Re: [PATCH 1/2 v3] i2c: exynos5: add support for HSI2C on Exynos5260SoC

From: Tomasz Figa
Date: Thu Feb 06 2014 - 08:31:30 EST


Hi Naveen,

On 06.02.2014 13:06, Naveen Krishna Chatradhi wrote:
This patch implements a variant struct to handle the differences
(like fifo_depths) in the HSI2C modules across SoCs.

Adds a new compatible to support HSI2C module on Exynos5260.
Also resets the module as an init sequence (Needed by Exynos5260).

Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@xxxxxxxxxxx>
---
Changes since v2:
1. Used variant struct as suggested by Tomasz Figa.
2. Change compatible strings from samsung,exynos5-hsi2c to
samsung,exynos5250-hsi2c based on the first SoC to see the feature.
3. Using reset as init sequences.
4. Merged the 2 patches into one.

.../devicetree/bindings/i2c/i2c-exynos5.txt | 8 ++-
drivers/i2c/busses/i2c-exynos5.c | 64 ++++++++++++++++----
2 files changed, 58 insertions(+), 14 deletions(-)

diff --git a/Documentation/devicetree/bindings/i2c/i2c-exynos5.txt b/Documentation/devicetree/bindings/i2c/i2c-exynos5.txt
index 056732c..5bc4998 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-exynos5.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-exynos5.txt
@@ -5,7 +5,11 @@ at various speeds ranging from 100khz to 3.4Mhz.

Required properties:
- compatible: value should be.
- -> "samsung,exynos5-hsi2c", for i2c compatible with exynos5 hsi2c.

Device tree bindings need to be backwards compatible, so you need to keep this compatible string supported, just marked as (DEPRECATED).

Driver-wise, it will use the same driver data / variant struct as "samsung,exynos5250-hsi2c", just one more entry in OF match table is needed.

+ -> "samsung,exynos5250-hsi2c", for i2c compatible with HSI2C available
+ on Exynos5250 and Exynos5420 SoCs.
+ -> "samsung,exynos5260-hsi2c", for i2c compatible with HSI2C available
+ on Exynos5260 SoCs.
+
- reg: physical base address of the controller and length of memory mapped
region.
- interrupts: interrupt number to the cpu.
@@ -26,7 +30,7 @@ Optional properties:
Example:

hsi2c@12ca0000 {
- compatible = "samsung,exynos5-hsi2c";
+ compatible = "samsung,exynos5250-hsi2c";
reg = <0x12ca0000 0x100>;
interrupts = <56>;
clock-frequency = <100000>;

[snip]

@@ -483,6 +514,7 @@ static void exynos5_i2c_message_start(struct exynos5_i2c *i2c, int stop)
u32 i2c_auto_conf = 0;
u32 fifo_ctl;
unsigned long flags;
+ unsigned short trig_lvl;

i2c_ctl = readl(i2c->regs + HSI2C_CTL);
i2c_ctl &= ~(HSI2C_TXCHON | HSI2C_RXCHON);
@@ -493,13 +525,19 @@ static void exynos5_i2c_message_start(struct exynos5_i2c *i2c, int stop)

i2c_auto_conf = HSI2C_READ_WRITE;

- fifo_ctl |= HSI2C_RXFIFO_TRIGGER_LEVEL(HSI2C_DEF_TXFIFO_LVL);
+ trig_lvl = (i2c->msg->len > i2c->variant->fifo_depth) ?
+ (i2c->variant->fifo_depth * 3/4) : i2c->msg->len;
+ fifo_ctl |= HSI2C_RXFIFO_TRIGGER_LEVEL(trig_lvl);
+

This is a rather serious semantic change, that doesn't look to belong to this patch. If this is needed, it should be done in a separate patch.

int_en |= (HSI2C_INT_RX_ALMOSTFULL_EN |
HSI2C_INT_TRAILING_EN);
} else {
i2c_ctl |= HSI2C_TXCHON;

- fifo_ctl |= HSI2C_TXFIFO_TRIGGER_LEVEL(HSI2C_DEF_RXFIFO_LVL);
+ trig_lvl = (i2c->msg->len > i2c->variant->fifo_depth) ?
+ (i2c->variant->fifo_depth * 1/4) : i2c->msg->len;
+ fifo_ctl |= HSI2C_TXFIFO_TRIGGER_LEVEL(trig_lvl);
+

Ditto.

Best regards,
Tomasz
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/