[PATCH 3.13 121/172] usb: gadget: bcm63xx_udc: fix build failure on DMA channel code

From: Greg Kroah-Hartman
Date: Tue Mar 04 2014 - 15:59:30 EST

Next message: Greg Kroah-Hartman: "[PATCH 3.13 112/172] PCI: mvebu: Use Device ID and revision from underlying endpoint"
Previous message: Greg Kroah-Hartman: "[PATCH 3.13 128/172] workqueue: ensure @task is valid across kthread_stop()"
In reply to: Greg Kroah-Hartman: "[PATCH 3.13 128/172] workqueue: ensure @task is valid across kthread_stop()"
Next in thread: Greg Kroah-Hartman: "[PATCH 3.13 112/172] PCI: mvebu: Use Device ID and revision from underlying endpoint"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

3.13-stable review patch. If anyone has any objections, please let me know.

------------------

From: Florian Fainelli <florian@xxxxxxxxxxx>

commit 2d1f7af3d60dd09794e0738a915d272c6c27abc5 upstream.

Commit 3dc6475 ("bcm63xx_enet: add support Broadcom BCM6345 Ethernet")
changed the ENETDMA[CS] macros such that they are no longer macros, but
actual register offset definitions. The bcm63xx_udc driver was not
updated, and as a result, causes the following build error to pop up:

CC drivers/usb/gadget/u_ether.o
drivers/usb/gadget/bcm63xx_udc.c: In function 'iudma_write':
drivers/usb/gadget/bcm63xx_udc.c:642:24: error: called object '0' is not
a function
drivers/usb/gadget/bcm63xx_udc.c: In function 'iudma_reset_channel':
drivers/usb/gadget/bcm63xx_udc.c:698:46: error: called object '0' is not
a function
drivers/usb/gadget/bcm63xx_udc.c:700:49: error: called object '0' is not
a function

Fix this by updating usb_dmac_{read,write}l and usb_dmas_{read,write}l to
take an extra channel argument, and use the channel width
(ENETDMA_CHAN_WIDTH) to offset the register we want to access, hence
doing again what the macro implicitely did for us.

Cc: Kevin Cernekee <cernekee@xxxxxxxxx>
Cc: Jonas Gorski <jogo@xxxxxxxxxxx>
Signed-off-by: Florian Fainelli <florian@xxxxxxxxxxx>
Signed-off-by: Felipe Balbi <balbi@xxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
drivers/usb/gadget/bcm63xx_udc.c | 58 +++++++++++++++++++++------------------
1 file changed, 32 insertions(+), 26 deletions(-)

--- a/drivers/usb/gadget/bcm63xx_udc.c
+++ b/drivers/usb/gadget/bcm63xx_udc.c
@@ -361,24 +361,30 @@ static inline void usb_dma_writel(struct
bcm_writel(val, udc->iudma_regs + off);
}

-static inline u32 usb_dmac_readl(struct bcm63xx_udc *udc, u32 off)
+static inline u32 usb_dmac_readl(struct bcm63xx_udc *udc, u32 off, int chan)
{
- return bcm_readl(udc->iudma_regs + IUDMA_DMAC_OFFSET + off);
+ return bcm_readl(udc->iudma_regs + IUDMA_DMAC_OFFSET + off +
+ (ENETDMA_CHAN_WIDTH * chan));
}

-static inline void usb_dmac_writel(struct bcm63xx_udc *udc, u32 val, u32 off)
+static inline void usb_dmac_writel(struct bcm63xx_udc *udc, u32 val, u32 off,
+ int chan)
{
- bcm_writel(val, udc->iudma_regs + IUDMA_DMAC_OFFSET + off);
+ bcm_writel(val, udc->iudma_regs + IUDMA_DMAC_OFFSET + off +
+ (ENETDMA_CHAN_WIDTH * chan));
}

-static inline u32 usb_dmas_readl(struct bcm63xx_udc *udc, u32 off)
+static inline u32 usb_dmas_readl(struct bcm63xx_udc *udc, u32 off, int chan)
{
- return bcm_readl(udc->iudma_regs + IUDMA_DMAS_OFFSET + off);
+ return bcm_readl(udc->iudma_regs + IUDMA_DMAS_OFFSET + off +
+ (ENETDMA_CHAN_WIDTH * chan));
}

-static inline void usb_dmas_writel(struct bcm63xx_udc *udc, u32 val, u32 off)
+static inline void usb_dmas_writel(struct bcm63xx_udc *udc, u32 val, u32 off,
+ int chan)
{
- bcm_writel(val, udc->iudma_regs + IUDMA_DMAS_OFFSET + off);
+ bcm_writel(val, udc->iudma_regs + IUDMA_DMAS_OFFSET + off +
+ (ENETDMA_CHAN_WIDTH * chan));
}

static inline void set_clocks(struct bcm63xx_udc *udc, bool is_enabled)
@@ -639,7 +645,7 @@ static void iudma_write(struct bcm63xx_u
} while (!last_bd);

usb_dmac_writel(udc, ENETDMAC_CHANCFG_EN_MASK,
- ENETDMAC_CHANCFG_REG(iudma->ch_idx));
+ ENETDMAC_CHANCFG_REG, iudma->ch_idx);
}

/**
@@ -695,9 +701,9 @@ static void iudma_reset_channel(struct b
bcm63xx_fifo_reset_ep(udc, max(0, iudma->ep_num));

