completing initialization.
[ 7.508905] SELinux: Setting up existing superblocks.
[ 7.509107] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[ 7.509282] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
[ 7.509471] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
[ 7.509570] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[ 7.509955] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 7.510138] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
[ 7.512494] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
[ 7.512650] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
[ 7.513185] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
[ 7.513339] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
[ 7.513482] SELinux: initialized (dev aio, type aio), not configured for labeling
[ 7.513586] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
[ 7.513803] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
[ 7.513959] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
[ 7.514124] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[ 7.518054] SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
[ 7.518103] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 7.518122] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 7.518402] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 7.518598] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 7.518663] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 7.518716] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 7.518899] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 7.518973] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 7.519006] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 7.519033] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 7.519106] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 7.519251] SELinux: initialized (dev sda6, type ext4), uses xattr
[ 7.585689] type=1403 audit(1390876565.980:3): policy loaded auid=4294967295 ses=4294967295
[ 7.747493] systemd[1]: Successfully loaded SELinux policy in 869.605ms.
[ 8.067131] systemd[1]: Relabelled /dev and /run in 51.330ms.
[ 11.406226] SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
[ 12.021476] systemd-journald[286]: Vacuuming done, freed 0 bytes
[ 12.785478] EXT4-fs (sda6): re-mounted. Opts: (null)
[ 13.249509] systemd-udevd[320]: starting version 208
[ 14.286922] ACPI: bus type USB registered
[ 14.290363] usbcore: registered new interface driver usbfs
[ 14.293648] usbcore: registered new interface driver hub
[ 14.297462] usbcore: registered new device driver usb
[ 14.320700] uhci_hcd: USB Universal Host Controller Interface driver
[ 14.325215] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 14.331251] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[ 14.336387] ehci_hcd: block sizes: qh 80 qtd 96 itd 160 sitd 96
[ 14.338114] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 14.341811] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 14.345467] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 14.349189] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000
[ 14.349195] uhci_hcd 0000:00:1a.0: Performing full reset
[ 14.349217] uhci_hcd 0000:00:1a.0: supports USB remote wakeup
[ 14.349368] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000d880
[ 14.354013] usb usb1: default language 0x0409
[ 14.354114] usb usb1: udev 1, busnum 1, minor = 0
[ 14.354121] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 14.361440] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 14.364871] usb usb1: Product: UHCI Host Controller
[ 14.368310] usb usb1: Manufacturer: Linux 3.13.0-rc8AS+ uhci_hcd
[ 14.371774] usb usb1: SerialNumber: 0000:00:1a.0
[ 14.377466] usb usb1: usb_probe_device
[ 14.377478] usb usb1: configuration #1 chosen from 1 choice
[ 14.378263] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 14.378733] ehci-pci: EHCI PCI platform driver
[ 14.381736] hub 1-0:1.0: usb_probe_interface
[ 14.381740] hub 1-0:1.0: usb_probe_interface - got id
[ 14.381761] hub 1-0:1.0: USB hub found
[ 14.385848] hub 1-0:1.0: 2 ports detected
[ 14.389317] hub 1-0:1.0: standalone hub
[ 14.389328] hub 1-0:1.0: no power switching (usb 1.0)
[ 14.389333] hub 1-0:1.0: individual port over-current protection
[ 14.389344] hub 1-0:1.0: power on to power good time: 2ms
[ 14.390045] hub 1-0:1.0: local power source is good
[ 14.398814] usb usb1: usb port1's DeviceRemovable is changed to 1 according to platform information.
[ 14.398826] hub 1-0:1.0: trying to enable port power on non-switchable hub
[ 14.413019] usb usb1: unregistering interface 1-0:1.0
[ 14.417686] usb usb1: usb_disable_device nuking non-ep0 URBs
[ 14.418217] usb usb1: bus auto-suspend, wakeup 0
[ 14.418225] usb usb1: suspend_rh
[ 14.418338] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 14.422833] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 2
[ 14.426575] ehci-pci 0000:00:1a.7: debug port 1
[ 14.430679] ehci-pci 0000:00:1a.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
[ 14.430694] ehci-pci 0000:00:1a.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr hw prefetch
[ 14.430914] ehci-pci 0000:00:1a.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 14.435472] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported
[ 14.435805] ehci-pci 0000:00:1a.7: supports USB remote wakeup
[ 14.437895] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfe9fbc00
[ 14.443163] ehci-pci 0000:00:1a.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
[ 14.452153] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 14.460791] usb usb2: default language 0x0409
[ 14.460896] usb usb2: udev 1, busnum 2, minor = 128
[ 14.460903] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 14.465983] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 14.469936] usb usb2: Product: EHCI Host Controller
[ 14.473233] usb usb2: Manufacturer: Linux 3.13.0-rc8AS+ ehci_hcd
[ 14.477147] usb usb2: SerialNumber: 0000:00:1a.7
[ 14.488264] usb usb2: usb_probe_device
[ 14.488277] usb usb2: configuration #1 chosen from 1 choice
[ 14.488709] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[ 14.488983] hub 2-0:1.0: usb_probe_interface
[ 14.488994] hub 2-0:1.0: usb_probe_interface - got id
[ 14.489029] hub 2-0:1.0: USB hub found
[ 14.494852] hub 2-0:1.0: 6 ports detected
[ 14.506315] hub 2-0:1.0: standalone hub
[ 14.506326] hub 2-0:1.0: no power switching (usb 1.0)
[ 14.506331] hub 2-0:1.0: individual port over-current protection
[ 14.506344] hub 2-0:1.0: power on to power good time: 20ms
[ 14.512808] hub 2-0:1.0: local power source is good
[ 14.527469] usb usb2: usb port1's DeviceRemovable is changed to 1 according to platform information.
[ 14.527481] usb usb2: usb port3's DeviceRemovable is changed to 1 according to platform information.
[ 14.527491] usb usb2: usb port6's DeviceRemovable is changed to 1 according to platform information.
[ 14.527497] hub 2-0:1.0: trying to enable port power on non-switchable hub
[ 14.534215] ehci-pci 0000:00:1a.7: HS companion for 0000:00:1a.0
[ 14.534233] usb usb1: usb auto-resume
[ 14.534243] usb usb1: wakeup_rh
[ 14.556271] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 14.556444] hub 1-0:1.0: usb_probe_interface
[ 14.556454] hub 1-0:1.0: usb_probe_interface - got id
[ 14.556478] hub 1-0:1.0: USB hub found
[ 14.559973] hub 1-0:1.0: 2 ports detected
[ 14.566616] hub 1-0:1.0: standalone hub
[ 14.566627] hub 1-0:1.0: no power switching (usb 1.0)
[ 14.566632] hub 1-0:1.0: individual port over-current protection
[ 14.566643] hub 1-0:1.0: power on to power good time: 2ms
[ 14.567048] hub 1-0:1.0: local power source is good
[ 14.572386] usb usb1: usb port1's DeviceRemovable is changed to 1 according to platform information.
[ 14.572398] hub 1-0:1.0: trying to enable port power on non-switchable hub
[ 14.573346] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 14.578113] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 3
[ 14.583436] Intel(R) Wireless WiFi driver for Linux, in-tree:d
[ 14.586657] Copyright(c) 2003-2013 Intel Corporation
[ 14.589826] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 14.594359] uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000
[ 14.594370] uhci_hcd 0000:00:1a.1: Performing full reset
[ 14.594400] uhci_hcd 0000:00:1a.1: supports USB remote wakeup
[ 14.594481] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000d800
[ 14.594773] iwlwifi 0000:01:00.0: irq 42 for MSI/MSI-X
[ 14.597928] usb usb3: default language 0x0409
[ 14.598030] usb usb3: udev 1, busnum 3, minor = 256
[ 14.598040] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 14.604862] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 14.607948] usb usb3: Product: UHCI Host Controller
[ 14.611589] usb usb3: Manufacturer: Linux 3.13.0-rc8AS+ uhci_hcd
[ 14.616304] usb usb3: SerialNumber: 0000:00:1a.1
[ 14.625857] usb usb3: usb_probe_device
[ 14.625871] usb usb3: configuration #1 chosen from 1 choice
[ 14.627438] usb usb3: adding 3-0:1.0 (config #1, interface 0)
[ 14.627605] hub 3-0:1.0: usb_probe_interface
[ 14.627615] hub 3-0:1.0: usb_probe_interface - got id
[ 14.627633] hub 3-0:1.0: USB hub found
[ 14.631780] ehci-pci 0000:00:1a.7: GetStatus port:3 status 001803 0 ACK POWER sig=j CSC CONNECT
[ 14.631827] hub 2-0:1.0: port 3: status 0501 change 0001
[ 14.635239] atl1c 0000:02:00.0: version 1.0.1.1-NAPI
[ 14.638502] hub 3-0:1.0: 2 ports detected
[ 14.641862] hub 3-0:1.0: standalone hub
[ 14.641872] hub 3-0:1.0: no power switching (usb 1.0)
[ 14.641878] hub 3-0:1.0: individual port over-current protection
[ 14.641888] hub 3-0:1.0: power on to power good time: 2ms
[ 14.641971] hub 3-0:1.0: local power source is good
[ 14.650221] usb usb3: usb port1's DeviceRemovable is changed to 1 according to platform information.
[ 14.650233] hub 3-0:1.0: trying to enable port power on non-switchable hub
[ 14.655615] uhci_hcd 0000:00:1a.1: FS/LS companion for 0000:00:1a.7
[ 14.658137] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 14.662805] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 4
[ 14.668806] ehci-pci 0000:00:1d.7: debug port 1
[ 14.671966] ehci-pci 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
[ 14.671978] ehci-pci 0000:00:1d.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr hw prefetch
[ 14.672486] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 14.672902] hub 1-0:1.0: hub_suspend
[ 14.673271] usb usb1: bus auto-suspend, wakeup 1
[ 14.673292] usb usb1: suspend_rh
[ 14.673479] ehci-pci 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 14.677377] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[ 14.677386] ehci-pci 0000:00:1d.7: supports USB remote wakeup
[ 14.677469] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfe9fb800
[ 14.680770] ehci-pci 0000:00:1d.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
[ 14.692115] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 14.695869] usb usb4: default language 0x0409
[ 14.695971] usb usb4: udev 1, busnum 4, minor = 384
[ 14.695982] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 14.699359] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 14.703342] iwlwifi 0000:01:00.0: loaded firmware version 39.31.5.1 build 35138 op_mode iwldvm
[ 14.711168] usb usb4: Product: EHCI Host Controller
[ 14.728025] usb usb4: Manufacturer: Linux 3.13.0-rc8AS+ ehci_hcd
[ 14.731338] usb usb4: SerialNumber: 0000:00:1d.7
[ 14.734612] hub 2-0:1.0: state 7 ports 6 chg 0008 evt 0000
[ 14.734942] hub 2-0:1.0: port 3, status 0501, change 0000, 480 Mb/s
[ 14.744141] usb usb4: usb_probe_device
[ 14.744151] usb usb4: configuration #1 chosen from 1 choice
[ 14.744231] usb usb4: adding 4-0:1.0 (config #1, interface 0)
[ 14.744386] hub 4-0:1.0: usb_probe_interface
[ 14.744393] hub 4-0:1.0: usb_probe_interface - got id
[ 14.744411] hub 4-0:1.0: USB hub found
[ 14.748403] uhci_hcd 0000:00:1a.1: port 1 portsc 0082,00
[ 14.752232] hub 4-0:1.0: 6 ports detected
[ 14.755339] hub 4-0:1.0: standalone hub
[ 14.755345] hub 4-0:1.0: no power switching (usb 1.0)
[ 14.755354] hub 4-0:1.0: individual port over-current protection
[ 14.755362] hub 4-0:1.0: power on to power good time: 20ms
[ 14.755686] hub 4-0:1.0: local power source is good
[ 14.772680] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUG enabled
[ 14.775812] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[ 14.775872] hub 4-0:1.0: trying to enable port power on non-switchable hub
[ 14.776799] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 14.776819] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 14.776834] uhci_hcd 0000:00:1a.2: detected 2 ports
[ 14.776843] uhci_hcd 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x0000
[ 14.776846] uhci_hcd 0000:00:1a.2: Performing full reset
[ 14.776865] uhci_hcd 0000:00:1a.2: supports USB remote wakeup
[ 14.776926] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000d480
[ 14.777131] usb usb5: default language 0x0409
[ 14.777193] usb usb5: udev 1, busnum 5, minor = 512
[ 14.777198] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 14.777202] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 14.777205] usb usb5: Product: UHCI Host Controller
[ 14.777208] usb usb5: Manufacturer: Linux 3.13.0-rc8AS+ uhci_hcd
[ 14.777212] usb usb5: SerialNumber: 0000:00:1a.2
[ 14.808063] ehci-pci 0000:00:1a.7: port 3 reset complete, port enabled
[ 14.808074] ehci-pci 0000:00:1a.7: GetStatus port:3 status 001005 0 ACK POWER sig=se0 PE CONNECT
[ 14.808436] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
[ 14.809019] usb usb5: usb_probe_device
[ 14.809024] usb usb5: configuration #1 chosen from 1 choice
[ 14.809163] usb usb5: adding 5-0:1.0 (config #1, interface 0)
[ 14.809268] hub 5-0:1.0: usb_probe_interface
[ 14.809272] hub 5-0:1.0: usb_probe_interface - got id
[ 14.809282] hub 5-0:1.0: USB hub found
[ 14.809317] hub 5-0:1.0: 2 ports detected
[ 14.809320] hub 5-0:1.0: standalone hub
[ 14.809323] hub 5-0:1.0: no power switching (usb 1.0)
[ 14.809326] hub 5-0:1.0: individual port over-current protection
[ 14.809331] hub 5-0:1.0: power on to power good time: 2ms
[ 14.809378] hub 5-0:1.0: local power source is good
[ 14.810940] usb usb5: usb port2's DeviceRemovable is changed to 1 according to platform information.
