Re: [PATCHv2 1/8] ARM: at91: Add at91sam9rl DT SoC support

[Nicolas Ferre]

On 20/02/2014 09:59, Boris BREZILLON :
> Hi Mark,
> 
> On 19/02/2014 18:54, Mark Rutland wrote:
>> On Wed, Feb 19, 2014 at 05:31:42PM +0000, Alexandre Belloni wrote:
>>> On 19/02/2014 at 17:00:20 +0000, Mark Rutland wrote :
>>>> On Wed, Feb 19, 2014 at 03:32:24PM +0000, Alexandre Belloni wrote:
>>>>> This adds preliminary DT support for the at91sam9rl.
>>>>>
>>>>> Signed-off-by: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
>>>>> ---
>>>>>   arch/arm/boot/dts/at91sam9rl.dtsi | 628 ++++++++++++++++++++++++++++++++++++++
>>>>>   arch/arm/mach-at91/at91sam9rl.c   |  16 +
>>>>>   2 files changed, 644 insertions(+)
>>>>>   create mode 100644 arch/arm/boot/dts/at91sam9rl.dtsi
>>>>   
>>>> [...]
>>>>
>>>>> +                       tcb0: timer@fffa0000 {
>>>>> +                               compatible = "atmel,at91rm9200-tcb";
>>>>> +                               reg = <0xfffa0000 0x100>;
>>>>> +                               interrupts = <16 IRQ_TYPE_LEVEL_HIGH 0
>>>>> +                                             17 IRQ_TYPE_LEVEL_HIGH 0
>>>>> +                                             18 IRQ_TYPE_LEVEL_HIGH 0>;
>>>>> +                       };
>>>> Nit: please bracket list entries individually. Also for other list
>>>> properties like reg and (*-)gpio(s).
>>>>
>>> OK.
>>>
>>>> [...]
>>>>
>>>>> +                       adc0: adc@fffd0000 {
>>>>> +                               compatible = "atmel,at91sam9260-adc";
>>>>> +                               reg = <0xfffd0000 0x100>;
>>>>> +                               interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
>>>>> +                               atmel,adc-use-external-triggers;
>>>>> +                               atmel,adc-channels-used = <0xf>;
>>>>> +                               atmel,adc-vref = <3300>;
>>>>> +                               atmel,adc-num-channels = <4>;
>>>>> +                               atmel,adc-startup-time = <15>;
>>>>> +                               atmel,adc-channel-base = <0x30>;
>>>>> +                               atmel,adc-drdy-mask = <0x10000>;
>>>>> +                               atmel,adc-status-register = <0x1c>;
>>>>> +                               atmel,adc-trigger-register = <0x04>;
>>>>> +                               atmel,adc-res = <8 10>;
>>>>> +                               atmel,adc-res-names = "lowres", "highres";
>>>>> +                               atmel,adc-use-res = "highres";
>>>>> +
>>>>> +                               trigger@0 {
>>>>> +                                       trigger-name = "timer-counter-0";
>>>>> +                                       trigger-value = <0x1>;
>>>>> +                               };
>>>> A unit-address should go with a reg value. Either this needs a reg and
>>>> the parent node needs #address-cells and #size-cells, or the
>>>> unit-address should go, and the names made unique through other means.
>>>>
>>> OK, I guess I'll have to fix
>>> Documentation/devicetree/bindings/arm/atmel-adc.txt too.
>> Yes please.
>>
>>>> [...]
>>>>
>>>>> +                       pinctrl@fffff400 {
>>>>> +                               #address-cells = <1>;
>>>>> +                               #size-cells = <1>;
>>>>> +                               compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
>>>> NAK. Either this is a atmel,at91rm9200-pinctrl node or a simple-bus. Not
>>>> both; that doesn't make any sense.
>>>>
>>> Simply a copy paste, I'll fix that here and also the 6 other atmel
>>> dtsi includes.
>>>
>>> What is your preference for those using:
>>> compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus"; ?
>> A node should by either a bus or a pinctrl node.
>>
>> If it has chidren then the simple-bus should be separated out into a
>> separate node. If there are no children simple-bus should go.
> 
> Doing this clearly break backward compatibility (the current pinctrl 
> drivers relies on
> gpio controller being subnodes of the pinctrl node), but I'm interested 
> in how you would
> have represented this.

Guys, just be warned, I do not plan to rework or even push for a rework
of the pinctrl driver anytime soon.

So I am afraid but you will have to live with this DT representation of
pinctrl for quite some time (even if it doesn't make sense, sorry Mark)...

> Could you give us an example ?
> 
> 
>>
>> Cheers,
>> Mark.
> 
> 
> 


-- 
Nicolas Ferre
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/