Re: [PATCH RESEND] ARM: dts: add BeagleBone Audio Cape (Rev A) dtsi

[Nishanth Menon]

On 02/05/2014 07:48 AM, Jack Mitchell wrote:
> From: Jack Mitchell <jack@xxxxxxxxxxx>
> 
> Devicetree include file for setting up the am335x mcasp bus, i2c-2
> bus, and audio codec required for a functioning BeagleBone Audio Cape.
> 
> Signed-off-by: Jack Mitchell <jack@xxxxxxxxxxx>
> Signed-off-by: Matt Porter <mporter@xxxxxxxxxx>
> ---
>  arch/arm/boot/dts/am335x-bone-audio-cape-reva.dtsi | 124 +++++++++++++++++++++
>  arch/arm/boot/dts/am335x-bone-common.dtsi          |  14 +++
>  2 files changed, 138 insertions(+)
>  create mode 100644 arch/arm/boot/dts/am335x-bone-audio-cape-reva.dtsi
> 
> diff --git a/arch/arm/boot/dts/am335x-bone-audio-cape-reva.dtsi b/arch/arm/boot/dts/am335x-bone-audio-cape-reva.dtsi
> new file mode 100644
> index 0000000..b8ec3dc
> --- /dev/null
> +++ b/arch/arm/boot/dts/am335x-bone-audio-cape-reva.dtsi
> @@ -0,0 +1,124 @@
> +/*
> + * Copyright (C) 2014 Jack Mitchell <jack@xxxxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * In order to enable the BeagleBone Audio Cape this dtsi must be
> + * incuded in the top level dts. On BeagleBone Black hardware the
> + * status of the HDMI dts node must also be set to "disabled".
> + *
> + * --- a/arch/arm/boot/dts/am335x-bone.dts
> + * +++ b/arch/arm/boot/dts/am335x-bone.dts
> + * @@ -9,6 +9,7 @@
> + *
> + *  #include "am33xx.dtsi"
> + *  #include "am335x-bone-common.dtsi"
> + * +#include "am335x-bone-audio-cape-reva.dtsi"
> + *
> + *  &ldo3_reg {
> + *  	regulator-min-microvolt = <1800000>;
> + *
> + * On BeagleBone Black hardware the status of the HDMI dts node must
> + * also be set to "disabled"
> + *
> + * --- a/arch/arm/boot/dts/am335x-boneblack.dts
> + * +++ b/arch/arm/boot/dts/am335x-boneblack.dts
> + * @@ -73,6 +74,6 @@
> + *  		pinctrl-names = "default", "off";
> + *  		pinctrl-0 = <&nxp_hdmi_bonelt_pins>;
> + *  		pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>;
> + * -		status = "okay";
> + * +		status = "disabled";
> + *  	};
> + *  };
> + */
> +
how about making the audio-cape-reva.dts which includes and overrides
parameters of boneblack.dts?


Further, I see a bunch of capes in
http://elinux.org/Beagleboard:BeagleBone_Capes

Assuming that we dont want to discuss capebus all over again, is this
the approach we'd like to consider in the interim?

> +/ {
> +	sound {
> +		compatible = "ti,da830-evm-audio";
> +		ti,model = "AM335x BeagleBone Audio Cape Rev. A";
> +		ti,audio-codec = <&tlv320aic3106>;
> +		ti,mcasp-controller = <&mcasp0>;
> +		ti,codec-clock-rate = <12000000>;
> +		ti,audio-routing =
> +			"Headphone Jack",       "HPLOUT",
> +			"Headphone Jack",       "HPROUT",
> +			"LINE1L",               "Line In",
> +			"LINE1R",               "Line In";
> +	};
> +
> +	audio-cape-gpio-leds {
> +		compatible = "gpio-leds";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&bone_audio_cape_led_pins>;
> +
> +		audio-led0 {
> +			label = "audio:green:usr0";
> +			gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>;
> +			linux,default-trigger = "heartbeat";
> +			default-state = "off";
> +		};
> +
> +		audio-led1 {
> +			label = "audio:green:usr1";
> +			gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
> +			linux,default-trigger = "mmc0";
> +			default-state = "off";
> +		};
> +	};
> +};
> +
> +&am33xx_pinmux {
> +	bone_audio_cape_led_pins: pinmux_bone_audio_cape_led_pins {
> +		pinctrl-single,pins = <
> +			0x48 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a2.gpio1_18 */
> +			0x4c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a3.gpio1_19 */
> +		>;
> +	};
> +
> +	bone_audio_cape_pins: bone_audio_cape_pins {
> +		pinctrl-single,pins = <
> +			0x190 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mcasp0_aclkx.mcasp0_aclkx */
> +			0x194 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mcasp0_fsx.mcasp0_fsx */
> +			0x19c (PIN_INPUT_PULLUP | MUX_MODE2)	/* mcasp0_ahclkr.mcasp0_axr2 */
> +			0x1ac (PIN_INPUT_PULLUP | MUX_MODE2)	/* mcasp0_ahclkx.mcasp0_axr3 */
> +		>;
> +	};
> +};
> +
> +&i2c2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&i2c2_pins>;
> +
> +	status = "okay";
> +	clock-frequency = <100000>;
> +
> +	tlv320aic3106: tlv320aic3106@1b {
> +		compatible = "ti,tlv320aic3106";
> +		reg = <0x1b>;
> +		status = "okay";
> +
> +		/* Regulators */
> +		AVDD-supply = <&vmmcsd_fixed>;
> +		IOVDD-supply = <&vmmcsd_fixed>;
> +		DRVDD-supply = <&vmmcsd_fixed>;
> +		DVDD-supply = <&vdd1v8_fixed>;
> +	};
> +};
> +
> +&mcasp0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&bone_audio_cape_pins>;
> +
> +	status = "okay";
> +
> +	op-mode = <0>;      /* MCASP_IIS_MODE */
> +	tdm-slots = <2>;
> +	serial-dir = <      /* 0: INACTIVE, 1: TX, 2: RX */
> +		0 0 2 1
> +	>;
> +	tx-num-evt = <1>;
> +	rx-num-evt = <1>;
> +};
> diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi
> index e3f27ec..c1c0f74 100644
> --- a/arch/arm/boot/dts/am335x-bone-common.dtsi
> +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi
> @@ -62,12 +62,26 @@
>  		regulator-min-microvolt = <3300000>;
>  		regulator-max-microvolt = <3300000>;
>  	};
> +
> +	vdd1v8_fixed: fixedregulator@1 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vdd1v8_fixed";
> +		regulator-min-microvolt = <1800000>;
> +		regulator-max-microvolt = <1800000>;
> +	};
>  };
>  
>  &am33xx_pinmux {
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&clkout2_pin>;
>  
> +	i2c2_pins: pinmux_i2c2_pins {
> +		pinctrl-single,pins = <
> +			0x178 (PIN_INPUT_PULLUP | MUX_MODE3)  /* uart1_ctsn.i2c2_sda */
> +			0x17c (PIN_INPUT_PULLUP | MUX_MODE3)  /* uart1_rtsn.i2c2_scl */
> +		>;
> +	};
> +
>  	user_leds_s0: user_leds_s0 {
>  		pinctrl-single,pins = <
>  			0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a5.gpio1_21 */
> 


-- 
Regards,
Nishanth Menon
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/