[ 14.810943] hub 5-0:1.0: trying to enable port power on non-switchable hub
[ 14.811191] uhci_hcd 0000:00:1a.2: FS/LS companion for 0000:00:1a.7
[ 14.811520] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 14.811562] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 14.811575] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 14.811584] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
[ 14.811587] uhci_hcd 0000:00:1d.0: Performing full reset
[ 14.811606] uhci_hcd 0000:00:1d.0: supports USB remote wakeup
[ 14.811622] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d400
[ 14.811815] usb usb6: default language 0x0409
[ 14.811876] usb usb6: udev 1, busnum 6, minor = 640
[ 14.811880] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 14.811884] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 14.811888] usb usb6: Product: UHCI Host Controller
[ 14.811891] usb usb6: Manufacturer: Linux 3.13.0-rc8AS+ uhci_hcd
[ 14.811894] usb usb6: SerialNumber: 0000:00:1d.0
[ 14.847702] usb usb6: usb_probe_device
[ 14.847715] usb usb6: configuration #1 chosen from 1 choice
[ 14.847786] usb usb6: adding 6-0:1.0 (config #1, interface 0)
[ 14.847892] iwlwifi 0000:01:00.0: Detected Intel(R) Centrino(R) Wireless-N 1000 BGN, REV=0x6C
[ 14.848003] hub 6-0:1.0: usb_probe_interface
[ 14.848007] hub 6-0:1.0: usb_probe_interface - got id
[ 14.848038] hub 6-0:1.0: USB hub found
[ 14.848072] hub 6-0:1.0: 2 ports detected
[ 14.848076] hub 6-0:1.0: standalone hub
[ 14.848079] hub 6-0:1.0: no power switching (usb 1.0)
[ 14.848082] hub 6-0:1.0: individual port over-current protection
[ 14.848086] hub 6-0:1.0: power on to power good time: 2ms
[ 14.848133] hub 6-0:1.0: local power source is good
[ 14.849701] hub 6-0:1.0: trying to enable port power on non-switchable hub
[ 14.851940] uhci_hcd 0000:00:1d.0: FS/LS companion for 0000:00:1d.7
[ 14.858312] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 14.860567] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[ 14.864335] usb 2-3: new high-speed USB device number 2 using ehci-pci
[ 14.877503] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 14.888585] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 14.892619] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
[ 14.892629] uhci_hcd 0000:00:1d.1: Performing full reset
[ 14.892660] uhci_hcd 0000:00:1d.1: supports USB remote wakeup
[ 14.892694] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d080
[ 14.898591] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 14.899695] usb usb7: default language 0x0409
[ 14.899794] usb usb7: udev 1, busnum 7, minor = 768
[ 14.899805] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 14.903268] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 14.907150] usb usb7: Product: UHCI Host Controller
[ 14.914763] usb usb7: Manufacturer: Linux 3.13.0-rc8AS+ uhci_hcd
[ 14.924463] usb usb7: SerialNumber: 0000:00:1d.1
[ 14.934958] usb usb7: usb_probe_device
[ 14.934968] usb usb7: configuration #1 chosen from 1 choice
[ 14.935055] usb usb7: adding 7-0:1.0 (config #1, interface 0)
[ 14.937991] hub 7-0:1.0: usb_probe_interface
[ 14.938002] hub 7-0:1.0: usb_probe_interface - got id
[ 14.938020] hub 7-0:1.0: USB hub found
[ 14.942719] hub 7-0:1.0: 2 ports detected
[ 14.946126] hub 7-0:1.0: standalone hub
[ 14.946136] hub 7-0:1.0: no power switching (usb 1.0)
[ 14.946141] hub 7-0:1.0: individual port over-current protection
[ 14.946152] hub 7-0:1.0: power on to power good time: 2ms
[ 14.946241] hub 7-0:1.0: local power source is good
[ 14.954557] hub 7-0:1.0: trying to enable port power on non-switchable hub
[ 14.959577] uhci_hcd 0000:00:1d.1: FS/LS companion for 0000:00:1d.7
[ 14.960091] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 14.963460] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 14.966921] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 14.970290] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
[ 14.970296] uhci_hcd 0000:00:1d.2: Performing full reset
[ 14.970323] uhci_hcd 0000:00:1d.2: supports USB remote wakeup
[ 14.970349] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d000
[ 14.973937] ehci-pci 0000:00:1a.7: port 3 reset complete, port enabled
[ 14.973948] ehci-pci 0000:00:1a.7: GetStatus port:3 status 001005 0 ACK POWER sig=se0 PE CONNECT
[ 14.974473] usb usb8: default language 0x0409
[ 14.974574] usb usb8: udev 1, busnum 8, minor = 896
[ 14.974585] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 14.977912] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 14.981270] usb usb8: Product: UHCI Host Controller
[ 14.984552] usb usb8: Manufacturer: Linux 3.13.0-rc8AS+ uhci_hcd
[ 14.987904] usb usb8: SerialNumber: 0000:00:1d.2
[ 14.992328] usb usb8: usb_probe_device
[ 14.992339] usb usb8: configuration #1 chosen from 1 choice
[ 14.992413] usb usb8: adding 8-0:1.0 (config #1, interface 0)
[ 14.992566] hub 8-0:1.0: usb_probe_interface
[ 14.992572] hub 8-0:1.0: usb_probe_interface - got id
[ 14.992592] hub 8-0:1.0: USB hub found
[ 14.995911] hub 8-0:1.0: 2 ports detected
[ 15.001661] hub 8-0:1.0: standalone hub
[ 15.001672] hub 8-0:1.0: no power switching (usb 1.0)
[ 15.001677] hub 8-0:1.0: individual port over-current protection
[ 15.001689] hub 8-0:1.0: power on to power good time: 2ms
[ 15.001780] hub 8-0:1.0: local power source is good
[ 15.004462] hub 8-0:1.0: trying to enable port power on non-switchable hub
[ 15.004885] uhci_hcd 0000:00:1d.2: FS/LS companion for 0000:00:1d.7
[ 15.094004] usb 2-3: skipped 1 descriptor after configuration
[ 15.094016] usb 2-3: skipped 6 descriptors after interface
[ 15.094023] usb 2-3: skipped 1 descriptor after endpoint
[ 15.094032] usb 2-3: skipped 8 descriptors after interface
[ 15.094731] usb 2-3: default language 0x0409
[ 15.100731] usb 2-3: udev 2, busnum 2, minor = 129
[ 15.100743] usb 2-3: New USB device found, idVendor=04f2, idProduct=b036
[ 15.104226] usb 2-3: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 15.107605] usb 2-3: Product: USB2.0 0.3M UVC WebCam
[ 15.110997] usb 2-3: Manufacturer: Chicony Electronics Co., Ltd.
[ 15.114380] usb 2-3: SerialNumber: SN0001
[ 15.118903] usb 2-3: usb_probe_device
[ 15.118911] usb 2-3: configuration #1 chosen from 1 choice
[ 15.119511] usb 2-3: adding 2-3:1.0 (config #1, interface 0)
[ 15.126874] usb 2-3: adding 2-3:1.1 (config #1, interface 1)
[ 15.127169] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 15.127207] hub 3-0:1.0: hub_suspend
[ 15.127237] usb usb3: bus auto-suspend, wakeup 1
[ 15.127248] usb usb3: suspend_rh
[ 15.127309] hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 15.127338] hub 4-0:1.0: hub_suspend
[ 15.127612] usb usb4: bus auto-suspend, wakeup 1
[ 15.127622] ehci-pci 0000:00:1d.7: suspend root hub
[ 15.127740] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 15.127769] hub 5-0:1.0: hub_suspend
[ 15.127933] usb usb5: bus auto-suspend, wakeup 1
[ 15.127943] usb usb5: suspend_rh
[ 15.127996] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 15.128025] hub 6-0:1.0: hub_suspend
[ 15.128077] usb usb6: bus auto-suspend, wakeup 1
[ 15.128088] usb usb6: suspend_rh
[ 15.129792] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 15.129829] hub 7-0:1.0: hub_suspend
[ 15.129874] usb usb7: bus auto-suspend, wakeup 1
[ 15.129884] usb usb7: suspend_rh
[ 15.132578] hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 15.132617] hub 8-0:1.0: hub_suspend
[ 15.132663] usb usb8: bus auto-suspend, wakeup 1
[ 15.132674] usb usb8: suspend_rh
[ 15.178141] microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa07
[ 15.318958] microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa07
[ 15.322732] microcode: CPU0 updated to revision 0xa0b, date = 2010-09-28
[ 15.335923] microcode: CPU1 sig=0x1067a, pf=0x80, revision=0xa07
[ 15.339465] microcode: CPU1 sig=0x1067a, pf=0x80, revision=0xa07
[ 15.343461] microcode: CPU1 updated to revision 0xa0b, date = 2010-09-28
[ 15.379799] microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
[ 15.515904] irq 16: nobody cared (try booting with the "irqpoll" option)
[ 15.519245] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G W 3.13.0-rc8AS+ #1
[ 15.519898] Hardware name: ASUSTeK Computer Inc. UL20A /UL20A , BIOS 207 11/02/2009
[ 15.519898] 00000000 00000000 f50c7f84 c07e66d6 f514b600 f50c7f98 c04675c7 f514b600
[ 15.519898] 00000000 00000010 f50c7fb4 c0467936 2e4e7069 fffeea2f f514b600 00000010
[ 15.519898] 00000000 f50c7fd4 c0466052 00000000 00000000 00000000 f514b600 f514b654
[ 15.519898] Call Trace:
[ 15.519898] [<c07e66d6>] dump_stack+0x48/0x69
[ 15.519898] [<c04675c7>] __report_bad_irq+0x14/0x9e
[ 15.519898] [<c0467936>] note_interrupt+0x137/0x1b5
[ 15.519898] [<c0466052>] handle_irq_event_percpu+0xc5/0x107
[ 15.519898] [<c04660c0>] handle_irq_event+0x2c/0x44
[ 15.519898] [<c046808e>] ? handle_edge_irq+0xa9/0xa9
[ 15.519898] [<c04680f8>] handle_fasteoi_irq+0x6a/0x97
[ 15.519898] <IRQ> [<c0402f02>] ? do_IRQ+0x35/0x80
[ 15.519898] [<c07ece38>] ? common_interrupt+0x38/0x3d
[ 15.519898] [<c045007b>] ? enqueue_entity+0xb9/0x479
[ 15.519898] [<c06fd511>] ? cpuidle_enter_state+0x42/0xa7
[ 15.519898] [<c06fd61f>] ? cpuidle_idle_call+0xa9/0xe6
[ 15.519898] [<c06fe4f0>] ? ladder_select_state+0x184/0x184
[ 15.519898] [<c0407f7c>] ? arch_cpu_idle+0x8/0x1c
[ 15.519898] [<c046595d>] ? cpu_startup_entry+0xd9/0x144
[ 15.519898] [<c041ef0e>] ? start_secondary+0x1d8/0x1dd
[ 15.519898] handlers:
[ 15.519898] [<f8106e56>] usb_hcd_irq [usbcore]
[ 15.519898] Disabling IRQ #16
[ 16.862939] Adding 8389624k swap on /dev/sda7. Priority:-1 extents:1 across:8389624k
[ 17.070709] SELinux: initialized (dev sda5, type vfat), uses genfs_contexts
[ 17.203174] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
[ 17.206911] SELinux: initialized (dev sda8, type ext4), uses xattr
[ 17.289693] systemd-journald[286]: Received request to flush runtime journal from PID 1
[ 25.247481] atl1c 0000:02:00.0: irq 43 for MSI/MSI-X
[ 25.297893] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[ 25.315104] iwlwifi 0000:01:00.0: Radio type=0x0-0x0-0x3
[ 25.346174] uhci_hcd 0000:00:1a.0: uhci_pci_suspend
[ 25.346611] uhci_hcd 0000:00:1a.0: hcd_pci_runtime_suspend: 0
[ 25.346986] uhci_hcd 0000:00:1a.1: uhci_pci_suspend
[ 25.347337] uhci_hcd 0000:00:1a.1: hcd_pci_runtime_suspend: 0
[ 25.347723] uhci_hcd 0000:00:1a.2: uhci_pci_suspend
[ 25.348190] uhci_hcd 0000:00:1a.2: hcd_pci_runtime_suspend: 0
[ 25.348665] uhci_hcd 0000:00:1d.0: uhci_pci_suspend
[ 25.349015] uhci_hcd 0000:00:1d.0: hcd_pci_runtime_suspend: 0
[ 25.350290] uhci_hcd 0000:00:1d.1: uhci_pci_suspend
[ 25.350645] uhci_hcd 0000:00:1d.1: hcd_pci_runtime_suspend: 0
[ 25.351610] uhci_hcd 0000:00:1d.2: uhci_pci_suspend
[ 25.351963] uhci_hcd 0000:00:1d.2: hcd_pci_runtime_suspend: 0
[ 25.353079] ehci-pci 0000:00:1d.7: hcd_pci_runtime_suspend: 0
[ 25.386489] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[ 25.396665] iwlwifi 0000:01:00.0: Radio type=0x0-0x0-0x3
[ 25.692592] [drm:intel_crtc_cursor_set], cursor off
[ 25.692607] [drm:intel_crtc_set_config], [CRTC:3] [FB:18] #connectors=1 (x y) (0 0)
[ 25.692617] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
[ 25.692624] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 25.692631] [drm:intel_crtc_cursor_set], cursor off
[ 25.692637] [drm:intel_crtc_set_config], [CRTC:4] [NOFB]
[ 25.692644] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0
[ 25.692650] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 27.222755] wlan0: authenticate with 00:13:46:48:f3:2a
[ 27.240810] wlan0: send auth to 00:13:46:48:f3:2a (try 1/3)
[ 27.261122] wlan0: authenticated
[ 27.266640] iwlwifi 0000:01:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[ 27.271118] iwlwifi 0000:01:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 27.275546] iwlwifi 0000:01:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 27.280986] wlan0: associate with 00:13:46:48:f3:2a (try 1/3)
[ 27.296925] wlan0: RX AssocResp from 00:13:46:48:f3:2a (capab=0x431 status=0 aid=6)
[ 27.315616] wlan0: associated
[ 57.744899] type=1006 audit(1390876616.137:4): pid=486 uid=0 old auid=4294967295 new auid=1000 old ses=4294967295 new ses=1 res=1
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.13.0-rc8AS+ (stern@xxxxxxxxxxxxxxxxxx) (gcc version 4.8.2 20131212 (Red Hat 4.8.2-7) (GCC) ) #2 SMP PREEMPT Mon Jan 27 21:28:51 EST 2014
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e1000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007dd9ffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007dda0000-0x000000007ddaefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007ddaf000-0x000000007dddffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007dde0000-0x000000007ddfffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed3ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: ASUSTeK Computer Inc. UL20A /UL20A , BIOS 207 11/02/2009
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x7dda0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07DE00000 mask FFFE00000 uncachable
[ 0.000000] 2 base 07E000000 mask FFE000000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2014MB, range: 2MB, type UC
[ 0.000000] reg 2, base: 2016MB, range: 32MB, type UC
[ 0.000000] total RAM covered: 2014M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 64M num_reg: 3 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2014MB, range: 2MB, type UC
[ 0.000000] reg 2, base: 2016MB, range: 32MB, type UC
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] initial memory mapped: [mem 0x00000000-0x013fffff]
[ 0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x36400000-0x367fffff]
[ 0.000000] [mem 0x36400000-0x367fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x30000000-0x363fffff]
[ 0.000000] [mem 0x30000000-0x363fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x2fffffff]
[ 0.000000] [mem 0x00100000-0x003fffff] page 4k
[ 0.000000] [mem 0x00400000-0x2fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x36800000-0x377fdfff]
[ 0.000000] [mem 0x36800000-0x373fffff] page 2M
[ 0.000000] [mem 0x37400000-0x377fdfff] page 4k
[ 0.000000] BRK [0x01053000, 0x01053fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x36a6a000-0x3752cfff]
[ 0.000000] ACPI: RSDP 000f9180 000024 (v02 110209)
[ 0.000000] ACPI: XSDT 7dda0100 00008C (v01 _ASUS_ Notebook 20091102 MSFT 00000097)
[ 0.000000] ACPI: FACP 7dda0290 0000F4 (v03 110209 FACP1000 20091102 MSFT 00000097)
[ 0.000000] ACPI: DSDT 7dda0680 00CF1B (v01 UL20A UL20A207 00000207 INTL 20051117)
[ 0.000000] ACPI: FACS 7ddaf000 000040
[ 0.000000] ACPI: APIC 7dda0390 00005C (v01 110209 APIC1000 20091102 MSFT 00000097)
[ 0.000000] ACPI: MCFG 7dda0430 00003C (v01 110209 OEMMCFG 20091102 MSFT 00000097)
[ 0.000000] ACPI: SLIC 7dda0470 000176 (v01 _ASUS_ Notebook 20091102 MSFT 00000097)
[ 0.000000] ACPI: ECDT 7dda0620 000054 (v01 110209 OEMECDT 20091102 MSFT 00000097)
[ 0.000000] ACPI: DBGP 7dda03f0 000034 (v01 110209 DBGP1000 20091102 MSFT 00000097)
[ 0.000000] ACPI: BOOT 7dda05f0 000028 (v01 110209 BOOT1000 20091102 MSFT 00000097)
[ 0.000000] ACPI: OEMB 7ddaf040 000071 (v01 110209 OEMB1000 20091102 MSFT 00000097)
[ 0.000000] ACPI: HPET 7ddad5a0 000038 (v01 110209 OEMHPET 20091102 MSFT 00000097)
[ 0.000000] ACPI: GSCI 7ddaf0c0 002024 (v01 110209 GMCHSCI 20091102 MSFT 00000097)
[ 0.000000] ACPI: DMAR 7ddb10f0 000150 (v01 110209 DMAR1000 20091102 MSFT 00000097)
[ 0.000000] ACPI: ATKG 7ddb1440 008024 (v01 _ASUS_ OEMATKG 20091102 MSFT 00000097)
[ 0.000000] ACPI: SSDT 7ddb9f10 0004F0 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1125MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] BRK [0x01054000, 0x01054fff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x377fdfff]
[ 0.000000] HighMem [mem 0x377fe000-0x7dd9ffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0x7dd9ffff]
[ 0.000000] On node 0 totalpages: 515389
[ 0.000000] free_area_init_node: node 0, pgdat c0a0ae80, node_mem_map f5aaa020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 223230 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2252 pages used for memmap
[ 0.000000] HighMem zone: 288162 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e0fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e1000-0x000fffff]
[ 0.000000] e820: [mem 0x80000000-0xfed1ffff] available for PCI devices
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 13 pages/cpu @f77c3000 s30336 r0 d22912 u53248
[ 0.000000] pcpu-alloc: s30336 r0 d22912 u53248 alloc=13*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 513613
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/test-3.x root=/dev/sda6 ro drm.debug=0xe acpi_backlight=vendor no_console_suspend rd.md=0 rd.lvm=0 rd.dm=0 vconsole.keymap=us vconsole.font=latarcyrheb-sun16 rd.luks=0 LANG=en_US.UTF-8 2
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] allocated 4123896 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007dda0)
[ 0.000000] Memory: 2016636K/2061556K available (4021K kernel code, 322K rwdata, 1864K rodata, 388K init, 5980K bss, 44920K reserved, 1152648K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xffe6e000 - 0xfffff000 (1604 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc0a12000 - 0xc0a73000 ( 388 kB)
.data : 0xc07ed9ef - 0xc0a11900 (2191 kB)
.text : 0xc0400000 - 0xc07ed9ef (4022 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
[ 0.000000] CPU 0 irqstacks, hard=f5008000 soft=f500a000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.000000] ... MAX_LOCK_DEPTH: 48
[ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
[ 0.000000] ... CLASSHASH_SIZE: 4096
[ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
[ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
[ 0.000000] ... CHAINHASH_SIZE: 16384
[ 0.000000] memory used by lock dependency info: 3567 kB
[ 0.000000] per task-struct memory footprint: 1152 bytes
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1299.932 MHz processor
[ 0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 2599.86 BogoMIPS (lpj=5199728)
[ 0.004264] pid_max: default: 32768 minimum: 301
[ 0.004541] Security Framework initialized
[ 0.004673] SELinux: Initializing.
