Re: [PATCH 06/11] Input: synaptics-rmi4 - remove device_status form f01_data

[Christopher Heiny]

On 02/12/2014 09:27 PM, Dmitry Torokhov wrote:
> We do not need to persist it - we read it when signalled.
>
> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>

Acked-by: Christopher Heiny <cheiny@xxxxxxxxxxxxx>

> ---
>   drivers/input/rmi4/rmi_f01.c | 15 +++++++--------
>   1 file changed, 7 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/input/rmi4/rmi_f01.c b/drivers/input/rmi4/rmi_f01.c
> index 6f90a6c..1e49ab4 100644
> --- a/drivers/input/rmi4/rmi_f01.c
> +++ b/drivers/input/rmi4/rmi_f01.c
> @@ -126,8 +126,6 @@ struct f01_data {
>
>   	struct f01_device_control device_control;
>
> -	u8 device_status;
> -
>   	u16 interrupt_enable_addr;
>   	u16 doze_interval_addr;
>   	u16 wakeup_threshold_addr;
> @@ -212,6 +210,7 @@ static int rmi_f01_initialize(struct rmi_function *fn)
>   	struct rmi_driver_data *driver_data = dev_get_drvdata(&rmi_dev->dev);
>   	struct f01_data *data = fn->data;
>   	struct rmi_device_platform_data *pdata = to_rmi_platform_data(rmi_dev);
> +	u8 device_status;
>
>   	/*
>   	 * Set the configured bit and (optionally) other important stuff
> @@ -346,16 +345,16 @@ static int rmi_f01_initialize(struct rmi_function *fn)
>   	}
>
>   	error = rmi_read_block(rmi_dev, fn->fd.data_base_addr,
> -		&data->device_status, sizeof(data->device_status));
> +		&device_status, sizeof(device_status));
>   	if (error < 0) {
>   		dev_err(&fn->dev, "Failed to read device status.\n");
>   		return error;
>   	}
>
> -	if (RMI_F01_STATUS_UNCONFIGURED(data->device_status)) {
> +	if (RMI_F01_STATUS_UNCONFIGURED(device_status)) {
>   		dev_err(&fn->dev,
>   			"Device was reset during configuration process, status: %#02x!\n",
> -			RMI_F01_STATUS_CODE(data->device_status));
> +			RMI_F01_STATUS_CODE(device_status));
>   		return -EINVAL;
>   	}
>
> @@ -497,18 +496,18 @@ static int rmi_f01_attention(struct rmi_function *fn,
>   			     unsigned long *irq_bits)
>   {
>   	struct rmi_device *rmi_dev = fn->rmi_dev;
> -	struct f01_data *data = fn->data;
>   	int retval;
> +	u8 device_status;
>
>   	retval = rmi_read_block(rmi_dev, fn->fd.data_base_addr,
> -		&data->device_status, sizeof(data->device_status));
> +		&device_status, sizeof(device_status));
>   	if (retval < 0) {
>   		dev_err(&fn->dev, "Failed to read device status, code: %d.\n",
>   			retval);
>   		return retval;
>   	}
>
> -	if (RMI_F01_STATUS_UNCONFIGURED(data->device_status)) {
> +	if (RMI_F01_STATUS_UNCONFIGURED(device_status)) {
>   		dev_warn(&fn->dev, "Device reset detected.\n");
>   		retval = rmi_dev->driver->reset_handler(rmi_dev);
>   		if (retval < 0)


--

Christopher Heiny
Senior Staff Firmware Engineer
Synaptics Incorporated
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/