Re: [PATCH 3/4] mtd: block2mtd: check device size
From: Fabian Frederick
Date: Wed Jan 29 2014 - 15:50:02 EST
On Wed, 29 Jan 2014 07:04:25 -0300
Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx> wrote:
> Hi Fabian,
>
> I saw you sent a v2 for one of the patches on this series,
> but maybe this is worth considering too.
>
> On Thu, Jan 23, 2014 at 08:53:31PM +0100, Fabian Frederick wrote:
> [..]
> > -/* FIXME: ensure that mtd->size % erase_size == 0 */
> > static struct block2mtd_dev *add_device(char *devname, int erase_size)
> > {
> > const fmode_t mode = FMODE_READ | FMODE_WRITE | FMODE_EXCL;
> > @@ -250,6 +249,11 @@ static struct block2mtd_dev *add_device(char *devname, int erase_size)
> > goto devinit_err1;
> > }
> >
> > + if ((long)dev->blkdev->bd_inode->i_size % erase_size) {
> > + pr_err("erasesize muse be a divisor of device size\n");
> > + goto devinit_err1;
> > + }
> > +
>
> Brian: What do you think?
>
> Fabian: Have you tested this patch? Can you elaborate a bit more about
> the effect it would have, compared to the current behavior?
Hi Ezequiel,
This patch was tested with the following commands :
rmmod block2mtd;modprobe block2mtd block2mtd=/dev/loop0,<erasesize>;dmesg
with both correct and incorrect values.It tries to address the fixme
comment above the function.
(/* FIXME: ensure that mtd->size % erase_size == 0 */)
From what I understand, global size must be a multiple of
erase_size when it comes to any MTD I/O operations. If Brian finds this one
interesting I can repost it with current error names against l2-mtd.git/next
AFAICS, current behavior let any value work...
PS : This would need further testing (eg boot command).
Regards,
Fabian
> --
> Ezequiel García, Free Electrons
> Embedded Linux, Kernel and Android Engineering
> http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/