/* stop DMA, then wait for the hardware to wrap up */
- usb_dmac_writel(udc, 0, ENETDMAC_CHANCFG_REG(ch_idx));
+ usb_dmac_writel(udc, 0, ENETDMAC_CHANCFG_REG, ch_idx);

- while (usb_dmac_readl(udc, ENETDMAC_CHANCFG_REG(ch_idx)) &
+ while (usb_dmac_readl(udc, ENETDMAC_CHANCFG_REG, ch_idx) &
ENETDMAC_CHANCFG_EN_MASK) {
udelay(1);

@@ -714,10 +720,10 @@ static void iudma_reset_channel(struct b
dev_warn(udc->dev, "forcibly halting IUDMA channel %d\n",
ch_idx);
usb_dmac_writel(udc, ENETDMAC_CHANCFG_BUFHALT_MASK,
- ENETDMAC_CHANCFG_REG(ch_idx));
+ ENETDMAC_CHANCFG_REG, ch_idx);
}
}
- usb_dmac_writel(udc, ~0, ENETDMAC_IR_REG(ch_idx));
+ usb_dmac_writel(udc, ~0, ENETDMAC_IR_REG, ch_idx);

/* don't leave "live" HW-owned entries for the next guy to step on */
for (d = iudma->bd_ring; d <= iudma->end_bd; d++)
@@ -729,11 +735,11 @@ static void iudma_reset_channel(struct b

/* set up IRQs, UBUS burst size, and BD base for this channel */
usb_dmac_writel(udc, ENETDMAC_IR_BUFDONE_MASK,
- ENETDMAC_IRMASK_REG(ch_idx));
- usb_dmac_writel(udc, 8, ENETDMAC_MAXBURST_REG(ch_idx));
+ ENETDMAC_IRMASK_REG, ch_idx);
+ usb_dmac_writel(udc, 8, ENETDMAC_MAXBURST_REG, ch_idx);

- usb_dmas_writel(udc, iudma->bd_ring_dma, ENETDMAS_RSTART_REG(ch_idx));
- usb_dmas_writel(udc, 0, ENETDMAS_SRAM2_REG(ch_idx));
+ usb_dmas_writel(udc, iudma->bd_ring_dma, ENETDMAS_RSTART_REG, ch_idx);
+ usb_dmas_writel(udc, 0, ENETDMAS_SRAM2_REG, ch_idx);
}

/**
@@ -2036,7 +2042,7 @@ static irqreturn_t bcm63xx_udc_data_isr(
spin_lock(&udc->lock);

usb_dmac_writel(udc, ENETDMAC_IR_BUFDONE_MASK,
- ENETDMAC_IR_REG(iudma->ch_idx));
+ ENETDMAC_IR_REG, iudma->ch_idx);
bep = iudma->bep;
rc = iudma_read(udc, iudma);

@@ -2176,18 +2182,18 @@ static int bcm63xx_iudma_dbg_show(struct
seq_printf(s, " [ep%d]:\n",
max_t(int, iudma_defaults[ch_idx].ep_num, 0));
seq_printf(s, " cfg: %08x; irqstat: %08x; irqmask: %08x; maxburst: %08x\n",
- usb_dmac_readl(udc, ENETDMAC_CHANCFG_REG(ch_idx)),
- usb_dmac_readl(udc, ENETDMAC_IR_REG(ch_idx)),
- usb_dmac_readl(udc, ENETDMAC_IRMASK_REG(ch_idx)),
- usb_dmac_readl(udc, ENETDMAC_MAXBURST_REG(ch_idx)));
+ usb_dmac_readl(udc, ENETDMAC_CHANCFG_REG, ch_idx),
+ usb_dmac_readl(udc, ENETDMAC_IR_REG, ch_idx),
+ usb_dmac_readl(udc, ENETDMAC_IRMASK_REG, ch_idx),
+ usb_dmac_readl(udc, ENETDMAC_MAXBURST_REG, ch_idx));

- sram2 = usb_dmas_readl(udc, ENETDMAS_SRAM2_REG(ch_idx));
- sram3 = usb_dmas_readl(udc, ENETDMAS_SRAM3_REG(ch_idx));
+ sram2 = usb_dmas_readl(udc, ENETDMAS_SRAM2_REG, ch_idx);
+ sram3 = usb_dmas_readl(udc, ENETDMAS_SRAM3_REG, ch_idx);
seq_printf(s, " base: %08x; index: %04x_%04x; desc: %04x_%04x %08x\n",
- usb_dmas_readl(udc, ENETDMAS_RSTART_REG(ch_idx)),
+ usb_dmas_readl(udc, ENETDMAS_RSTART_REG, ch_idx),
sram2 >> 16, sram2 & 0xffff,
sram3 >> 16, sram3 & 0xffff,
- usb_dmas_readl(udc, ENETDMAS_SRAM4_REG(ch_idx)));
+ usb_dmas_readl(udc, ENETDMAS_SRAM4_REG, ch_idx));
seq_printf(s, " desc: %d/%d used", iudma->n_bds_used,
iudma->n_bds);

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Greg Kroah-Hartman: "[PATCH 3.13 112/172] PCI: mvebu: Use Device ID and revision from underlying endpoint"
Previous message: Greg Kroah-Hartman: "[PATCH 3.13 128/172] workqueue: ensure @task is valid across kthread_stop()"
In reply to: Greg Kroah-Hartman: "[PATCH 3.13 128/172] workqueue: ensure @task is valid across kthread_stop()"
Next in thread: Greg Kroah-Hartman: "[PATCH 3.13 112/172] PCI: mvebu: Use Device ID and revision from underlying endpoint"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]