Re: [PATCH v2 2/2] USB: at91: using USBA_NR_DMAS for DMA channels

From: Nicolas Ferre
Date: Wed Feb 19 2014 - 03:44:35 EST


On 19/02/2014 03:07, Bo Shen :
> The SoCs earlier than sama5d3, they have the same number endpoints
> and DMA channels. In driver code, they use the same definition
> USBA_NR_ENDPOINTS for both endpoints and dma channels. However,
> in sama5d3, it has different number for endpoints and DMA channels.
> So, define a new micro USBA_NR_DMAs for DMA channels. And the

s/micro/macro/

> USBA_NR_ENDPOINS is not used anymore, remove it at the same time.
>
> Signed-off-by: Bo Shen <voice.shen@xxxxxxxxx>

Acked-by: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>

> ---
> Changes in v2:
> - Make the commit message more clearer.
>
> drivers/usb/gadget/atmel_usba_udc.c | 2 +-
> drivers/usb/gadget/atmel_usba_udc.h | 2 +-
> 2 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c
> index 7e67a81..5cded1c 100644
> --- a/drivers/usb/gadget/atmel_usba_udc.c
> +++ b/drivers/usb/gadget/atmel_usba_udc.c
> @@ -1661,7 +1661,7 @@ static irqreturn_t usba_udc_irq(int irq, void *devid)
> if (dma_status) {
> int i;
>
> - for (i = 1; i < USBA_NR_ENDPOINTS; i++)
> + for (i = 1; i < USBA_NR_DMAS; i++)
> if (dma_status & (1 << i))
> usba_dma_irq(udc, &udc->usba_ep[i]);
> }
> diff --git a/drivers/usb/gadget/atmel_usba_udc.h b/drivers/usb/gadget/atmel_usba_udc.h
> index 2922db5..a70706e 100644
> --- a/drivers/usb/gadget/atmel_usba_udc.h
> +++ b/drivers/usb/gadget/atmel_usba_udc.h
> @@ -210,7 +210,7 @@
> #define USBA_FIFO_BASE(x) ((x) << 16)
>
> /* Synth parameters */
> -#define USBA_NR_ENDPOINTS 7
> +#define USBA_NR_DMAS 7
>
> #define EP0_FIFO_SIZE 64
> #define EP0_EPT_SIZE USBA_EPT_SIZE_64
>


--
Nicolas Ferre
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/