[PATCH v3 0/3] dp83640: Get pin and master/slave configuration from DT

[Stefan SÃrensen]

This patch series add DT configuration to the DP83640 PHY driver and makes
the configuration of periodic output pins dynamic.

Changes since v2:
 - Add patch to properly configure perout triggers 0+1
 - Keep extts and perout numbers separate
 - Shorten pr_err lines

Changes since v1:
 - Add bindings documentation
 - Keep module parameters
 - Rename gpio->pin
 - Split patch into DT part and dynamic periodic output support

Stefan SÃrensen (3):
  net:phy:dp83640: Program pulsewidth2 values of perout triggers 0 and 1
  net:phy:dp83640: Support a configurable number of periodic outputs
  net:phy:dp83640: Get pin and master/slave configuration from DT

 Documentation/devicetree/bindings/net/dp83640.txt |  29 ++++
 drivers/net/phy/dp83640.c                         | 199 +++++++++++++++-------
 2 files changed, 170 insertions(+), 58 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/net/dp83640.txt

-- 
1.8.5.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/