Re: [PATCH v2 3/5] spi: sunxi: Add Allwinner A31 SPI controllerdriver

[Maxime Ripard]

Hi Kevin,

On Thu, Jan 30, 2014 at 03:52:16PM -0800, Kevin Hilman wrote:
> On Wed, Jan 29, 2014 at 5:32 AM, Maxime Ripard
> <maxime.ripard@xxxxxxxxxxxxxxxxxx> wrote:
> > On Wed, Jan 29, 2014 at 12:25:20PM +0000, Mark Brown wrote:
> >> On Wed, Jan 29, 2014 at 12:10:48PM +0100, Maxime Ripard wrote:
> >>
> >> > +config SPI_SUN6I
> >> > +   tristate "Allwinner A31 SPI controller"
> >> > +   depends on ARCH_SUNXI || COMPILE_TEST
> >> > +   select PM_RUNTIME
> >> > +   help
> >> > +     This enables using the SPI controller on the Allwinner A31 SoCs.
> >> > +
> >>
> >> A select of PM_RUNTIME is both surprising and odd - why is that there?
> >> The usual idiom is that the device starts out powered up (flagged using
> >> pm_runtime_set_active()) and then runtime PM then suspends it when it's
> >> compiled in.  That way if for some reason people want to avoid runtime
> >> PM they can still use the device.
> >
> > Since pm_runtime_set_active and all the pm_runtime* callbacks in
> > general are defined to pretty much empty functions, how the
> > suspend/resume callbacks are called then? Obviously, we need them to
> > be run, hence why I added the select here, but now I'm seeing a
> > construct like what's following acceptable then?
> 
> Even with your 'select', The runtime PM callbacks will never be called
> in the current driver.  pm_runtime_enable() doesn't do any runtime PM
> transitions.  It just allows transitions to happen when they're
> triggered by _get()/_put()/etc.

Actually, pm_runtime_get_sync is called by the SPI framework whenever
the device needs to be used. And pm_runtime_put whenever it's not used
anymore, so the callbacks are actually called.

> 
> > pm_runtime_enable(&pdev->dev);
> > if (!pm_runtime_enabled(&pdev->dev))
> >    sun6i_spi_runtime_resume(&pdev->dev);
> 
> Similarily here, it's not the pm_runtime_enable that will fail when
> runtime PM is disabled (or not built-in), it's a pm_runtime_get_sync()
> that will fail.

In the case where pm_runtime is disabled, pm_runtime_enabled will only
return false, and hence the resume callback will be called. get_sync
will fail too when the framework will call it, but since the device is
already initialized, it's fine I guess.

> What you want is something like this in ->probe()
> 
>    sun6i_spi_runtime_resume();
>    /* now, device is always activated whether or not runtime PM is enabled */
>    pm_runtime_enable();
>    pm_runtime_set_active();  /* tells runtime PM core device is
> already active */
>    pm_runtime_get_sync();
> 
> This 'get' will increase the usecount, but not actually call the
> callbacks because we told the RPM core that the device was already
> activated with _set_active().
> 
> And then, in ->remove(), you'll want
> 
>    pm_runtime_put();
>    pm_runtime_disable();
> 
> And if runtime PM is not enabled in the kernel, then the device will
> be left on (which is kinda what you want if you didn't build runtime
> PM into the kernel.)

Yes, but that also mean that the device is actually on after the
probe, even if it's never going to be used. From what I got reading
the pm_runtime code, the suspend callback is called only whenever you
call _put, so the device will be suspended only after it's been used
the first time, right?

Wouldn't it be better if it was suspended by default, and just waken
up whenever the framework needs it?

Thanks!
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

Attachment: signature.asc
Description: Digital signature