Re: [PATCH] arm: document "mach-virt" platform.

[Marc Zyngier]

Hi Ian,

On 30/01/14 16:11, Ian Campbell wrote:
> mach-virt has existed for a while but it is not written down what it actually
> consists of. Although it seems a bit unusual to document a binding for an
> entire platform since mach-virt is entirely virtual it is helpful to have
> something to refer to in the absence of a single concrete implementation.
> 
> I've done my best to capture the requirements based on the git log and my
> memory/understanding.
> 
> While here remove the xenvm dts example, the Xen tools will now build a
> suitable mach-virt compatible dts when launching the guest.
> 
> Signed-off-by: Ian Campbell <ian.campbell@xxxxxxxxxx>
> Cc: Rob Herring <robh+dt@xxxxxxxxxx>
> Cc: Pawel Moll <pawel.moll@xxxxxxx>
> Cc: Mark Rutland <mark.rutland@xxxxxxx>
> Cc: Kumar Gala <galak@xxxxxxxxxxxxxx>
> Cc: Olof Johansson <olof@xxxxxxxxx>
> Cc: Arnd Bergmann <arnd@xxxxxxxx>
> Cc: Marc Zyngier <marc.zyngier@xxxxxxx>
> Cc: Will Deacon <will.deacon@xxxxxxx>
> Cc: Stefano Stabellini <stefano.stabellini@xxxxxxxxxxxxx>
> Cc: devicetree@xxxxxxxxxxxxxxx
> Cc: linux-kernel@xxxxxxxxxxxxxxx
> Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> ---
> I'm not sure which tree this sort of thing should go though, sorry for the
> huge Cc.
> ---
>  .../devicetree/bindings/arm/mach-virt.txt          |   32 ++++++++
>  arch/arm/boot/dts/xenvm-4.2.dts                    |   81 --------------------
>  2 files changed, 32 insertions(+), 81 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/arm/mach-virt.txt
>  delete mode 100644 arch/arm/boot/dts/xenvm-4.2.dts
> 
> diff --git a/Documentation/devicetree/bindings/arm/mach-virt.txt b/Documentation/devicetree/bindings/arm/mach-virt.txt
> new file mode 100644
> index 0000000..562bcda
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/mach-virt.txt
> @@ -0,0 +1,32 @@
> +* Mach-virt "Dummy Virtual Machine" platform
> +
> +"mach-virt" is the smallest, dumbest platform possible, to be used as
> +a guest for Xen, KVM and other hypervisors. It has no
> +properties/functionality of its own and is driven entirely by device
> +tree.
> +
> +This document defines the requirements for such a platform.
> +
> +* Required properties:
> +
> +- compatible: should be one of:
> +	"linux,dummy-virt"
> +	"xen,xenvm"
> +
> +In addition to the standard nodes (chosen, cpus, memory etc) the
> +platform is required to provide certain other basic functionality
> +which must be described in the device tree:
> +
> +    The platform must provide an ARM Generic Interrupt Controller
> +    (GIC), defined in Documentation/devicetree/bindings/arm/gic.txt.
> +
> +    The platform must provide ARM architected timer, defined in
> +    Documentation/devicetree/bindings/arm/arch_timer.txt.
> +
> +    If the platform is SMP then it must provide the Power State
> +    Coordination Interface (PSCI) described in
> +    Documentation/devicetree/bindings/arm/psci.txt.

I'm afraid I disagree with most of the above. The whole point of
mach-virt is to provide a shell for DT platforms. None of this hardware
is mandated. Instead, all the necessary information should be described
in DT.

Actually, mach-virt doesn't really stand for Virtual Machine. It stands
for virtual mach-* directory! Eventually, mach-virt should become the
default platform, the one we use when we don't match anything else in
the kernel

What you've described here are requirements for a hypervisor like Xen or
KVM. mach-virt itself shouldn't have any of that.

Cheers,

	M.
-- 
Jazz is not dead. It just smells funny...
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/