[RFC 10/16] drm/nouveau/timer: skip calibration on GK20A

From: Alexandre Courbot
Date: Fri Jan 31 2014 - 22:30:29 EST


GK20A's timer is directly attached to the system timer and cannot be
calibrated. Skip the calibration phase on that chip since the
corresponding registers do not exist.

Signed-off-by: Alexandre Courbot <acourbot@xxxxxxxxxx>
---
drivers/gpu/drm/nouveau/core/subdev/timer/nv04.c | 19 +++++++++++++------
1 file changed, 13 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/nouveau/core/subdev/timer/nv04.c b/drivers/gpu/drm/nouveau/core/subdev/timer/nv04.c
index c0bdd10..822fe0d 100644
--- a/drivers/gpu/drm/nouveau/core/subdev/timer/nv04.c
+++ b/drivers/gpu/drm/nouveau/core/subdev/timer/nv04.c
@@ -185,6 +185,10 @@ nv04_timer_init(struct nouveau_object *object)
if (ret)
return ret;

+ /* gk20a does not have the calibration registers */
+ if (device->chipset == 0xea)
+ goto skip_clk_init;
+
/* aim for 31.25MHz, which gives us nanosecond timestamps */
d = 1000000 / 32;

@@ -235,20 +239,23 @@ nv04_timer_init(struct nouveau_object *object)
d >>= 1;
}

- /* restore the time before suspend */
- lo = priv->suspend_time;
- hi = (priv->suspend_time >> 32);
-
nv_debug(priv, "input frequency : %dHz\n", f);
nv_debug(priv, "input multiplier: %d\n", m);
nv_debug(priv, "numerator : 0x%08x\n", n);
nv_debug(priv, "denominator : 0x%08x\n", d);
nv_debug(priv, "timer frequency : %dHz\n", (f * m) * d / n);
- nv_debug(priv, "time low : 0x%08x\n", lo);
- nv_debug(priv, "time high : 0x%08x\n", hi);

nv_wr32(priv, NV04_PTIMER_NUMERATOR, n);
nv_wr32(priv, NV04_PTIMER_DENOMINATOR, d);
+
+skip_clk_init:
+ /* restore the time before suspend */
+ lo = priv->suspend_time;
+ hi = (priv->suspend_time >> 32);
+
+ nv_debug(priv, "time low : 0x%08x\n", lo);
+ nv_debug(priv, "time high : 0x%08x\n", hi);
+
nv_wr32(priv, NV04_PTIMER_INTR_0, 0xffffffff);
nv_wr32(priv, NV04_PTIMER_INTR_EN_0, 0x00000000);
nv_wr32(priv, NV04_PTIMER_TIME_1, hi);
--
1.8.5.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/