[ 0.004890] SELinux: Starting in permissive mode
[ 0.004923] Mount-cache hash table entries: 512
[ 0.006621] Initializing cgroup subsys memory
[ 0.006783] Initializing cgroup subsys devices
[ 0.006940] Initializing cgroup subsys freezer
[ 0.007092] Initializing cgroup subsys blkio
[ 0.007222] Initializing cgroup subsys perf_event
[ 0.007437] CPU: Physical Processor ID: 0
[ 0.007566] CPU: Processor Core ID: 0
[ 0.008013] mce: CPU supports 6 MCE banks
[ 0.008151] CPU0: Thermal monitoring enabled (TM2)
[ 0.008298] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
tlb_flushall_shift: -1
[ 0.008850] Freeing SMP alternatives memory: 12K (c0a73000 - c0a76000)
[ 0.008983] ACPI: Core revision 20131115
[ 0.033691] ACPI: All ACPI Tables successfully acquired
[ 0.036582] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.037295] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.078734] smpboot: CPU0: Genuine Intel(R) CPU U7300 @ 1.30GHz (fam: 06, model: 17, stepping: 0a)
[ 0.080000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.080000] ... version: 2
[ 0.080000] ... bit width: 40
[ 0.080000] ... generic registers: 2
[ 0.080000] ... value mask: 000000ffffffffff
[ 0.080000] ... max period: 000000007fffffff
[ 0.080000] ... fixed-purpose events: 3
[ 0.080000] ... event mask: 0000000700000003
[ 0.108469] CPU 1 irqstacks, hard=f50c6000 soft=f50d0000
[ 0.108475] x86: Booting SMP configuration:
[ 0.008000] Initializing CPU#1
[ 0.120447] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.108605] .... node #0, CPUs: #1
[ 0.121514] x86: Booted up 1 node, 2 CPUs
[ 0.121762] smpboot: Total of 2 processors activated (5199.72 BogoMIPS)
[ 0.128602] devtmpfs: initialized
[ 0.129220] PM: Registering ACPI NVS region [mem 0x7ddaf000-0x7dddffff] (200704 bytes)
[ 0.129220] RTC time: 2:41:27, date: 01/28/14
[ 0.129521] NET: Registered protocol family 16
[ 0.130787] cpuidle: using governor ladder
[ 0.130918] cpuidle: using governor menu
[ 0.131419] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.131647] ACPI: bus type PCI registered
[ 0.132147] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.132360] PCI: not using MMCONFIG
[ 0.132747] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3
[ 0.132880] PCI: Using configuration type 1 for base access
[ 0.140406] bio: create slab <bio-0> at 0
[ 0.140587] ACPI: Added _OSI(Module Device)
[ 0.140587] ACPI: Added _OSI(Processor Device)
[ 0.142545] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.142675] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.159954] ACPI : EC: EC description table is found, configuring boot EC
[ 0.185807] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.196797] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.208437] ACPI BIOS Warning (bug): Incorrect checksum in table [ATKG] - 0x1F, should be 0x25 (20131115/tbprint-214)
[ 0.209530] ACPI: SSDT 7ddb9540 0001C4 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.213803] ACPI: Dynamic OEM Table Load:
[ 0.214026] ACPI: SSDT (null) 0001C4 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.214723] ACPI: SSDT 7ddb97a0 000765 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.218943] ACPI: Dynamic OEM Table Load:
[ 0.219164] ACPI: SSDT (null) 000765 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.220292] ACPI: SSDT 7ddb9470 0000CC (v01 PmRef Cpu1Ist 00003000 INTL 20051117)
[ 0.224548] ACPI: Dynamic OEM Table Load:
[ 0.224771] ACPI: SSDT (null) 0000CC (v01 PmRef Cpu1Ist 00003000 INTL 20051117)
[ 0.225368] ACPI: SSDT 7ddb9710 000085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117)
[ 0.229597] ACPI: Dynamic OEM Table Load:
[ 0.229820] ACPI: SSDT (null) 000085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117)
[ 0.231178] ACPI: Interpreter enabled
[ 0.231347] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[ 0.231656] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[ 0.232040] ACPI: (supports S0 S3 S4 S5)
[ 0.232170] ACPI: Using IOAPIC for interrupt routing
[ 0.232404] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.240379] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.240590] PCI: Using MMCONFIG for extended config space
[ 0.240761] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.242274] ACPI: No dock devices found.
[ 0.287408] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.287551] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig Segments MSI]
[ 0.288167] acpi PNP0A08:00: PCIe port services disabled; not requesting _OSC control
[ 0.289566] PCI host bridge to bus 0000:00
[ 0.289701] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.289835] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.289969] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.290103] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.290239] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[ 0.290374] pci_bus 0000:00: root bus resource [mem 0x7de00000-0xffffffff]
[ 0.290593] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
[ 0.291190] pci 0000:00:02.0: [8086:2a42] type 00 class 0x030000
[ 0.291230] pci 0000:00:02.0: reg 0x10: [mem 0xfe400000-0xfe7fffff 64bit]
[ 0.291255] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.291273] pci 0000:00:02.0: reg 0x20: [io 0xdc00-0xdc07]
[ 0.291816] pci 0000:00:02.1: [8086:2a43] type 00 class 0x038000
[ 0.291850] pci 0000:00:02.1: reg 0x10: [mem 0xfe800000-0xfe8fffff 64bit]
[ 0.292409] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[ 0.292526] pci 0000:00:1a.0: reg 0x20: [io 0xd880-0xd89f]
[ 0.293019] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.293299] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[ 0.293417] pci 0000:00:1a.1: reg 0x20: [io 0xd800-0xd81f]
[ 0.293853] pci 0000:00:1a.1: System wakeup disabled by ACPI
[ 0.294129] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
[ 0.294246] pci 0000:00:1a.2: reg 0x20: [io 0xd480-0xd49f]
[ 0.294681] pci 0000:00:1a.2: System wakeup disabled by ACPI
[ 0.294988] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[ 0.295042] pci 0000:00:1a.7: reg 0x10: [mem 0xfe9fbc00-0xfe9fbfff]
[ 0.295271] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.295793] pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 0.296102] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[ 0.296148] pci 0000:00:1b.0: reg 0x10: [mem 0xfe9f4000-0xfe9f7fff 64bit]
[ 0.296353] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.296636] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.296917] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[ 0.297127] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.297558] pci 0000:00:1c.5: [8086:294a] type 01 class 0x060400
[ 0.297770] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.298059] pci 0000:00:1c.5: System wakeup disabled by ACPI
[ 0.298344] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[ 0.298461] pci 0000:00:1d.0: reg 0x20: [io 0xd400-0xd41f]
[ 0.298901] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.299190] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[ 0.299307] pci 0000:00:1d.1: reg 0x20: [io 0xd080-0xd09f]
[ 0.299752] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.300045] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[ 0.300163] pci 0000:00:1d.2: reg 0x20: [io 0xd000-0xd01f]
[ 0.300600] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.300901] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[ 0.300955] pci 0000:00:1d.7: reg 0x10: [mem 0xfe9fb800-0xfe9fbbff]
[ 0.301184] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.301672] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.301951] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.302346] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.302622] pci 0000:00:1f.0: [8086:2917] type 00 class 0x060100
[ 0.303233] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601
[ 0.303291] pci 0000:00:1f.2: reg 0x10: [io 0xcc00-0xcc07]
[ 0.303315] pci 0000:00:1f.2: reg 0x14: [io 0xc880-0xc883]
[ 0.303339] pci 0000:00:1f.2: reg 0x18: [io 0xc800-0xc807]
[ 0.303363] pci 0000:00:1f.2: reg 0x1c: [io 0xc480-0xc483]
[ 0.303388] pci 0000:00:1f.2: reg 0x20: [io 0xc400-0xc41f]
[ 0.303412] pci 0000:00:1f.2: reg 0x24: [mem 0xfe9fb000-0xfe9fb7ff]
[ 0.303557] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.304320] pci 0000:01:00.0: [8086:0083] type 00 class 0x028000
[ 0.304491] pci 0000:01:00.0: reg 0x10: [mem 0xfeafe000-0xfeafffff 64bit]
[ 0.305282] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.305564] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.305709] pci 0000:00:1c.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.305961] pci 0000:02:00.0: [1969:1062] type 00 class 0x020000
[ 0.306015] pci 0000:02:00.0: reg 0x10: [mem 0xfebc0000-0xfebfffff 64bit]
[ 0.306044] pci 0000:02:00.0: reg 0x18: [io 0xec00-0xec7f]
[ 0.306277] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.306381] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.306633] pci 0000:00:1c.5: PCI bridge to [bus 02]
[ 0.306772] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
[ 0.306784] pci 0000:00:1c.5: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.307039] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
[ 0.307197] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.307204] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.307210] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.307217] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.307224] pci 0000:00:1e.0: bridge window [mem 0x7de00000-0xffffffff] (subtractive decode)
[ 0.307318] pci_bus 0000:00: on NUMA node 0
[ 0.312604] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12)
[ 0.313444] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 *10 12)
[ 0.314140] ACPI: PCI Interrupt Link [LNKC] (IRQs *6)
[ 0.314646] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 12)
[ 0.315385] ACPI: PCI Interrupt Link [LNKE] (IRQs 6) *0, disabled.
[ 0.315986] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 12)
[ 0.316742] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 12)
[ 0.317531] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 7 10 12)
[ 0.320406] ACPI: Enabled 5 GPEs in block 00 to 3F
[ 0.320647] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.321046] Found 1 acpi root devices
[ 0.321576] ACPI : EC: GPE = 0x1b, I/O: command/status = 0x66, data = 0x62
[ 0.322182] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.322182] vgaarb: loaded
[ 0.322182] vgaarb: bridge control possible 0000:00:02.0
[ 0.322182] SCSI subsystem initialized
[ 0.322182] libata version 3.00 loaded.
[ 0.322182] PCI: Using ACPI for IRQ routing
[ 0.322182] PCI: pci_cache_line_size set to 64 bytes
[ 0.324109] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[ 0.324126] e820: reserve RAM buffer [mem 0x7dda0000-0x7fffffff]
[ 0.325385] cfg80211: Calling CRDA to update world regulatory domain
[ 0.325599] NetLabel: Initializing
[ 0.325599] NetLabel: domain hash size = 128
[ 0.325599] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.325599] NetLabel: unlabeled traffic allowed by default
[ 0.325599] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.325599] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.325599] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.328112] Switched to clocksource hpet
[ 0.328726] pnp: PnP ACPI init
[ 0.328915] ACPI: bus type PNP registered
[ 0.329222] system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved
[ 0.329408] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.329505] pnp 00:01: [dma 4]
[ 0.329595] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.329728] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.329915] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.330146] pnp 00:04: Plug and Play ACPI device, IDs SYN0a06 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
[ 0.330255] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.330377] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.330959] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.331099] system 00:07: [io 0x0800-0x087f] could not be reserved
[ 0.331235] system 00:07: [io 0x0400-0x041f] has been reserved
[ 0.331371] system 00:07: [io 0x0500-0x057f] has been reserved
[ 0.331507] system 00:07: [mem 0xfe9fac00-0xfe9facff window] has been reserved
[ 0.331719] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.331860] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.331997] system 00:07: [mem 0xfed45000-0xfed89fff] has been reserved
[ 0.332155] system 00:07: [mem 0xfed90000-0xfed90fff] has been reserved
[ 0.332292] system 00:07: [mem 0xfed91000-0xfed91fff] has been reserved
[ 0.332429] system 00:07: [mem 0xfed92000-0xfed92fff] has been reserved
[ 0.332565] system 00:07: [mem 0xfed93000-0xfed93fff] has been reserved
[ 0.332720] system 00:07: [mem 0xffb00000-0xffbfffff] has been reserved
[ 0.332857] system 00:07: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.332999] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.333271] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.333570] system 00:09: [mem 0xffa00000-0xffbfffff] could not be reserved
[ 0.333710] system 00:09: [mem 0xffe00000-0xffffffff] could not be reserved
[ 0.333853] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.334105] system 00:0a: [mem 0xffc00000-0xffdfffff] has been reserved
[ 0.334247] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.334526] system 00:0b: [io 0x0250-0x0253] has been reserved
[ 0.334664] system 00:0b: [io 0x0256-0x025f] has been reserved
[ 0.334801] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.334938] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.335075] system 00:0b: [mem 0xfec10000-0xfec17fff] has been reserved
[ 0.335211] system 00:0b: [mem 0xfec38000-0xfec3ffff] has been reserved
[ 0.335352] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.335635] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.335778] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.336979] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.337119] system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.337258] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.337396] system 00:0d: [mem 0x00100000-0x7ddfffff] could not be reserved
[ 0.337538] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.338037] pnp: PnP ACPI: found 14 devices
[ 0.338166] ACPI: bus type PNP unregistered
[ 0.382350] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 0.382379] pci 0000:00:1c.5: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.382391] pci 0000:00:1c.5: BAR 9: assigned [mem 0x7de00000-0x7dffffff 64bit pref]
[ 0.382603] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.382743] pci 0000:00:1c.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.382894] pci 0000:00:1c.5: PCI bridge to [bus 02]
[ 0.383029] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
[ 0.383171] pci 0000:00:1c.5: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.383311] pci 0000:00:1c.5: bridge window [mem 0x7de00000-0x7dffffff 64bit pref]
[ 0.383530] pci 0000:00:1e.0: PCI bridge to [bus 03]
[ 0.383686] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.383692] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.383698] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.383704] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.383710] pci_bus 0000:00: resource 8 [mem 0x7de00000-0xffffffff]
[ 0.383716] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.383722] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.383728] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.383734] pci_bus 0000:02: resource 2 [mem 0x7de00000-0x7dffffff 64bit pref]
[ 0.383741] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 0.383747] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 0.383752] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.383758] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.383764] pci_bus 0000:03: resource 8 [mem 0x7de00000-0xffffffff]
[ 0.383860] NET: Registered protocol family 2
[ 0.384760] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.384979] TCP bind hash table entries: 8192 (order: 6, 294912 bytes)
[ 0.386320] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.386525] TCP: reno registered
[ 0.386659] UDP hash table entries: 512 (order: 3, 40960 bytes)
[ 0.386951] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes)
[ 0.387613] NET: Registered protocol family 1
[ 0.387778] pci 0000:00:02.0: Boot video device
[ 0.388110] pci 0000:00:1a.0: uhci_check_and_reset_hc: legsup = 0x0f30
[ 0.388115] pci 0000:00:1a.0: Performing full reset
[ 0.388668] pci 0000:00:1a.1: uhci_check_and_reset_hc: legsup = 0x0030
[ 0.388673] pci 0000:00:1a.1: Performing full reset
[ 0.389223] pci 0000:00:1a.2: uhci_check_and_reset_hc: legsup = 0x0030
[ 0.389228] pci 0000:00:1a.2: Performing full reset
[ 0.390348] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x0f30
[ 0.390353] pci 0000:00:1d.0: Performing full reset
[ 0.390892] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0030
[ 0.390898] pci 0000:00:1d.1: Performing full reset
[ 0.391433] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0030
[ 0.391438] pci 0000:00:1d.2: Performing full reset
[ 0.392318] PCI: CLS 32 bytes, default 64
[ 0.392731] Unpacking initramfs...
