[PATCH v2 2/9] HID: logitech-dj: remove hidinput_input_event

[Benjamin Tissoires]

hid-logitech-dj uses its own ->hidinput_input_event() instead of
the generic binding in hid-input.
Moving the handling of LEDs towards logi_dj_output_hidraw_report()
allows two things:
- remove hidinput_input_event in struct hid_device
- hidraw user space programs can also set the LEDs

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
---
 drivers/hid/hid-logitech-dj.c | 106 +++++++++++++++++-------------------------
 1 file changed, 42 insertions(+), 64 deletions(-)

diff --git a/drivers/hid/hid-logitech-dj.c b/drivers/hid/hid-logitech-dj.c
index f45279c..980ede5 100644
--- a/drivers/hid/hid-logitech-dj.c
+++ b/drivers/hid/hid-logitech-dj.c
@@ -44,14 +44,6 @@ static const char kbd_descriptor[] = {
 	0x19, 0xE0,		/*   USAGE_MINIMUM (Left Control)   */
 	0x29, 0xE7,		/*   USAGE_MAXIMUM (Right GUI)      */
 	0x81, 0x02,		/*   INPUT (Data,Var,Abs)       */
-	0x95, 0x05,		/*   REPORT COUNT (5)           */
-	0x05, 0x08,		/*   USAGE PAGE (LED page)      */
-	0x19, 0x01,		/*   USAGE MINIMUM (1)          */
-	0x29, 0x05,		/*   USAGE MAXIMUM (5)          */
-	0x91, 0x02,		/*   OUTPUT (Data, Variable, Absolute)  */
-	0x95, 0x01,		/*   REPORT COUNT (1)           */
-	0x75, 0x03,		/*   REPORT SIZE (3)            */
-	0x91, 0x01,		/*   OUTPUT (Constant)          */
 	0x95, 0x06,		/*   REPORT_COUNT (6)           */
 	0x75, 0x08,		/*   REPORT_SIZE (8)            */
 	0x15, 0x00,		/*   LOGICAL_MINIMUM (0)        */
@@ -60,6 +52,18 @@ static const char kbd_descriptor[] = {
 	0x19, 0x00,		/*   USAGE_MINIMUM (no event)       */
 	0x2A, 0xFF, 0x00,	/*   USAGE_MAXIMUM (reserved)       */
 	0x81, 0x00,		/*   INPUT (Data,Ary,Abs)       */
+	0x85, 0x0e,		/* REPORT_ID (14)               */
+	0x05, 0x08,		/*   USAGE PAGE (LED page)      */
+	0x95, 0x05,		/*   REPORT COUNT (5)           */
+	0x75, 0x01,		/*   REPORT SIZE (1)            */
+	0x15, 0x00,		/*   LOGICAL_MINIMUM (0)        */
+	0x25, 0x01,		/*   LOGICAL_MAXIMUM (1)        */
+	0x19, 0x01,		/*   USAGE MINIMUM (1)          */
+	0x29, 0x05,		/*   USAGE MAXIMUM (5)          */
+	0x91, 0x02,		/*   OUTPUT (Data, Variable, Absolute)  */
+	0x95, 0x01,		/*   REPORT COUNT (1)           */
+	0x75, 0x03,		/*   REPORT SIZE (3)            */
+	0x91, 0x01,		/*   OUTPUT (Constant)          */
 	0xC0
 };
 
@@ -544,10 +548,37 @@ static int logi_dj_output_hidraw_report(struct hid_device *hid, u8 * buf,
 					size_t count,
 					unsigned char report_type)
 {
-	/* Called by hid raw to send data */
-	dbg_hid("%s\n", __func__);
+	struct dj_device *djdev = hid->driver_data;
+	struct dj_receiver_dev *djrcv_dev = djdev->dj_receiver_dev;
+	u8 *out_buf;
+	int ret;
 
