Re: [PATCH v2 2/3] regulator: Add support for S2MPA01 regulator
From: Mark Rutland
Date: Wed Feb 12 2014 - 13:02:42 EST
On Thu, Jan 09, 2014 at 11:22:33AM +0000, Sachin Kamat wrote:
> Add support for S2MPA01 voltage and current regulator.
>
> Signed-off-by: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
> ---
> * Addressed comments from Mark Brown
> - Used module_platform_driver instead of subsys init call
> ---
> drivers/regulator/Kconfig | 7 +
> drivers/regulator/Makefile | 1 +
> drivers/regulator/s2mpa01.c | 482 +++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 490 insertions(+)
> create mode 100644 drivers/regulator/s2mpa01.c
[...]
> +static int s2mpa01_pmic_probe(struct platform_device *pdev)
> +{
> + struct sec_pmic_dev *iodev = dev_get_drvdata(pdev->dev.parent);
> + struct sec_platform_data *pdata = dev_get_platdata(iodev->dev);
> + struct of_regulator_match rdata[S2MPA01_REGULATOR_MAX];
> + struct device_node *reg_np = NULL;
> + struct regulator_config config = { };
> + struct s2mpa01_info *s2mpa01;
> + int i, ret;
> +
> + s2mpa01 = devm_kzalloc(&pdev->dev, sizeof(*s2mpa01), GFP_KERNEL);
> + if (!s2mpa01)
> + return -ENOMEM;
> +
> + for (i = 0; i < S2MPA01_REGULATOR_CNT; i++)
> + rdata[i].name = regulators[i].name;
> +
> + if (iodev->dev->of_node) {
> + reg_np = of_find_node_by_name(iodev->dev->of_node,
> + "regulators");
This walks the allnodes list, and can thus walk outside of the parent
node.
Use of_get_child_by_name instead.
> + if (!reg_np) {
> + dev_err(&pdev->dev,
> + "could not find regulators sub-node\n");
> + return -EINVAL;
> + }
> +
> + of_regulator_match(&pdev->dev, reg_np, rdata,
> + S2MPA01_REGULATOR_MAX);
Is a reference to reg_np held beyond this? Do you need an
of_node_put(reg_np)?
Thanks,
Mark.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/