[ 1.018700] Freeing initrd memory: 11020K (f6a6a000 - f752d000)
[ 1.041536] DMA-API: preallocated 65536 debug entries
[ 1.041676] DMA-API: debugging enabled by kernel config
[ 1.042130] Simple Boot Flag at 0x51 set to 0x1
[ 1.043501] Scanning for low memory corruption every 60 seconds
[ 1.044668] audit: initializing netlink socket (disabled)
[ 1.044875] type=2000 audit(1390876887.044:1): initialized
[ 1.045926] bounce pool size: 64 pages
[ 1.052366] VFS: Disk quotas dquot_6.5.2
[ 1.052644] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.054494] fuse init (API version 7.22)
[ 1.054956] msgmni has been set to 1709
[ 1.055475] SELinux: Registering netfilter hooks
[ 1.057848] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.058084] io scheduler noop registered
[ 1.058213] io scheduler deadline registered
[ 1.058491] io scheduler cfq registered (default)
[ 1.059098] intel_idle: does not run on family 6 model 23
[ 1.060221] ACPI: AC Adapter [AC0] (on-line)
[ 1.060665] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0
[ 1.060950] ACPI: Sleep Button [SLPB]
[ 1.061275] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 1.067648] ACPI: Lid Switch [LID]
[ 1.068101] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 1.068318] ACPI: Power Button [PWRF]
[ 1.069589] Monitor-Mwait will be used to enter C-1 state
[ 1.069614] Monitor-Mwait will be used to enter C-3 state
[ 1.069743] tsc: Marking TSC unstable due to TSC halts in idle
[ 1.069935] ACPI: acpi_idle registered with cpuidle
[ 1.076791] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.076926] ACPI: Thermal Zone [THRM] (47 C)
[ 1.077276] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.080424] Non-volatile memory driver v1.3
[ 1.080622] Linux agpgart interface v0.103
[ 1.081253] agpgart-intel 0000:00:00.0: Intel GM45 Chipset
[ 1.083596] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 1.085824] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[ 1.086523] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 1.086784] [drm] Initialized drm 1.1.0 20060810
[ 1.090787] [drm:i915_dump_device_info], i915 device info: gen=4, pciid=0x2a42 flags=is_mobile,need_gfx_hws,is_g4x,has_fbc,has_pipe_cxsr,has_hotplug,supports_tv,
[ 1.090976] [drm:intel_detect_pch], No PCH found?
[ 1.090982] [drm] Memory usable by graphics device = 2048M
[ 1.091165] [drm:i915_gem_gtt_init], GMADR size = 256M
[ 1.091170] [drm:i915_gem_gtt_init], GTT stolen size = 32M
[ 1.092575] [drm:intel_opregion_setup], graphic opregion physical addr: 0x7ddaf0e4
[ 1.092593] [drm:intel_opregion_setup], Public ACPI methods supported
[ 1.092597] [drm:intel_opregion_setup], SWSCI supported
[ 1.116091] [drm:swsci_setup], SWSCI BIOS requested (00000241) SBCB callbacks that are not supported (000000c1)
[ 1.116098] [drm:swsci_setup], SWSCI GBDA callbacks 000004f3, SBCB callbacks 00000241
[ 1.116102] [drm:intel_opregion_setup], ASLE supported
[ 1.116391] i915 0000:00:02.0: irq 40 for MSI/MSI-X
[ 1.116420] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.116553] [drm] Driver supports precise vblank timestamp query.
[ 1.116767] [drm:init_vbt_defaults], Set default to SSC at 100000 kHz
[ 1.116774] [drm:intel_parse_bios], Using VBT from OpRegion: $VBT CANTIGA d
[ 1.116781] [drm:parse_general_features], BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 96000 display_clock_mode 0 fdi_rx_polarity_inverted 0
[ 1.116786] [drm:parse_general_definitions], crt_ddc_bus_pin: 2
[ 1.116794] [drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables:
[ 1.116802] [drm:drm_mode_debug_printmodeline], Modeline 0:"1366x768" 0 71900 1366 1414 1480 1486 768 774 782 806 0x8 0xa
[ 1.116808] [drm:parse_lfp_panel_data], VBT initial LVDS value 4200033c
[ 1.116814] [drm:parse_lfp_backlight], VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 50
[ 1.116821] [drm:parse_sdvo_panel_data], Found SDVO panel mode in BIOS VBT tables:
[ 1.116828] [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
[ 1.116833] [drm:parse_sdvo_device_mapping], No SDVO device info is found in VBT
[ 1.116839] [drm:parse_mipi], No MIPI BDB found
[ 1.116865] [drm:intel_dsm_pci_probe], no _DSM method for intel device
[ 1.116911] [drm:i915_gem_init_stolen], found 33554432 bytes of stolen memory at 7e000000
[ 1.117326] [drm:intel_modeset_init], 2 display pipes available.
[ 1.117408] [drm:intel_modeset_init], pipe A sprite A init failed: -19
[ 1.117423] [drm:intel_modeset_init], pipe B sprite B init failed: -19
[ 1.117437] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.143932] ACPI: Battery Slot [BAT0] (battery present)
[ 1.204142] [drm:intel_lvds_init], using preferred mode from EDID:
[ 1.204150] [drm:drm_mode_debug_printmodeline], Modeline 8:"1366x768" 60 71900 1366 1414 1480 1486 768 774 782 806 0x48 0xa
[ 1.204165] [drm:intel_lvds_init], detected single-link lvds configuration
[ 1.204556] [drm:intel_panel_setup_backlight], backlight initialized, enabled, brightness 1398348/1992060, sysfs interface registered
[ 1.204714] [drm:intel_dp_init_connector], Adding DP connector on port D
[ 1.204826] [drm:intel_dp_i2c_init], i2c_init DPDDC-D
[ 1.205615] [drm:i965_irq_handler] *ERROR* pipe B underrun
[ 1.207823] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x71450064
[ 1.207838] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
[ 1.210393] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x71450064
[ 1.210411] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
[ 1.210518] [drm:intel_tv_init], Integrated TV is not present.
[ 1.210528] [drm:i915_gem_setup_global_gtt], clearing unused GTT space: [0, 7ffff000]
[ 1.215014] [drm:init_status_page], render ring hws offset: 0x00001000
[ 1.215020] [drm:i915_gem_object_create_stolen], creating stolen object: size=20000
[ 1.215028] [drm:i915_pages_create_for_stolen], offset=0x0, size=131072
[ 1.215169] [drm:init_status_page], bsd ring hws offset: 0x00024000
[ 1.215175] [drm:i915_gem_object_create_stolen], creating stolen object: size=20000
[ 1.215182] [drm:i915_pages_create_for_stolen], offset=0x20000, size=131072
[ 1.215279] [drm:intel_modeset_readout_hw_state], [CRTC:3] hw state readout: disabled
[ 1.215299] [drm:intel_modeset_readout_hw_state], [CRTC:4] hw state readout: enabled
[ 1.215308] [drm:intel_modeset_readout_hw_state], [ENCODER:6:LVDS-6] hw state readout: enabled, pipe B
[ 1.215316] [drm:intel_modeset_readout_hw_state], [ENCODER:12:DAC-12] hw state readout: enabled, pipe B
[ 1.215324] [drm:intel_modeset_readout_hw_state], [ENCODER:13:TMDS-13] hw state readout: disabled, pipe A
[ 1.215331] [drm:intel_modeset_readout_hw_state], [CONNECTOR:5:LVDS-1] hw state readout: enabled
[ 1.215337] [drm:intel_modeset_readout_hw_state], [CONNECTOR:11:VGA-1] hw state readout: enabled
[ 1.215344] [drm:intel_modeset_readout_hw_state], [CONNECTOR:14:DP-1] hw state readout: disabled
[ 1.215352] [drm:intel_dump_pipe_config], [CRTC:3][setup_hw_state] config for pipe A
[ 1.215357] [drm:intel_dump_pipe_config], cpu_transcoder: A
[ 1.215362] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
[ 1.215369] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 1.215375] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 1.215379] [drm:intel_dump_pipe_config], requested mode:
[ 1.215386] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 1.215390] [drm:intel_dump_pipe_config], adjusted mode:
[ 1.215397] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 1.215403] [drm:intel_dump_crtc_timings], crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
[ 1.215407] [drm:intel_dump_pipe_config], port clock: 0
[ 1.215412] [drm:intel_dump_pipe_config], pipe src size: 0x0
[ 1.215417] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 1.215422] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 1.215427] [drm:intel_dump_pipe_config], ips: 0
[ 1.215431] [drm:intel_dump_pipe_config], double wide: 0
[ 1.215438] [drm:intel_dump_pipe_config], [CRTC:4][setup_hw_state] config for pipe B
[ 1.215443] [drm:intel_dump_pipe_config], cpu_transcoder: B
[ 1.215448] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0
[ 1.215454] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 1.215460] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 1.215464] [drm:intel_dump_pipe_config], requested mode:
[ 1.215471] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 640 0 0 0 400 0 0 0 0x0 0x0
[ 1.215475] [drm:intel_dump_pipe_config], adjusted mode:
[ 1.215482] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xa
[ 1.215489] [drm:intel_dump_crtc_timings], crtc timings: 72000 1366 1414 1480 1486 768 774 782 806, type: 0x0 flags: 0xa
[ 1.215493] [drm:intel_dump_pipe_config], port clock: 72000
[ 1.215498] [drm:intel_dump_pipe_config], pipe src size: 640x400
[ 1.215504] [drm:intel_dump_pipe_config], gmch pfit: control: 0xa0000000, ratios: 0x0855077f, lvds border: 0x00008000
[ 1.215509] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 1.215514] [drm:intel_dump_pipe_config], ips: 0
[ 1.215518] [drm:intel_dump_pipe_config], double wide: 0
[ 1.215525] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1]
[ 1.215532] [drm:intel_connector_check_state], [CONNECTOR:11:VGA-1]
[ 1.215539] [drm:check_encoder_state], [ENCODER:6:LVDS-6]
[ 1.215546] [drm:check_encoder_state], [ENCODER:12:DAC-12]
[ 1.215552] [drm:check_encoder_state], [ENCODER:13:TMDS-13]
[ 1.215558] [drm:check_crtc_state], [CRTC:3]
[ 1.215563] [drm:check_crtc_state], [CRTC:4]
[ 1.215597] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
[ 1.215602] [drm:intel_lvds_detect], [CONNECTOR:5:LVDS-1]
[ 1.215618] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
[ 1.215626] [drm:drm_mode_debug_printmodeline], Modeline 8:"1366x768" 60 71900 1366 1414 1480 1486 768 774 782 806 0x48 0xa
[ 1.215632] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
[ 1.215637] [drm:intel_crt_detect], [CONNECTOR:11:VGA-1] force=1
[ 1.220068] [drm:intel_crt_detect], CRT not detected via hotplug
[ 1.224063] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[ 1.224069] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 1.224074] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 1.224079] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[ 1.224441] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 1.224446] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[ 1.224451] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 1.224456] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
[ 1.224462] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1]
[ 1.224467] [drm:intel_dp_detect], [CONNECTOR:14:DP-1]
[ 1.224474] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1] disconnected
[ 1.224478] [drm:drm_setup_crtcs],
[ 1.224484] [drm:drm_enable_connectors], connector 5 enabled? yes
[ 1.224489] [drm:drm_enable_connectors], connector 11 enabled? no
[ 1.224494] [drm:drm_enable_connectors], connector 14 enabled? no
[ 1.224499] [drm:drm_target_preferred], looking for cmdline mode on connector 5
[ 1.224503] [drm:drm_target_preferred], looking for preferred mode on connector 5
[ 1.224508] [drm:drm_target_preferred], found mode 1366x768
[ 1.224513] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config
[ 1.224520] [drm:drm_setup_crtcs], desired mode 1366x768 set on crtc 3
[ 1.224529] [drm:intelfb_create], no BIOS fb, allocating a new one
[ 1.224534] [drm:i915_gem_object_create_stolen], creating stolen object: size=408000
[ 1.224542] [drm:i915_pages_create_for_stolen], offset=0x40000, size=4227072
[ 1.226473] [drm:intelfb_create], allocated 1366x768 fb: 0x00046000, bo f52ac800
[ 1.227177] fbcon: inteldrmfb (fb0) is primary device
[ 1.229195] [drm:intel_crtc_set_config], [CRTC:3] [FB:18] #connectors=1 (x y) (0 0)
[ 1.229200] [drm:intel_set_config_compute_mode_changes], inactive crtc, full mode set
[ 1.229203] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set
[ 1.229208] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 1.229214] [drm:drm_mode_debug_printmodeline], Modeline 17:"1366x768" 60 71900 1366 1414 1480 1486 768 774 782 806 0x48 0xa
[ 1.229217] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=1, fb_changed=0
[ 1.229222] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 1.229226] [drm:intel_modeset_stage_output_state], [CONNECTOR:11:VGA-1] to [CRTC:4]
[ 1.229228] [drm:intel_modeset_stage_output_state], crtc changed, full mode switch
[ 1.229231] [drm:intel_modeset_stage_output_state], crtc enabled, full mode switch
[ 1.229236] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[ 1.229240] [drm:connected_sink_compute_bpp], [CONNECTOR:5:LVDS-1] checking for sink bpp constrains
[ 1.229266] [drm:intel_lvds_compute_config], forcing display bpp (was 24) to LVDS (18)
[ 1.229271] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 18, dithering: 1
[ 1.229274] [drm:intel_dump_pipe_config], [CRTC:3][modeset] config for pipe A
[ 1.229276] [drm:intel_dump_pipe_config], cpu_transcoder: A
[ 1.229279] [drm:intel_dump_pipe_config], pipe bpp: 18, dithering: 1
[ 1.229284] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 1.229288] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 1.229290] [drm:intel_dump_pipe_config], requested mode:
[ 1.229296] [drm:drm_mode_debug_printmodeline], Modeline 0:"1366x768" 60 71900 1366 1414 1480 1486 768 774 782 806 0x48 0xa
[ 1.229298] [drm:intel_dump_pipe_config], adjusted mode:
[ 1.229304] [drm:drm_mode_debug_printmodeline], Modeline 0:"1366x768" 60 71900 1366 1414 1480 1486 768 774 782 806 0x48 0xa
[ 1.229309] [drm:intel_dump_crtc_timings], crtc timings: 71900 1366 1414 1480 1486 768 774 782 806, type: 0x48 flags: 0xa
[ 1.229311] [drm:intel_dump_pipe_config], port clock: 71900
[ 1.229314] [drm:intel_dump_pipe_config], pipe src size: 1366x768
[ 1.229318] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 1.229321] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 1.229324] [drm:intel_dump_pipe_config], ips: 0
[ 1.229326] [drm:intel_dump_pipe_config], double wide: 0
[ 1.229482] [drm:i9xx_set_pipeconf], disabling CxSR downclocking
[ 1.229533] [drm:i9xx_update_plane], Writing base 00046000 00000000 0 0 5504
[ 1.229542] [drm:intel_update_fbc], no output, disabling
[ 1.229550] [drm:intel_crtc_mode_set], [ENCODER:6:LVDS-6] set [MODE:0:1366x768]
[ 1.230439] [drm:g4x_check_srwm], SR watermark: display plane 56, cursor 6
[ 1.230444] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=25, cursor=6, B: plane=2, cursor=2, SR: plane=56, cursor=6
[ 1.284134] [drm:intel_update_fbc], disabled per chip default
[ 1.284145] [drm:intel_panel_enable_backlight], pipe A
[ 1.284175] ------------[ cut here ]------------
[ 1.284184] WARNING: CPU: 0 PID: 1 at drivers/gpu/drm/i915/intel_panel.c:714 i965_enable_backlight+0x4a/0x119()
[ 1.284185] backlight already enabled
[ 1.284187] Modules linked in:
[ 1.284192] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.13.0-rc8AS+ #2
[ 1.284194] Hardware name: ASUSTeK Computer Inc. UL20A /UL20A , BIOS 207 11/02/2009
