Re: [PATCH 3/4] HID: sony: do not rely on hid_output_raw_report

From: Benjamin Tissoires
Date: Mon Mar 03 2014 - 09:28:42 EST

Next message: Adam Thomson: "[PATCH Resend 2/2] rtc: da9055: Remove use of regmap_irq_get_virq()"
Previous message: Kishon Vijay Abraham I: "Re: [PATCH v6 5/8] phy: Add new Exynos USB PHY driver"
In reply to: Antonio Ospite: "Re: [PATCH 3/4] HID: sony: do not rely on hid_output_raw_report"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Sat, Mar 1, 2014 at 7:16 AM, Antonio Ospite <ao2@xxxxxx> wrote:
> Hi Benjamin,
>
> On Fri, 28 Feb 2014 19:20:36 -0500
> Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx> wrote:
>
>> hid_out_raw_report is going to be obsoleted as it is not part of the
>> unified HID low level transport documentation
>> (Documentation/hid/hid-transport.txt)
>>
>> To do so, we need to introduce two new quirks:
>> * HID_QUIRK_NO_OUTPUT_REPORTS: this quirks prevents the transport
>> driver to use the interrupt channel to send output report (and thus
>> force to use HID_REQ_SET_REPORT command)
>
> Maybe a little more informative name? Like:
> HID_QUIRK_NON_STD_OUTPUT_REPORTS
> or
> HID_QUIRK_NO_OUTPUT_REPORTS_ON_INTR_EP
> or expansions of the above.
>
> The rationale being that, from outside, these are still output reports
> (kind of), it's the channel they are sent over to which changes.

Sorry, putting names on things has always been my weakness. I like
more the second proposition, so I will pick it in the v2 unless
someone else complains.

>
> Another comment about a typo is inlined below.
>
> Thanks,
> Antonio
>
>> * HID_QUIRK_SKIP_OUTPUT_REPORT_ID: this one forces usbhid to not
>> include the report ID in the buffer it sends to the device through
>> HID_REQ_SET_REPORT in case of an output report
>>
>> This also fixes a regression introduced in commit 3a75b24949a8
>> (HID: hidraw: replace hid_output_raw_report() calls by appropriates ones).
>> The hidraw API was not able to communicate with the PS3 SixAxis
>> controllers in USB mode.
>>
>> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
>> ---
>> drivers/hid/hid-sony.c | 59 ++++++++++---------------------------------
>> drivers/hid/hidraw.c | 3 ++-
>> drivers/hid/usbhid/hid-core.c | 7 ++++-
>> include/linux/hid.h | 2 ++
>> 4 files changed, 24 insertions(+), 47 deletions(-)
>>
>> diff --git a/drivers/hid/hid-sony.c b/drivers/hid/hid-sony.c
>> index b5fe65e..08eac71 100644
>> --- a/drivers/hid/hid-sony.c
>> +++ b/drivers/hid/hid-sony.c
>> @@ -1007,45 +1007,6 @@ static int sony_mapping(struct hid_device *hdev, struct hid_input *hi,
>> }
>>
>> /*
>> - * The Sony Sixaxis does not handle HID Output Reports on the Interrupt EP
>> - * like it should according to usbhid/hid-core.c::usbhid_output_raw_report()
>> - * so we need to override that forcing HID Output Reports on the Control EP.
>> - *
>> - * There is also another issue about HID Output Reports via USB, the Sixaxis
>> - * does not want the report_id as part of the data packet, so we have to
>> - * discard buf[0] when sending the actual control message, even for numbered
>> - * reports, humpf!
>> - */
>> -static int sixaxis_usb_output_raw_report(struct hid_device *hid, __u8 *buf,
>> - size_t count, unsigned char report_type)
>> -{
>> - struct usb_interface *intf = to_usb_interface(hid->dev.parent);
>> - struct usb_device *dev = interface_to_usbdev(intf);
>> - struct usb_host_interface *interface = intf->cur_altsetting;
>> - int report_id = buf[0];
>> - int ret;
>> -
>> - if (report_type == HID_OUTPUT_REPORT) {
>> - /* Don't send the Report ID */
>> - buf++;
>> - count--;
>> - }
>> -
>> - ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
>> - HID_REQ_SET_REPORT,
>> - USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
>> - ((report_type + 1) << 8) | report_id,
>> - interface->desc.bInterfaceNumber, buf, count,
>> - USB_CTRL_SET_TIMEOUT);
>> -
>> - /* Count also the Report ID, in case of an Output report. */
>> - if (ret > 0 && report_type == HID_OUTPUT_REPORT)
>> - ret++;
>> -
>> - return ret;
>> -}
>> -
>> -/*
>> * Sending HID_REQ_GET_REPORT changes the operation mode of the ps3 controller
>> * to "operational". Without this, the ps3 controller will not report any
>> * events.
>> @@ -1305,11 +1266,8 @@ static void sixaxis_state_worker(struct work_struct *work)
>> buf[10] |= sc->led_state[2] << 3;
>> buf[10] |= sc->led_state[3] << 4;
>>
>> - if (sc->quirks & SIXAXIS_CONTROLLER_USB)
>> - hid_output_raw_report(sc->hdev, buf, sizeof(buf), HID_OUTPUT_REPORT);
>> - else
>> - hid_hw_raw_request(sc->hdev, 0x01, buf, sizeof(buf),
>> - HID_OUTPUT_REPORT, HID_REQ_SET_REPORT);
>> + hid_hw_raw_request(sc->hdev, 0x01, buf, sizeof(buf), HID_OUTPUT_REPORT,
>> + HID_REQ_SET_REPORT);
>> }
>>
>> static void dualshock4_state_worker(struct work_struct *work)
>> @@ -1659,7 +1617,18 @@ static int sony_probe(struct hid_device *hdev, const struct hid_device_id *id)
>> }
>>
>> if (sc->quirks & SIXAXIS_CONTROLLER_USB) {
>> - hdev->hid_output_raw_report = sixaxis_usb_output_raw_report;
>> + /*
>> + * The Sony Sixaxis does not handle HID Output Reports on the
>> + * Interrupt EP like it could, so we need to forcing HID Output
> ^^^^
> typo: "we need to force".
>