-	return 0;
+	if (buf[0] != REPORT_TYPE_LEDS)
+		return -EINVAL;
+
+	out_buf = kzalloc(DJREPORT_SHORT_LENGTH, GFP_ATOMIC);
+	if (!out_buf)
+		return -ENOMEM;
+
+	if (count < DJREPORT_SHORT_LENGTH - 2)
+		count = DJREPORT_SHORT_LENGTH - 2;
+
+	out_buf[0] = REPORT_ID_DJ_SHORT;
+	out_buf[1] = djdev->device_index;
+	memcpy(out_buf + 2, buf, count);
+
+	/*
+	 * hid-generic calls us with hid_output_raw_report(), but the LEDs
+	 * are set through a SET_REPORT command. It works for USB-HID devices
+	 * because usbhid either calls a SET_REPORT or directly send the output
+	 * report depending if the device presents an urbout.
+	 * Let be simple, send a SET_REPORT request.
+	 */
+	ret = hid_hw_raw_request(djrcv_dev->hdev, out_buf[0], out_buf,
+		DJREPORT_SHORT_LENGTH, report_type, HID_REQ_SET_REPORT);
+
+	kfree(out_buf);
+	return ret;
 }
 
 static void rdcat(char *rdesc, unsigned int *rsize, const char *data, unsigned int size)
@@ -613,58 +644,6 @@ static int logi_dj_ll_parse(struct hid_device *hid)
 	return retval;
 }
 
-static int logi_dj_ll_input_event(struct input_dev *dev, unsigned int type,
-				  unsigned int code, int value)
-{
-	/* Sent by the input layer to handle leds and Force Feedback */
-	struct hid_device *dj_hiddev = input_get_drvdata(dev);
-	struct dj_device *dj_dev = dj_hiddev->driver_data;
-
-	struct dj_receiver_dev *djrcv_dev =
-	    dev_get_drvdata(dj_hiddev->dev.parent);
-	struct hid_device *dj_rcv_hiddev = djrcv_dev->hdev;
-	struct hid_report_enum *output_report_enum;
-
-	struct hid_field *field;
-	struct hid_report *report;
-	unsigned char *data;
-	int offset;
-
-	dbg_hid("%s: %s, type:%d | code:%d | value:%d\n",
-		__func__, dev->phys, type, code, value);
-
-	if (type != EV_LED)
-		return -1;
-
-	offset = hidinput_find_field(dj_hiddev, type, code, &field);
-
-	if (offset == -1) {
-		dev_warn(&dev->dev, "event field not found\n");
-		return -1;
-	}
-	hid_set_field(field, offset, value);
-
-	data = hid_alloc_report_buf(field->report, GFP_ATOMIC);
-	if (!data) {
-		dev_warn(&dev->dev, "failed to allocate report buf memory\n");
-		return -1;
-	}
-
-	hid_output_report(field->report, &data[0]);
-
-	output_report_enum = &dj_rcv_hiddev->report_enum[HID_OUTPUT_REPORT];
-	report = output_report_enum->report_id_hash[REPORT_ID_DJ_SHORT];
-	hid_set_field(report->field[0], 0, dj_dev->device_index);
-	hid_set_field(report->field[0], 1, REPORT_TYPE_LEDS);
-	hid_set_field(report->field[0], 2, data[1]);
-
-	hid_hw_request(dj_rcv_hiddev, report, HID_REQ_SET_REPORT);
-
-	kfree(data);
-
-	return 0;
-}
-
 static int logi_dj_ll_start(struct hid_device *hid)
 {
 	dbg_hid("%s\n", __func__);
@@ -683,7 +662,6 @@ static struct hid_ll_driver logi_dj_ll_driver = {
 	.stop = logi_dj_ll_stop,
 	.open = logi_dj_ll_open,
 	.close = logi_dj_ll_close,
-	.hidinput_input_event = logi_dj_ll_input_event,
 };
 
 
-- 
1.8.3.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/