[ 1.284203] 00000000 00000000 f507ba34 c07e66d6 f507ba5c f507ba4c c042c880 c068067f
[ 1.284211] f6e3c000 f6d95000 00000000 f507ba64 c042c8bd 00000009 f507ba5c c096322a
[ 1.284218] f507ba78 f507ba88 c068067f c09631eb 000002ca c096322a e0000000 f6e3dc44
[ 1.284220] Call Trace:
[ 1.284226] [<c07e66d6>] dump_stack+0x48/0x69
[ 1.284232] [<c042c880>] warn_slowpath_common+0x5c/0x73
[ 1.284237] [<c068067f>] ? i965_enable_backlight+0x4a/0x119
[ 1.284241] [<c042c8bd>] warn_slowpath_fmt+0x26/0x2a
[ 1.284246] [<c068067f>] i965_enable_backlight+0x4a/0x119
[ 1.284251] [<c06813d2>] intel_panel_enable_backlight+0x98/0xb1
[ 1.284256] [<c067120f>] intel_enable_lvds+0xf0/0x10d
[ 1.284260] [<c0668d7e>] i9xx_crtc_enable+0x305/0x31b
[ 1.284267] [<c06925d6>] ? gen4_write64+0x3f/0x3f
[ 1.284271] [<c066b626>] __intel_set_mode+0xe9e/0xf60
[ 1.284275] [<c066cf82>] intel_set_mode+0x12/0x2a
[ 1.284280] [<c066d6ce>] intel_crtc_set_config+0x663/0x958
[ 1.284286] [<c063d3b5>] drm_mode_set_config_internal+0x39/0x90
[ 1.284290] [<c063275d>] drm_fb_helper_set_par+0x49/0x88
[ 1.284296] [<c05d543c>] fbcon_init+0x2c9/0x3a5
[ 1.284302] [<c061b629>] visual_init+0x9a/0xed
[ 1.284306] [<c061c8dc>] do_bind_con_driver+0x13a/0x22f
[ 1.284311] [<c061ce0f>] do_take_over_console+0x108/0x130
[ 1.284316] [<c05d3284>] do_fbcon_takeover+0x4c/0x90
[ 1.284320] [<c05d5a6a>] fbcon_event_notify+0x273/0x551
[ 1.284325] [<c04448e9>] ? __blocking_notifier_call_chain+0x1e/0x4a
[ 1.284330] [<c044472c>] notifier_call_chain+0x25/0x46
[ 1.284335] [<c04448fd>] __blocking_notifier_call_chain+0x32/0x4a
[ 1.284339] [<c0444921>] blocking_notifier_call_chain+0xc/0xe
[ 1.284344] [<c05cba0b>] fb_notifier_call_chain+0x11/0x16
[ 1.284349] [<c05ccc90>] register_framebuffer+0x1fe/0x251
[ 1.284354] [<c06325f3>] drm_fb_helper_initial_config+0x31d/0x3a9
[ 1.284360] [<c07eb979>] ? _raw_spin_unlock_irqrestore+0x33/0x49
[ 1.284365] [<c0697411>] intel_fbdev_initial_config+0x19/0x1b
[ 1.284370] [<c0648c99>] i915_driver_load+0x8d9/0xb0f
[ 1.284376] [<c0638fca>] drm_dev_register+0xb6/0x119
[ 1.284381] [<c063aa10>] drm_get_pci_dev+0xe7/0x182
[ 1.284385] [<c0646712>] i915_pci_probe+0x39/0x42
[ 1.284389] [<c05c36eb>] pci_device_probe+0x57/0x9f
[ 1.284395] [<c06a1076>] driver_probe_device+0x7f/0x16f
[ 1.284399] [<c06a11e0>] __driver_attach+0x4e/0x6a
[ 1.284403] [<c069fcf0>] bus_for_each_dev+0x39/0x65
[ 1.284407] [<c06a0ccf>] driver_attach+0x14/0x16
[ 1.284412] [<c06a1192>] ? __device_attach+0x2c/0x2c
[ 1.284416] [<c06a09fe>] bus_add_driver+0xb6/0x183
[ 1.284420] [<c06a1651>] driver_register+0x6f/0xa4
[ 1.284424] [<c05c2b2d>] __pci_register_driver+0x45/0x48
[ 1.284429] [<c0a330d5>] ? drm_core_init+0xe8/0xe8
[ 1.284434] [<c063aafc>] drm_pci_init+0x51/0xc5
[ 1.284438] [<c0a330d5>] ? drm_core_init+0xe8/0xe8
[ 1.284442] [<c0a33137>] i915_init+0x62/0x64
[ 1.284446] [<c04003e7>] do_one_initcall+0x79/0x102
[ 1.284450] [<c043fe39>] ? parameq+0x1c/0x20
[ 1.284454] [<c043ffa3>] ? parse_args+0x166/0x204
[ 1.284460] [<c0a12aef>] kernel_init_freeable+0x16c/0x1f6
[ 1.284465] [<c07e1175>] kernel_init+0x8/0xda
[ 1.284469] [<c07ec8b7>] ret_from_kernel_thread+0x1b/0x28
[ 1.284474] [<c07e116d>] ? rest_init+0xa1/0xa1
[ 1.284531] ---[ end trace 98d010b98bd69470 ]---
[ 1.284535] [drm:intel_panel_actually_set_backlight], set backlight PWM = 1398348
[ 1.284606] [drm:asle_work], No request on ASLC interrupt 0x00000000
[ 1.284620] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1]
[ 1.284626] [drm:intel_connector_check_state], [CONNECTOR:11:VGA-1]
[ 1.284632] [drm:check_encoder_state], [ENCODER:6:LVDS-6]
[ 1.284636] [drm:check_encoder_state], [ENCODER:12:DAC-12]
[ 1.284641] [drm:check_encoder_state], [ENCODER:13:TMDS-13]
[ 1.284645] [drm:check_crtc_state], [CRTC:3]
[ 1.284668] [drm:check_crtc_state], [CRTC:4]
[ 1.284692] [drm:intel_pipe_config_compare] *ERROR* mismatch in gmch_pfit.lvds_border_bits (expected 32768, found 0)
[ 1.284693] ------------[ cut here ]------------
[ 1.284699] WARNING: CPU: 0 PID: 1 at drivers/gpu/drm/i915/intel_display.c:9555 check_crtc_state+0x7b1/0x7f3()
[ 1.284701] pipe state doesn't match!
[ 1.284704] Modules linked in:
[ 1.284708] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 3.13.0-rc8AS+ #2
[ 1.284710] Hardware name: ASUSTeK Computer Inc. UL20A /UL20A , BIOS 207 11/02/2009
[ 1.284723] 00000000 00000000 f507b890 c07e66d6 f507b8b8 f507b8a8 c042c880 c0662aea
[ 1.284735] f50d9000 f5144800 00000000 f507b8c0 c042c8bd 00000009 f507b8b8 c095db4f
[ 1.284747] f507b8d4 f507bb28 c0662aea c095c87c 00002553 c095db4f f5144b90 f5144b04
[ 1.284749] Call Trace:
[ 1.284754] [<c07e66d6>] dump_stack+0x48/0x69
[ 1.284760] [<c042c880>] warn_slowpath_common+0x5c/0x73
[ 1.284765] [<c0662aea>] ? check_crtc_state+0x7b1/0x7f3
[ 1.284770] [<c042c8bd>] warn_slowpath_fmt+0x26/0x2a
[ 1.284775] [<c0662aea>] check_crtc_state+0x7b1/0x7f3
[ 1.284786] [<c066ccd1>] intel_modeset_check_state+0x2fb/0x552
[ 1.284791] [<c066cf91>] intel_set_mode+0x21/0x2a
[ 1.284797] [<c066d6ce>] intel_crtc_set_config+0x663/0x958
[ 1.284802] [<c063d3b5>] drm_mode_set_config_internal+0x39/0x90
[ 1.284808] [<c063275d>] drm_fb_helper_set_par+0x49/0x88
[ 1.284813] [<c05d543c>] fbcon_init+0x2c9/0x3a5
[ 1.284819] [<c061b629>] visual_init+0x9a/0xed
[ 1.284825] [<c061c8dc>] do_bind_con_driver+0x13a/0x22f
[ 1.284830] [<c061ce0f>] do_take_over_console+0x108/0x130
[ 1.284836] [<c05d3284>] do_fbcon_takeover+0x4c/0x90
[ 1.284841] [<c05d5a6a>] fbcon_event_notify+0x273/0x551
[ 1.284846] [<c04448e9>] ? __blocking_notifier_call_chain+0x1e/0x4a
[ 1.284852] [<c044472c>] notifier_call_chain+0x25/0x46
[ 1.284857] [<c04448fd>] __blocking_notifier_call_chain+0x32/0x4a
[ 1.284862] [<c0444921>] blocking_notifier_call_chain+0xc/0xe
[ 1.284868] [<c05cba0b>] fb_notifier_call_chain+0x11/0x16
[ 1.284874] [<c05ccc90>] register_framebuffer+0x1fe/0x251
[ 1.284880] [<c06325f3>] drm_fb_helper_initial_config+0x31d/0x3a9
[ 1.284886] [<c07eb979>] ? _raw_spin_unlock_irqrestore+0x33/0x49
[ 1.284892] [<c0697411>] intel_fbdev_initial_config+0x19/0x1b
[ 1.284897] [<c0648c99>] i915_driver_load+0x8d9/0xb0f
[ 1.284904] [<c0638fca>] drm_dev_register+0xb6/0x119
[ 1.284909] [<c063aa10>] drm_get_pci_dev+0xe7/0x182
[ 1.284914] [<c0646712>] i915_pci_probe+0x39/0x42
[ 1.284919] [<c05c36eb>] pci_device_probe+0x57/0x9f
[ 1.284925] [<c06a1076>] driver_probe_device+0x7f/0x16f
[ 1.284930] [<c06a11e0>] __driver_attach+0x4e/0x6a
[ 1.284935] [<c069fcf0>] bus_for_each_dev+0x39/0x65
[ 1.284940] [<c06a0ccf>] driver_attach+0x14/0x16
[ 1.284945] [<c06a1192>] ? __device_attach+0x2c/0x2c
[ 1.284950] [<c06a09fe>] bus_add_driver+0xb6/0x183
[ 1.284955] [<c06a1651>] driver_register+0x6f/0xa4
[ 1.284960] [<c05c2b2d>] __pci_register_driver+0x45/0x48
[ 1.284965] [<c0a330d5>] ? drm_core_init+0xe8/0xe8
[ 1.284971] [<c063aafc>] drm_pci_init+0x51/0xc5
[ 1.284976] [<c0a330d5>] ? drm_core_init+0xe8/0xe8
[ 1.284981] [<c0a33137>] i915_init+0x62/0x64
[ 1.284985] [<c04003e7>] do_one_initcall+0x79/0x102
[ 1.284990] [<c043fe39>] ? parameq+0x1c/0x20
[ 1.284995] [<c043ffa3>] ? parse_args+0x166/0x204
[ 1.285001] [<c0a12aef>] kernel_init_freeable+0x16c/0x1f6
[ 1.285006] [<c07e1175>] kernel_init+0x8/0xda
[ 1.285011] [<c07ec8b7>] ret_from_kernel_thread+0x1b/0x28
[ 1.285016] [<c07e116d>] ? rest_init+0xa1/0xa1
[ 1.285019] ---[ end trace 98d010b98bd69471 ]---
[ 1.285022] [drm:intel_dump_pipe_config], [CRTC:4][hw state] config for pipe B
[ 1.285025] [drm:intel_dump_pipe_config], cpu_transcoder: B
[ 1.285028] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0
[ 1.285033] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 1.285037] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 1.285039] [drm:intel_dump_pipe_config], requested mode:
[ 1.285044] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 640 0 0 0 400 0 0 0 0x0 0x0
[ 1.285047] [drm:intel_dump_pipe_config], adjusted mode:
[ 1.285051] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xa
[ 1.285056] [drm:intel_dump_crtc_timings], crtc timings: 72000 1366 1414 1480 1486 768 774 782 806, type: 0x0 flags: 0xa
[ 1.285059] [drm:intel_dump_pipe_config], port clock: 72000
[ 1.285062] [drm:intel_dump_pipe_config], pipe src size: 640x400
[ 1.285066] [drm:intel_dump_pipe_config], gmch pfit: control: 0xa0000000, ratios: 0x0855077f, lvds border: 0x00000000
[ 1.285069] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 1.285072] [drm:intel_dump_pipe_config], ips: 0
[ 1.285075] [drm:intel_dump_pipe_config], double wide: 0
[ 1.285078] [drm:intel_dump_pipe_config], [CRTC:4][sw state] config for pipe B
[ 1.285080] [drm:intel_dump_pipe_config], cpu_transcoder: B
[ 1.285083] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0
[ 1.285088] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 1.285092] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 1.285094] [drm:intel_dump_pipe_config], requested mode:
[ 1.285099] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 640 0 0 0 400 0 0 0 0x0 0x0
[ 1.285101] [drm:intel_dump_pipe_config], adjusted mode:
[ 1.285106] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xa
[ 1.285111] [drm:intel_dump_crtc_timings], crtc timings: 72000 1366 1414 1480 1486 768 774 782 806, type: 0x0 flags: 0xa
[ 1.285113] [drm:intel_dump_pipe_config], port clock: 72000
[ 1.285116] [drm:intel_dump_pipe_config], pipe src size: 640x400
[ 1.285120] [drm:intel_dump_pipe_config], gmch pfit: control: 0xa0000000, ratios: 0x0855077f, lvds border: 0x00008000
[ 1.285123] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 1.285126] [drm:intel_dump_pipe_config], ips: 0
[ 1.285128] [drm:intel_dump_pipe_config], double wide: 0
[ 1.285135] [drm:intel_crtc_set_config], [CRTC:4] [NOFB]
[ 1.285141] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0
[ 1.285145] [drm:intel_modeset_stage_output_state], [CONNECTOR:11:VGA-1] to [NOCRTC]
[ 1.285147] [drm:intel_modeset_stage_output_state], encoder changed, full mode switch
[ 1.285151] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 1.285154] [drm:intel_modeset_stage_output_state], crtc changed, full mode switch
[ 1.285156] [drm:intel_modeset_stage_output_state], crtc disabled, full mode switch
[ 1.285161] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 0, prepare: 0, disable: 2
[ 1.300131] [drm:i9xx_pfit_disable], disabling pfit, current: 0xa0000000
[ 1.300141] [drm:g4x_check_srwm], SR watermark: display plane 56, cursor 6
[ 1.300147] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=25, cursor=6, B: plane=2, cursor=2, SR: plane=56, cursor=6
[ 1.300167] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1]
[ 1.300174] [drm:check_encoder_state], [ENCODER:6:LVDS-6]
[ 1.300178] [drm:check_encoder_state], [ENCODER:12:DAC-12]
[ 1.300183] [drm:check_encoder_state], [ENCODER:13:TMDS-13]
[ 1.300187] [drm:check_crtc_state], [CRTC:3]
[ 1.300209] [drm:check_crtc_state], [CRTC:4]
[ 1.300254] [drm:intel_crtc_set_config], [CRTC:3] [FB:18] #connectors=1 (x y) (0 0)
[ 1.300260] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
[ 1.300265] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 1.312725] [drm:intel_crtc_set_config], [CRTC:3] [FB:18] #connectors=1 (x y) (0 0)
[ 1.312731] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
[ 1.312735] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 1.324868] Console: switching to colour frame buffer device 170x48
[ 1.324879] [drm:intel_crtc_set_config], [CRTC:3] [FB:18] #connectors=1 (x y) (0 0)
[ 1.324885] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
[ 1.324889] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 1.693559] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 1.696480] i915 0000:00:02.0: registered panic notifier
[ 1.699935] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 1.703936] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input3
[ 1.707088] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 1.714284] loop: module loaded
[ 1.717566] ACPI Warning: 0x00000828-0x0000082f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
[ 1.720874] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.724298] ACPI Warning: 0x00000530-0x0000053f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[ 1.727819] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.731412] ACPI Warning: 0x00000500-0x0000052f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[ 1.735134] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.738920] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 1.743020] ahci 0000:00:1f.2: version 3.0
[ 1.743487] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[ 1.743619] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 1.747453] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x1 impl SATA mode
[ 1.751294] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs
[ 1.757533] scsi0 : ahci
[ 1.761909] scsi1 : ahci
[ 1.765981] scsi2 : ahci
[ 1.770044] scsi3 : ahci
[ 1.773901] ata1: SATA max UDMA/133 abar m2048@0xfe9fb000 port 0xfe9fb100 irq 41
[ 1.777679] ata2: DUMMY
[ 1.781421] ata3: DUMMY
[ 1.785107] ata4: DUMMY
[ 1.789166] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.797506] i8042: Detected active multiplexing controller, rev 1.1
[ 1.803432] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.807932] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.811922] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.815843] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.819721] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.823901] mousedev: PS/2 mouse device common for all mice
[ 1.829356] rtc_cmos 00:02: RTC can wake from S4
[ 1.833942] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.837807] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.841707] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 1.845648] iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x0860)
[ 1.850178] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 1.854187] iTCO_vendor_support: vendor-support=0
[ 1.858587] asus_laptop: Asus Laptop Support version 0.42
[ 1.862967] asus_laptop: UL20A model detected
[ 1.868892] [drm:asle_set_backlight], bclp = 0x800000b3
[ 1.868912] [drm:asle_set_backlight], updating opregion backlight 179/255
[ 1.868929] [drm:intel_panel_actually_set_backlight], set backlight PWM = 1398348
[ 1.868996] [drm:asle_work], No request on ASLC interrupt 0x00000000
[ 1.869136] input: Asus Laptop extra buttons as /devices/platform/asus_laptop/input/input5
[ 1.876794] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 2.052133] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 2.057400] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 2.061731] TCP: cubic registered
[ 2.065941] Initializing XFRM netlink socket
[ 2.070160] NET: Registered protocol family 17
[ 2.074389] NET: Registered protocol family 15
[ 2.079317] Using IPI No-Shortcut mode
[ 2.084559] registered taskstats version 1
[ 2.089693] Magic number: 14:414:663
[ 2.093714] rtc_cmos 00:02: setting system clock to 2014-01-28 02:41:29 UTC (1390876889)
[ 2.099642] PM: Hibernation image not present or could not be loaded.