k, will fix in v2.

Thanks,
Benjamin

>> + * Reports to use HID_REQ_SET_REPORT on the Control EP.
>> + *
>> + * There is also another issue about HID Output Reports via USB,
>> + * the Sixaxis does not want the report_id as part of the data
>> + * packet, so we have to discard buf[0] when sending the actual
>> + * control message, even for numbered reports, humpf!
>> + */
>> + hdev->quirks |= HID_QUIRK_NO_OUTPUT_REPORTS;
>> + hdev->quirks |= HID_QUIRK_SKIP_OUTPUT_REPORT_ID;
>> ret = sixaxis_set_operational_usb(hdev);
>> sc->worker_initialized = 1;
>> INIT_WORK(&sc->state_worker, sixaxis_state_worker);
>> diff --git a/drivers/hid/hidraw.c b/drivers/hid/hidraw.c
>> index 2cc484c..6537e58 100644
>> --- a/drivers/hid/hidraw.c
>> +++ b/drivers/hid/hidraw.c
>> @@ -149,7 +149,8 @@ static ssize_t hidraw_send_report(struct file *file, const char __user *buffer,
>> goto out_free;
>> }
>>
>> - if (report_type == HID_OUTPUT_REPORT) {
>> + if ((report_type == HID_OUTPUT_REPORT) &&
>> + !(dev->quirks & HID_QUIRK_NO_OUTPUT_REPORTS)) {
>> ret = hid_hw_output_report(dev, buf, count);
>> /*
>> * compatibility with old implementation of USB-HID and I2C-HID:
>> diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c
>> index 0d1d875..3bc7cad 100644
>> --- a/drivers/hid/usbhid/hid-core.c
>> +++ b/drivers/hid/usbhid/hid-core.c
>> @@ -894,7 +894,12 @@ static int usbhid_set_raw_report(struct hid_device *hid, unsigned int reportnum,
>> int ret, skipped_report_id = 0;
>>
>> /* Byte 0 is the report number. Report data starts at byte 1.*/
>> - buf[0] = reportnum;
>> + if ((rtype == HID_OUTPUT_REPORT) &&
>> + (hid->quirks & HID_QUIRK_SKIP_OUTPUT_REPORT_ID))
>> + buf[0] = 0;
>> + else
>> + buf[0] = reportnum;
>> +
>> if (buf[0] == 0x0) {
>> /* Don't send the Report ID */
>> buf++;
>> diff --git a/include/linux/hid.h b/include/linux/hid.h
>> index 5eb282e..2baf834 100644
>> --- a/include/linux/hid.h
>> +++ b/include/linux/hid.h
>> @@ -287,6 +287,8 @@ struct hid_item {
>> #define HID_QUIRK_NO_EMPTY_INPUT 0x00000100
>> #define HID_QUIRK_NO_INIT_INPUT_REPORTS 0x00000200
>> #define HID_QUIRK_SKIP_OUTPUT_REPORTS 0x00010000
>> +#define HID_QUIRK_SKIP_OUTPUT_REPORT_ID 0x00020000
>> +#define HID_QUIRK_NO_OUTPUT_REPORTS 0x00040000
>> #define HID_QUIRK_FULLSPEED_INTERVAL 0x10000000
>> #define HID_QUIRK_NO_INIT_REPORTS 0x20000000
>> #define HID_QUIRK_NO_IGNORE 0x40000000
>> --
>> 1.8.5.3
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-input" in
>> the body of a message to majordomo@xxxxxxxxxxxxxxx
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
> --
> Antonio Ospite
> http://ao2.it
>
> A: Because it messes up the order in which people normally read text.
> See http://en.wikipedia.org/wiki/Posting_style
> Q: Why is top-posting such a bad thing?
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Adam Thomson: "[PATCH Resend 2/2] rtc: da9055: Remove use of regmap_irq_get_virq()"
Previous message: Kishon Vijay Abraham I: "Re: [PATCH v6 5/8] phy: Add new Exynos USB PHY driver"
In reply to: Antonio Ospite: "Re: [PATCH 3/4] HID: sony: do not rely on hid_output_raw_report"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]