[ 2.108361] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.117020] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2.123258] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 2.123265] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.178194] ata1.00: ATA-8: ST9250315AS, 0002SDM1, max UDMA/133
[ 2.181689] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.193554] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2.236550] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 2.236562] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.243835] ata1.00: configured for UDMA/133
[ 2.251210] scsi 0:0:0:0: Direct-Access ATA ST9250315AS 0002 PQ: 0 ANSI: 5
[ 2.257867] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 2.258510] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.264755] sd 0:0:0:0: [sda] Write Protect is off
[ 2.270347] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.270474] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.365384] sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 >
[ 2.371706] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.375577] Freeing unused kernel memory: 388K (c0a12000 - c0a73000)
[ 2.379608] Write protecting the kernel text: 4024k
[ 2.383362] Write protecting the kernel read-only data: 1868k
[ 2.405848] systemd[1]: systemd 197 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 2.410492] systemd[1]: Running in initial RAM disk.
[ 2.427551] systemd[1]: Failed to insert module 'autofs4'
[ 2.431575] systemd[1]: No hostname configured.
[ 2.435581] systemd[1]: Set hostname to <localhost>.
[ 2.440080] random: systemd urandom read with 20 bits of entropy available
[ 2.444106] systemd[1]: Initializing machine ID from random generator.
[ 2.473458] systemd[1]: Starting Encrypted Volumes.
[ 2.482003] systemd[1]: Reached target Encrypted Volumes.
[ 2.486208] systemd[1]: Starting udev Kernel Socket.
[ 2.494631] systemd[1]: Listening on udev Kernel Socket.
[ 2.498776] systemd[1]: Starting udev Control Socket.
[ 2.507174] systemd[1]: Listening on udev Control Socket.
[ 2.511122] systemd[1]: Starting Journal Socket.
[ 2.519523] systemd[1]: Listening on Journal Socket.
[ 2.523360] systemd[1]: Starting dracut cmdline hook...
[ 2.534303] systemd[1]: Started Load Kernel Modules.
[ 2.538225] systemd[1]: Starting Journal Service...
[ 2.554680] systemd[1]: Started Journal Service.
[ 2.559550] systemd[1]: Starting Sockets.
[ 2.567501] systemd[1]: Reached target Sockets.
[ 2.571314] systemd[1]: Starting Swap.
[ 2.579066] systemd[1]: Reached target Swap.
[ 2.582759] systemd[1]: Starting Local File Systems.
[ 2.590455] systemd[1]: Reached target Local File Systems.
[ 2.836522] [drm:intel_crtc_set_config], [CRTC:3] [FB:18] #connectors=1 (x y) (0 0)
[ 2.836530] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
[ 2.836534] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 2.887684] systemd-udevd[126]: starting version 197
[ 2.982862] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000, board id: 3655, fw id: 600854
[ 3.025480] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input13
[ 3.321307] [drm:i915_gem_open],
[ 3.321605] [drm:intel_crtc_cursor_set], cursor off
[ 3.321622] [drm:intel_crtc_set_config], [CRTC:3] [FB:18] #connectors=1 (x y) (0 0)
[ 3.321631] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
[ 3.321637] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 3.321644] [drm:intel_crtc_cursor_set], cursor off
[ 3.321650] [drm:intel_crtc_set_config], [CRTC:4] [NOFB]
[ 3.321656] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0
[ 3.321662] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 3.321720] [drm:i915_gem_open],
[ 3.321758] [drm:intel_crtc_cursor_set], cursor off
[ 3.321766] [drm:intel_crtc_set_config], [CRTC:3] [FB:18] #connectors=1 (x y) (0 0)
[ 3.321772] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
[ 3.321778] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 3.321784] [drm:intel_crtc_cursor_set], cursor off
[ 3.321789] [drm:intel_crtc_set_config], [CRTC:4] [NOFB]
[ 3.321796] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0
[ 3.321801] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 3.321848] [drm:i915_gem_open],
[ 3.322163] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[3] ENCODERS[3]
[ 3.322198] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[3] ENCODERS[3]
[ 3.322221] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 3.322234] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
[ 3.322241] [drm:intel_lvds_detect], [CONNECTOR:5:LVDS-1]
[ 3.322260] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
[ 3.322268] [drm:drm_mode_debug_printmodeline], Modeline 8:"1366x768" 60 71900 1366 1414 1480 1486 768 774 782 806 0x48 0xa
[ 3.322278] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 3.345139] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
[ 3.345152] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
[ 3.345158] [drm:intel_crt_detect], [CONNECTOR:11:VGA-1] force=1
[ 3.352088] [drm:intel_crt_detect], CRT not detected via hotplug
[ 3.356106] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[ 3.356117] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 3.356122] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 3.356128] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[ 3.356481] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 3.356486] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[ 3.356490] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 3.356497] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
[ 3.356514] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
[ 3.356521] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
[ 3.356527] [drm:intel_crt_detect], [CONNECTOR:11:VGA-1] force=1
[ 3.364067] [drm:intel_crt_detect], CRT not detected via hotplug
[ 3.368211] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[ 3.368219] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 3.368224] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 3.368229] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
[ 3.368584] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 3.368589] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
[ 3.368594] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 3.368599] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
[ 3.368622] [drm:drm_mode_getconnector], [CONNECTOR:14:?]
[ 3.368630] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1]
[ 3.368635] [drm:intel_dp_detect], [CONNECTOR:14:DP-1]
[ 3.368642] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1] disconnected
[ 3.368650] [drm:drm_mode_getconnector], [CONNECTOR:14:?]
[ 3.368656] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1]
[ 3.368661] [drm:intel_dp_detect], [CONNECTOR:14:DP-1]
[ 3.368666] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1] disconnected
[ 3.368909] [drm:drm_mode_addfb], [FB:19]
[ 4.904411] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 4.930098] random: nonblocking pool is initialized
[ 5.312789] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 5.704976] systemd-journald[65]: Received SIGTERM
[ 7.367551] type=1404 audit(1390876894.772:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
[ 7.771924] SELinux: 2048 avtab hash slots, 96503 rules.
[ 7.836344] SELinux: 2048 avtab hash slots, 96503 rules.
[ 7.907455] SELinux: 8 users, 83 roles, 4702 types, 269 bools, 1 sens, 1024 cats
[ 7.907464] SELinux: 83 classes, 96503 rules
[ 7.931321] SELinux: Completing initialization.
[ 7.931327] SELinux: Setting up existing superblocks.
[ 7.931530] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[ 7.931704] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
[ 7.931892] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
[ 7.931991] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[ 7.932395] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 7.932578] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
[ 7.934907] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
[ 7.935059] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
[ 7.935602] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
[ 7.935757] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
[ 7.935901] SELinux: initialized (dev aio, type aio), not configured for labeling
[ 7.936023] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
[ 7.936241] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
[ 7.936393] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
[ 7.936557] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[ 7.940482] SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
[ 7.940529] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 7.940549] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 7.940832] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 7.941030] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 7.941095] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 7.941149] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 7.941331] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 7.941406] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 7.941439] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 7.941465] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 7.941539] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 7.941683] SELinux: initialized (dev sda6, type ext4), uses xattr
[ 8.004716] type=1403 audit(1390876895.408:3): policy loaded auid=4294967295 ses=4294967295
[ 8.178538] systemd[1]: Successfully loaded SELinux policy in 880.547ms.
[ 8.509252] systemd[1]: Relabelled /dev and /run in 51.222ms.
[ 11.914586] SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
[ 12.155726] systemd-journald[282]: Vacuuming done, freed 0 bytes
[ 13.257472] EXT4-fs (sda6): re-mounted. Opts: (null)
[ 13.628240] systemd-udevd[317]: starting version 208
[ 14.865342] ACPI: bus type USB registered
[ 14.869790] usbcore: registered new interface driver usbfs
[ 14.874195] usbcore: registered new interface driver hub
[ 14.879590] usbcore: registered new device driver usb
[ 14.901618] atl1c 0000:02:00.0: version 1.0.1.1-NAPI
[ 14.930694] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 14.935848] ehci_hcd: block sizes: qh 80 qtd 96 itd 160 sitd 96
[ 14.945945] uhci_hcd: USB Universal Host Controller Interface driver
[ 14.949688] ehci-pci: EHCI PCI platform driver
[ 14.949782] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 14.950054] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 14.950097] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 14.950129] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000
[ 14.950132] uhci_hcd 0000:00:1a.0: Performing full reset
[ 14.950152] uhci_hcd 0000:00:1a.0: supports USB remote wakeup
[ 14.950277] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000d880
[ 14.951209] usb usb1: default language 0x0409
[ 14.951271] usb usb1: udev 1, busnum 1, minor = 0
[ 14.951276] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 14.951280] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 14.951283] usb usb1: Product: UHCI Host Controller
[ 14.951287] usb usb1: Manufacturer: Linux 3.13.0-rc8AS+ uhci_hcd
[ 14.951290] usb usb1: SerialNumber: 0000:00:1a.0
[ 14.952829] usb usb1: usb_probe_device
[ 14.952834] usb usb1: configuration #1 chosen from 1 choice
[ 14.953367] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 14.953681] hub 1-0:1.0: usb_probe_interface
[ 14.953685] hub 1-0:1.0: usb_probe_interface - got id
[ 14.953705] hub 1-0:1.0: USB hub found
[ 14.954009] hub 1-0:1.0: 2 ports detected
[ 14.954012] hub 1-0:1.0: standalone hub
[ 14.954016] hub 1-0:1.0: no power switching (usb 1.0)
[ 14.954019] hub 1-0:1.0: individual port over-current protection
[ 14.954023] hub 1-0:1.0: power on to power good time: 2ms
[ 14.954495] hub 1-0:1.0: local power source is good
[ 14.956502] usb usb1: usb port1's DeviceRemovable is changed to 1 according to platform information.
[ 14.956507] hub 1-0:1.0: trying to enable port power on non-switchable hub
[ 14.957782] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 14.957802] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[ 14.957815] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 14.957823] uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000
[ 14.957826] uhci_hcd 0000:00:1a.1: Performing full reset
[ 14.957845] uhci_hcd 0000:00:1a.1: supports USB remote wakeup
[ 14.957896] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000d800
[ 14.958084] usb usb2: default language 0x0409
[ 14.958146] usb usb2: udev 1, busnum 2, minor = 128
[ 14.958151] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 14.958155] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 14.958158] usb usb2: Product: UHCI Host Controller
[ 14.958162] usb usb2: Manufacturer: Linux 3.13.0-rc8AS+ uhci_hcd
[ 14.958165] usb usb2: SerialNumber: 0000:00:1a.1
[ 14.958724] usb usb2: usb_probe_device
[ 14.958729] usb usb2: configuration #1 chosen from 1 choice
[ 14.958773] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[ 14.958892] hub 2-0:1.0: usb_probe_interface
[ 14.958896] hub 2-0:1.0: usb_probe_interface - got id
[ 14.958906] hub 2-0:1.0: USB hub found
[ 14.958938] hub 2-0:1.0: 2 ports detected
[ 14.958942] hub 2-0:1.0: standalone hub
[ 14.958945] hub 2-0:1.0: no power switching (usb 1.0)
[ 14.958948] hub 2-0:1.0: individual port over-current protection
[ 14.958952] hub 2-0:1.0: power on to power good time: 2ms
[ 14.958998] hub 2-0:1.0: local power source is good
[ 14.960595] usb usb2: usb port1's DeviceRemovable is changed to 1 according to platform information.
[ 14.960599] hub 2-0:1.0: trying to enable port power on non-switchable hub
[ 14.961239] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 14.961258] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
[ 14.961272] uhci_hcd 0000:00:1a.2: detected 2 ports
[ 14.961280] uhci_hcd 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x0000
[ 14.961283] uhci_hcd 0000:00:1a.2: Performing full reset
[ 14.961302] uhci_hcd 0000:00:1a.2: supports USB remote wakeup
[ 14.961351] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000d480
[ 14.961538] usb usb3: default language 0x0409
[ 14.961600] usb usb3: udev 1, busnum 3, minor = 256
[ 14.961605] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 14.961609] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 14.961612] usb usb3: Product: UHCI Host Controller
[ 14.961615] usb usb3: Manufacturer: Linux 3.13.0-rc8AS+ uhci_hcd
[ 14.961618] usb usb3: SerialNumber: 0000:00:1a.2
[ 14.962038] usb usb3: usb_probe_device
[ 14.962043] usb usb3: configuration #1 chosen from 1 choice
[ 14.962085] usb usb3: adding 3-0:1.0 (config #1, interface 0)
[ 14.962197] hub 3-0:1.0: usb_probe_interface
[ 14.962201] hub 3-0:1.0: usb_probe_interface - got id
[ 14.962211] hub 3-0:1.0: USB hub found
[ 14.962242] hub 3-0:1.0: 2 ports detected
[ 14.962246] hub 3-0:1.0: standalone hub
[ 14.962249] hub 3-0:1.0: no power switching (usb 1.0)
[ 14.962252] hub 3-0:1.0: individual port over-current protection
[ 14.962256] hub 3-0:1.0: power on to power good time: 2ms
[ 14.962302] hub 3-0:1.0: local power source is good
[ 14.963873] usb usb3: usb port2's DeviceRemovable is changed to 1 according to platform information.
[ 14.963877] hub 3-0:1.0: trying to enable port power on non-switchable hub
[ 14.964524] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 14.964544] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 14.964557] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 14.964565] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
[ 14.964568] uhci_hcd 0000:00:1d.0: Performing full reset
[ 14.964587] uhci_hcd 0000:00:1d.0: supports USB remote wakeup
[ 14.964636] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d400
[ 14.964824] usb usb4: default language 0x0409
[ 14.964887] usb usb4: udev 1, busnum 4, minor = 384
[ 14.964891] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 14.964895] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 14.964898] usb usb4: Product: UHCI Host Controller
[ 14.964901] usb usb4: Manufacturer: Linux 3.13.0-rc8AS+ uhci_hcd
[ 14.964904] usb usb4: SerialNumber: 0000:00:1d.0
[ 14.965420] usb usb4: usb_probe_device
[ 14.965425] usb usb4: configuration #1 chosen from 1 choice
[ 14.965469] usb usb4: adding 4-0:1.0 (config #1, interface 0)
[ 14.965582] hub 4-0:1.0: usb_probe_interface
[ 14.965585] hub 4-0:1.0: usb_probe_interface - got id
[ 14.965595] hub 4-0:1.0: USB hub found
[ 14.965626] hub 4-0:1.0: 2 ports detected
[ 14.965630] hub 4-0:1.0: standalone hub
[ 14.965633] hub 4-0:1.0: no power switching (usb 1.0)
[ 14.965636] hub 4-0:1.0: individual port over-current protection
[ 14.965640] hub 4-0:1.0: power on to power good time: 2ms
[ 14.965686] hub 4-0:1.0: local power source is good
[ 14.967249] hub 4-0:1.0: trying to enable port power on non-switchable hub
[ 14.967863] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 14.967881] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
[ 14.967895] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 14.967903] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
[ 14.967906] uhci_hcd 0000:00:1d.1: Performing full reset
[ 14.967925] uhci_hcd 0000:00:1d.1: supports USB remote wakeup
[ 14.967940] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d080
[ 14.968145] usb usb5: default language 0x0409
[ 14.968207] usb usb5: udev 1, busnum 5, minor = 512
[ 14.968211] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 14.968215] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 14.968218] usb usb5: Product: UHCI Host Controller
[ 14.968222] usb usb5: Manufacturer: Linux 3.13.0-rc8AS+ uhci_hcd
[ 14.968225] usb usb5: SerialNumber: 0000:00:1d.1
[ 14.968651] usb usb5: usb_probe_device
[ 14.968656] usb usb5: configuration #1 chosen from 1 choice
[ 14.968700] usb usb5: adding 5-0:1.0 (config #1, interface 0)
[ 14.968809] hub 5-0:1.0: usb_probe_interface
[ 14.968813] hub 5-0:1.0: usb_probe_interface - got id
[ 14.968823] hub 5-0:1.0: USB hub found
[ 14.968854] hub 5-0:1.0: 2 ports detected
[ 14.968858] hub 5-0:1.0: standalone hub
[ 14.968861] hub 5-0:1.0: no power switching (usb 1.0)
[ 14.968864] hub 5-0:1.0: individual port over-current protection
[ 14.968868] hub 5-0:1.0: power on to power good time: 2ms
[ 14.968914] hub 5-0:1.0: local power source is good
[ 14.970479] hub 5-0:1.0: trying to enable port power on non-switchable hub
[ 14.971099] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 14.971118] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
[ 14.971131] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 14.971139] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
[ 14.971142] uhci_hcd 0000:00:1d.2: Performing full reset
[ 14.971161] uhci_hcd 0000:00:1d.2: supports USB remote wakeup
[ 14.971209] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d000
[ 14.971422] usb usb6: default language 0x0409
[ 14.971484] usb usb6: udev 1, busnum 6, minor = 640
[ 14.971488] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 14.971492] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 14.971495] usb usb6: Product: UHCI Host Controller
[ 14.971499] usb usb6: Manufacturer: Linux 3.13.0-rc8AS+ uhci_hcd
[ 14.971502] usb usb6: SerialNumber: 0000:00:1d.2
[ 14.971916] usb usb6: usb_probe_device
[ 14.971921] usb usb6: configuration #1 chosen from 1 choice
[ 14.971963] usb usb6: adding 6-0:1.0 (config #1, interface 0)
[ 14.972087] hub 6-0:1.0: usb_probe_interface
[ 14.972091] hub 6-0:1.0: usb_probe_interface - got id
[ 14.972101] hub 6-0:1.0: USB hub found
[ 14.972132] hub 6-0:1.0: 2 ports detected
[ 14.972135] hub 6-0:1.0: standalone hub
[ 14.972138] hub 6-0:1.0: no power switching (usb 1.0)
[ 14.972141] hub 6-0:1.0: individual port over-current protection
[ 14.972146] hub 6-0:1.0: power on to power good time: 2ms
[ 14.972191] hub 6-0:1.0: local power source is good
[ 14.973766] hub 6-0:1.0: trying to enable port power on non-switchable hub
[ 15.157425] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 15.157429] uhci_hcd 0000:00:1a.1: port 1 portsc 0093,00
[ 15.157468] hub 2-0:1.0: port 1: status 0101 change 0001
[ 15.158385] hub 1-0:1.0: hub_suspend
[ 15.158747] usb usb1: bus auto-suspend, wakeup 1
[ 15.158769] usb usb1: suspend_rh
[ 15.158865] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 15.158889] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 15.158905] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 15.158920] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 15.158945] hub 3-0:1.0: hub_suspend
[ 15.159201] usb usb3: bus auto-suspend, wakeup 1
[ 15.159211] usb usb3: suspend_rh
[ 15.159258] hub 4-0:1.0: hub_suspend
[ 15.159607] usb usb4: bus auto-suspend, wakeup 1
[ 15.159617] usb usb4: suspend_rh
[ 15.159666] hub 5-0:1.0: hub_suspend
[ 15.159686] usb usb5: bus auto-suspend, wakeup 1
[ 15.159696] usb usb5: suspend_rh
[ 15.159739] hub 6-0:1.0: hub_suspend
[ 15.159775] usb usb6: bus auto-suspend, wakeup 1
[ 15.159781] usb usb6: suspend_rh
[ 15.166329] usb usb1: usb auto-resume
[ 15.166347] usb usb1: wakeup_rh
[ 15.188203] hub 1-0:1.0: hub_resume
[ 15.188951] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 15.189085] usb usb1: unregistering interface 1-0:1.0
[ 15.199838] uhci_hcd 0000:00:1a.0: shutdown urb f4a37980 ep1in-intr
[ 15.203752] usb usb1: usb_disable_device nuking non-ep0 URBs
[ 15.204854] Intel(R) Wireless WiFi driver for Linux, in-tree:d
[ 15.208156] Copyright(c) 2003-2013 Intel Corporation
[ 15.209034] usb usb1: bus auto-suspend, wakeup 0
[ 15.209039] usb usb1: suspend_rh
[ 15.209070] usb usb2: unregistering interface 2-0:1.0
[ 15.210019] usb usb2: usb_disable_device nuking non-ep0 URBs
[ 15.212410] usb usb2: bus auto-suspend, wakeup 0
[ 15.212422] usb usb2: suspend_rh
[ 15.212461] usb usb3: usb auto-resume
[ 15.212471] usb usb3: wakeup_rh
[ 15.214762] iwlwifi 0000:01:00.0: irq 42 for MSI/MSI-X
[ 15.236177] hub 3-0:1.0: hub_resume
[ 15.236694] usb usb3: unregistering interface 3-0:1.0
[ 15.254273] uhci_hcd 0000:00:1a.2: shutdown urb f48c7580 ep1in-intr
[ 15.270377] usb usb3: usb_disable_device nuking non-ep0 URBs
[ 15.270791] usb usb3: bus auto-suspend, wakeup 0
[ 15.270802] usb usb3: suspend_rh
[ 15.270853] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 15.276340] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 7
[ 15.280587] ehci-pci 0000:00:1a.7: debug port 1
[ 15.283668] ehci-pci 0000:00:1a.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
[ 15.283681] ehci-pci 0000:00:1a.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr hw prefetch
[ 15.283922] ehci-pci 0000:00:1a.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 15.289904] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported
[ 15.289916] ehci-pci 0000:00:1a.7: supports USB remote wakeup
[ 15.289959] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfe9fbc00
[ 15.293459] ehci-pci 0000:00:1a.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
[ 15.299409] iwlwifi 0000:01:00.0: loaded firmware version 39.31.5.1 build 35138 op_mode iwldvm
[ 15.311066] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 15.315936] usb usb7: default language 0x0409
[ 15.316103] usb usb7: udev 1, busnum 7, minor = 768
[ 15.316115] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
[ 15.319286] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 15.326071] usb usb7: Product: EHCI Host Controller
[ 15.329268] usb usb7: Manufacturer: Linux 3.13.0-rc8AS+ ehci_hcd
[ 15.332793] usb usb7: SerialNumber: 0000:00:1a.7
[ 15.343005] usb usb7: usb_probe_device
[ 15.343019] usb usb7: configuration #1 chosen from 1 choice
[ 15.348664] usb usb7: adding 7-0:1.0 (config #1, interface 0)
[ 15.351128] hub 7-0:1.0: usb_probe_interface
[ 15.351136] hub 7-0:1.0: usb_probe_interface - got id
[ 15.351482] hub 7-0:1.0: USB hub found
[ 15.357834] hub 7-0:1.0: 6 ports detected
[ 15.361000] hub 7-0:1.0: standalone hub
[ 15.361010] hub 7-0:1.0: no power switching (usb 1.0)
[ 15.361016] hub 7-0:1.0: individual port over-current protection
[ 15.361027] hub 7-0:1.0: power on to power good time: 20ms
[ 15.362005] hub 7-0:1.0: local power source is good
[ 15.381721] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUG enabled
[ 15.384980] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[ 15.388132] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
[ 15.391233] iwlwifi 0000:01:00.0: Detected Intel(R) Centrino(R) Wireless-N 1000 BGN, REV=0x6C
[ 15.396668] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[ 15.460954] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 15.467116] usb usb7: usb port1's DeviceRemovable is changed to 1 according to platform information.
[ 15.467129] usb usb7: usb port3's DeviceRemovable is changed to 1 according to platform information.
[ 15.467135] usb usb7: usb port6's DeviceRemovable is changed to 1 according to platform information.
[ 15.467145] hub 7-0:1.0: trying to enable port power on non-switchable hub
[ 15.481433] ehci-pci 0000:00:1a.7: HS companion for 0000:00:1a.0
[ 15.481451] usb usb1: usb auto-resume
[ 15.481458] usb usb1: wakeup_rh
[ 15.504378] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 15.504574] hub 1-0:1.0: usb_probe_interface
[ 15.504581] hub 1-0:1.0: usb_probe_interface - got id
[ 15.504601] hub 1-0:1.0: USB hub found
[ 15.510934] hub 1-0:1.0: 2 ports detected
[ 15.514190] hub 1-0:1.0: standalone hub
[ 15.514201] hub 1-0:1.0: no power switching (usb 1.0)
[ 15.514206] hub 1-0:1.0: individual port over-current protection
[ 15.514217] hub 1-0:1.0: power on to power good time: 2ms
[ 15.514916] hub 1-0:1.0: local power source is good
[ 15.517170] usb usb1: usb port1's DeviceRemovable is changed to 1 according to platform information.
[ 15.517182] hub 1-0:1.0: trying to enable port power on non-switchable hub
[ 15.527594] ehci-pci 0000:00:1a.7: HS companion for 0000:00:1a.1
[ 15.527617] usb usb2: usb auto-resume
[ 15.527623] usb usb2: wakeup_rh
[ 15.548490] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[ 15.548938] hub 2-0:1.0: usb_probe_interface
[ 15.548948] hub 2-0:1.0: usb_probe_interface - got id
[ 15.548972] hub 2-0:1.0: USB hub found
[ 15.552356] hub 2-0:1.0: 2 ports detected
[ 15.555366] hub 2-0:1.0: standalone hub
[ 15.555371] hub 2-0:1.0: no power switching (usb 1.0)
[ 15.555376] hub 2-0:1.0: individual port over-current protection
[ 15.555387] hub 2-0:1.0: power on to power good time: 2ms
[ 15.555465] hub 2-0:1.0: local power source is good
[ 15.557658] usb usb2: usb port1's DeviceRemovable is changed to 1 according to platform information.
[ 15.557669] hub 2-0:1.0: trying to enable port power on non-switchable hub
[ 15.558350] ehci-pci 0000:00:1a.7: HS companion for 0000:00:1a.2
[ 15.558365] usb usb3: usb auto-resume
[ 15.558371] usb usb3: wakeup_rh
[ 15.568345] ehci-pci 0000:00:1a.7: GetStatus port:3 status 001803 0 ACK POWER sig=j CSC CONNECT
[ 15.568383] hub 7-0:1.0: port 3: status 0501 change 0001
[ 15.580437] usb usb3: adding 3-0:1.0 (config #1, interface 0)
[ 15.580872] hub 3-0:1.0: usb_probe_interface
[ 15.580883] hub 3-0:1.0: usb_probe_interface - got id
[ 15.580900] hub 3-0:1.0: USB hub found
[ 15.584226] hub 3-0:1.0: 2 ports detected
[ 15.587250] hub 3-0:1.0: standalone hub
[ 15.587255] hub 3-0:1.0: no power switching (usb 1.0)
[ 15.587264] hub 3-0:1.0: individual port over-current protection
[ 15.587271] hub 3-0:1.0: power on to power good time: 2ms
[ 15.587708] hub 3-0:1.0: local power source is good
[ 15.589871] usb usb3: usb port2's DeviceRemovable is changed to 1 according to platform information.
[ 15.589882] hub 3-0:1.0: trying to enable port power on non-switchable hub
[ 15.590951] usb usb4: usb auto-resume
[ 15.590963] usb usb4: wakeup_rh
[ 15.612082] hub 4-0:1.0: hub_resume
[ 15.612310] usb usb4: unregistering interface 4-0:1.0
[ 15.612322] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 15.612603] uhci_hcd 0000:00:1d.0: shutdown urb f48c7000 ep1in-intr
[ 15.613126] usb usb4: usb_disable_device nuking non-ep0 URBs
[ 15.613181] usb usb4: bus auto-suspend, wakeup 0
[ 15.613188] usb usb4: suspend_rh
[ 15.613225] usb usb5: usb auto-resume
[ 15.613232] usb usb5: wakeup_rh
[ 15.638390] hub 5-0:1.0: hub_resume
[ 15.638514] usb usb5: unregistering interface 5-0:1.0
[ 15.638899] uhci_hcd 0000:00:1d.1: shutdown urb f6f76280 ep1in-intr
[ 15.639558] usb usb5: usb_disable_device nuking non-ep0 URBs
[ 15.642736] usb usb5: bus auto-suspend, wakeup 0
[ 15.642744] usb usb5: suspend_rh
[ 15.642783] usb usb6: usb auto-resume
[ 15.642789] usb usb6: wakeup_rh
[ 15.656085] uhci_hcd 0000:00:1a.1: port 1 portsc 0082,00
[ 15.664088] hub 6-0:1.0: hub_resume
[ 15.664195] usb usb6: unregistering interface 6-0:1.0
[ 15.664554] uhci_hcd 0000:00:1d.2: shutdown urb f6f76b80 ep1in-intr
[ 15.665260] usb usb6: usb_disable_device nuking non-ep0 URBs
[ 15.665561] usb usb6: bus auto-suspend, wakeup 0
[ 15.665568] usb usb6: suspend_rh
[ 15.665609] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 15.668779] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 8
[ 15.671874] ehci-pci 0000:00:1d.7: debug port 1
[ 15.675013] ehci-pci 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
[ 15.675026] ehci-pci 0000:00:1d.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr hw prefetch
[ 15.675159] ehci-pci 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 15.677935] microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa07
[ 15.679066] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[ 15.679070] ehci-pci 0000:00:1d.7: supports USB remote wakeup
[ 15.679090] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfe9fb800
[ 15.679098] ehci-pci 0000:00:1d.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
[ 15.688076] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 15.691601] usb usb8: default language 0x0409
[ 15.691711] usb usb8: udev 1, busnum 8, minor = 896
[ 15.691723] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
[ 15.694843] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 15.697942] usb usb8: Product: EHCI Host Controller
[ 15.701028] usb usb8: Manufacturer: Linux 3.13.0-rc8AS+ ehci_hcd
[ 15.704254] usb usb8: SerialNumber: 0000:00:1d.7
[ 15.708463] usb usb8: usb_probe_device
[ 15.708471] usb usb8: configuration #1 chosen from 1 choice
[ 15.709555] usb usb8: adding 8-0:1.0 (config #1, interface 0)
[ 15.711010] hub 8-0:1.0: usb_probe_interface
[ 15.711018] hub 8-0:1.0: usb_probe_interface - got id
[ 15.711036] hub 8-0:1.0: USB hub found
[ 15.714447] hub 8-0:1.0: 6 ports detected
[ 15.717625] hub 8-0:1.0: standalone hub
[ 15.717635] hub 8-0:1.0: no power switching (usb 1.0)
[ 15.717640] hub 8-0:1.0: individual port over-current protection
[ 15.717652] hub 8-0:1.0: power on to power good time: 20ms
[ 15.717973] hub 8-0:1.0: local power source is good
[ 15.725545] hub 8-0:1.0: trying to enable port power on non-switchable hub
[ 15.726133] ehci-pci 0000:00:1d.7: HS companion for 0000:00:1d.0
[ 15.726149] usb usb4: usb auto-resume
[ 15.726155] usb usb4: wakeup_rh
[ 15.739082] microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa07
[ 15.742858] microcode: CPU0 updated to revision 0xa0b, date = 2010-09-28
[ 15.755635] usb usb4: adding 4-0:1.0 (config #1, interface 0)
[ 15.756105] hub 4-0:1.0: usb_probe_interface
[ 15.756116] hub 4-0:1.0: usb_probe_interface - got id
[ 15.756132] hub 4-0:1.0: USB hub found
[ 15.758704] microcode: CPU1 sig=0x1067a, pf=0x80, revision=0xa07
[ 15.758899] microcode: CPU1 sig=0x1067a, pf=0x80, revision=0xa07
[ 15.760016] microcode: CPU1 updated to revision 0xa0b, date = 2010-09-28
[ 15.770617] microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
[ 15.781823] hub 4-0:1.0: 2 ports detected
[ 15.785068] hub 4-0:1.0: standalone hub
[ 15.785077] hub 4-0:1.0: no power switching (usb 1.0)
[ 15.785082] hub 4-0:1.0: individual port over-current protection
[ 15.785093] hub 4-0:1.0: power on to power good time: 2ms
[ 15.785162] hub 4-0:1.0: local power source is good
[ 15.795422] hub 4-0:1.0: trying to enable port power on non-switchable hub
[ 15.795695] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 15.795921] hub 7-0:1.0: state 7 ports 6 chg 0008 evt 0000
[ 15.796254] hub 7-0:1.0: port 3, status 0501, change 0000, 480 Mb/s
[ 15.796657] hub 1-0:1.0: hub_suspend
[ 15.800045] usb usb1: bus auto-suspend, wakeup 1
[ 15.800058] usb usb1: suspend_rh
[ 15.800816] ehci-pci 0000:00:1d.7: HS companion for 0000:00:1d.1
[ 15.801939] usb usb5: usb auto-resume
[ 15.801950] usb usb5: wakeup_rh
[ 15.824171] usb usb5: adding 5-0:1.0 (config #1, interface 0)
[ 15.824299] hub 5-0:1.0: usb_probe_interface
[ 15.824306] hub 5-0:1.0: usb_probe_interface - got id
[ 15.824318] hub 5-0:1.0: USB hub found
[ 15.827493] hub 5-0:1.0: 2 ports detected
[ 15.831766] hub 5-0:1.0: standalone hub
[ 15.831776] hub 5-0:1.0: no power switching (usb 1.0)
[ 15.831781] hub 5-0:1.0: individual port over-current protection
[ 15.831792] hub 5-0:1.0: power on to power good time: 2ms
[ 15.831882] hub 5-0:1.0: local power source is good
[ 15.839125] hub 5-0:1.0: trying to enable port power on non-switchable hub
[ 15.839455] ehci-pci 0000:00:1d.7: HS companion for 0000:00:1d.2
[ 15.839471] usb usb6: usb auto-resume
[ 15.839481] usb usb6: wakeup_rh
[ 15.856817] ehci-pci 0000:00:1a.7: port 3 reset complete, port enabled
[ 15.856830] ehci-pci 0000:00:1a.7: GetStatus port:3 status 001005 0 ACK POWER sig=se0 PE CONNECT
[ 15.860203] usb usb6: adding 6-0:1.0 (config #1, interface 0)
[ 15.862062] hub 6-0:1.0: usb_probe_interface
[ 15.862074] hub 6-0:1.0: usb_probe_interface - got id
[ 15.862090] hub 6-0:1.0: USB hub found
[ 15.867325] hub 6-0:1.0: 2 ports detected
[ 15.871108] hub 6-0:1.0: standalone hub
[ 15.871119] hub 6-0:1.0: no power switching (usb 1.0)
[ 15.871124] hub 6-0:1.0: individual port over-current protection
[ 15.871135] hub 6-0:1.0: power on to power good time: 2ms
[ 15.871506] hub 6-0:1.0: local power source is good
[ 15.877188] hub 6-0:1.0: trying to enable port power on non-switchable hub
[ 15.912464] usb 7-3: new high-speed USB device number 2 using ehci-pci
[ 16.020318] ehci-pci 0000:00:1a.7: port 3 reset complete, port enabled
[ 16.020331] ehci-pci 0000:00:1a.7: GetStatus port:3 status 001005 0 ACK POWER sig=se0 PE CONNECT
[ 16.140367] usb 7-3: skipped 1 descriptor after configuration
[ 16.140379] usb 7-3: skipped 6 descriptors after interface
[ 16.140389] usb 7-3: skipped 1 descriptor after endpoint
[ 16.140395] usb 7-3: skipped 8 descriptors after interface
[ 16.141107] usb 7-3: default language 0x0409
[ 16.144756] irq 16: nobody cared (try booting with the "irqpoll" option)
[ 16.147913] CPU: 0 PID: 282 Comm: systemd-journal Tainted: G W 3.13.0-rc8AS+ #2
[ 16.148039] Hardware name: ASUSTeK Computer Inc. UL20A /UL20A , BIOS 207 11/02/2009
[ 16.148039] 00000000 00000000 f494df04 c07e66d6 f506dc00 f494df18 c04675c7 f506dc00
[ 16.148039] 00000000 00000010 f494df34 c0467936 52559448 fffeeacc f506dc00 00000010
[ 16.148039] 00000000 f494df54 c0466052 00000000 00000000 00000000 f506dc00 f506dc54
[ 16.148039] Call Trace:
[ 16.148039] [<c07e66d6>] dump_stack+0x48/0x69
[ 16.148039] [<c04675c7>] __report_bad_irq+0x14/0x9e
[ 16.148039] [<c0467936>] note_interrupt+0x137/0x1b5
[ 16.148039] [<c0466052>] handle_irq_event_percpu+0xc5/0x107
[ 16.148039] [<c04660c0>] handle_irq_event+0x2c/0x44
[ 16.148039] [<c04680f8>] handle_fasteoi_irq+0x6a/0x97
[ 16.148039] [<c040336d>] handle_irq+0x9a/0xa9
[ 16.148039] [<c0402f02>] do_IRQ+0x35/0x80
[ 16.148039] [<c07ece38>] common_interrupt+0x38/0x3d
[ 16.148039] handlers:
[ 16.148039] [<f8486e56>] usb_hcd_irq [usbcore]
[ 16.148039] Disabling IRQ #16
[ 16.205482] usb 7-3: udev 2, busnum 7, minor = 769
[ 16.205491] usb 7-3: New USB device found, idVendor=04f2, idProduct=b036
[ 16.208712] usb 7-3: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 16.211902] usb 7-3: Product: USB2.0 0.3M UVC WebCam
[ 16.217224] usb 7-3: Manufacturer: Chicony Electronics Co., Ltd.
[ 16.220504] usb 7-3: SerialNumber: SN0001
[ 16.225115] usb 7-3: usb_probe_device
[ 16.225123] usb 7-3: configuration #1 chosen from 1 choice
[ 16.225503] usb 7-3: adding 7-3:1.0 (config #1, interface 0)
[ 16.228721] usb 7-3: adding 7-3:1.1 (config #1, interface 1)
[ 16.228957] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 16.228977] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 16.228989] hub 8-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 16.229002] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 16.229013] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 16.229025] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 16.229056] hub 3-0:1.0: hub_suspend
[ 16.229101] usb usb3: bus auto-suspend, wakeup 1
[ 16.229109] usb usb3: suspend_rh
[ 16.229148] hub 2-0:1.0: hub_suspend
[ 16.229171] hub 8-0:1.0: hub_suspend
[ 16.229227] usb usb8: bus auto-suspend, wakeup 1
[ 16.229233] ehci-pci 0000:00:1d.7: suspend root hub
[ 16.229587] usb usb2: bus auto-suspend, wakeup 1
[ 16.229594] usb usb2: suspend_rh
[ 16.229632] hub 4-0:1.0: hub_suspend
[ 16.229669] usb usb4: bus auto-suspend, wakeup 1
[ 16.229675] usb usb4: suspend_rh
[ 16.229711] hub 5-0:1.0: hub_suspend
[ 16.229745] usb usb5: bus auto-suspend, wakeup 1
[ 16.229751] usb usb5: suspend_rh
[ 16.229788] hub 6-0:1.0: hub_suspend
[ 16.229816] usb usb6: bus auto-suspend, wakeup 1
[ 16.229822] usb usb6: suspend_rh
[ 17.711386] SELinux: initialized (dev sda5, type vfat), uses genfs_contexts
[ 17.822312] Adding 8389624k swap on /dev/sda7. Priority:-1 extents:1 across:8389624k
[ 18.024163] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
[ 18.027887] SELinux: initialized (dev sda8, type ext4), uses xattr
[ 18.151400] systemd-journald[282]: Received request to flush runtime journal from PID 1
[ 26.044840] atl1c 0000:02:00.0: irq 43 for MSI/MSI-X
[ 26.106112] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[ 26.119174] iwlwifi 0000:01:00.0: Radio type=0x0-0x0-0x3
[ 26.147690] uhci_hcd 0000:00:1a.0: uhci_pci_suspend
[ 26.148945] uhci_hcd 0000:00:1a.0: hcd_pci_runtime_suspend: 0
[ 26.149461] uhci_hcd 0000:00:1a.1: uhci_pci_suspend
[ 26.149819] uhci_hcd 0000:00:1a.1: hcd_pci_runtime_suspend: 0
[ 26.150146] uhci_hcd 0000:00:1a.2: uhci_pci_suspend
[ 26.150500] uhci_hcd 0000:00:1a.2: hcd_pci_runtime_suspend: 0
[ 26.151003] uhci_hcd 0000:00:1d.0: uhci_pci_suspend
[ 26.151357] uhci_hcd 0000:00:1d.0: hcd_pci_runtime_suspend: 0
[ 26.159322] uhci_hcd 0000:00:1d.1: uhci_pci_suspend
[ 26.159712] uhci_hcd 0000:00:1d.1: hcd_pci_runtime_suspend: 0
[ 26.160456] uhci_hcd 0000:00:1d.2: uhci_pci_suspend
[ 26.160817] uhci_hcd 0000:00:1d.2: hcd_pci_runtime_suspend: 0
[ 26.161509] ehci-pci 0000:00:1d.7: hcd_pci_runtime_suspend: 0
[ 26.170915] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[ 26.181260] iwlwifi 0000:01:00.0: Radio type=0x0-0x0-0x3
[ 26.497283] [drm:intel_crtc_cursor_set], cursor off
[ 26.497295] [drm:intel_crtc_set_config], [CRTC:3] [FB:18] #connectors=1 (x y) (0 0)
[ 26.497308] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
[ 26.497315] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 26.497322] [drm:intel_crtc_cursor_set], cursor off
[ 26.497328] [drm:intel_crtc_set_config], [CRTC:4] [NOFB]
[ 26.497335] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0
[ 26.497340] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 28.080977] wlan0: authenticate with 00:13:46:48:f3:2a
[ 28.098806] wlan0: send auth to 00:13:46:48:f3:2a (try 1/3)
[ 28.115212] wlan0: authenticated
[ 28.120714] iwlwifi 0000:01:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[ 28.125133] iwlwifi 0000:01:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 28.129623] iwlwifi 0000:01:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 28.129631] wlan0: waiting for beacon from 00:13:46:48:f3:2a
[ 28.164446] wlan0: associate with 00:13:46:48:f3:2a (try 1/3)
[ 28.172261] wlan0: RX AssocResp from 00:13:46:48:f3:2a (capab=0x431 status=0 aid=7)
[ 28.181997] wlan0: associated
[ 54.210942] type=1006 audit(1390876941.289:4): pid=483 uid=0 old auid=4294967295 new auid=1000 old ses=4294967295 new ses=1 res=1

Next message: Christoph Fritz: "[PATCH] ARM: dts: fix omap3 clock multiplier for dpll4_m2x2_ck"
Previous message: Felipe Balbi: "Re: [PATCH 1/2] usb: dwc3: core: continue probing if usb phy libraryreturns -ENODEV/-ENXIO"
In reply to: Alan Stern: "Re: Excessive WARN()s in Intel 915 driver"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]